我正在Arducopter v3.6.4上使用Pixhawk 2.1多维数据集，并带有运行dronekit脚本的Raspberry Pi 3 ModelB。我要做的是起飞，到达某个地点并降落在那儿，过一会儿再起飞，然后返回家乡或其他地点。我尝试在SITL上运行它，但未成功。
我所做的是将无人机工具箱中的模式从GUIDED更改为LAND以便将无人机降落到某个点，然后运行arm_and_takeoff（）函数，但是一旦电动机在降落后解除了自身的武装，它便拒绝了武装。我只能中断脚本，如果我再次运行代码，则电机照常运转。
所以我想做的是 -手臂和起飞 -前往Waypoint 1 -在第1点降落并停留一段时间 -手臂再起飞 -前往其他地点或回家
但是代码只运行到第3步，在撤防电机后，它们也不会自行撤防。
我阅读了peterbarker https://github.com/peterbarker上的一篇文章，内容涉及RTL模式（如果着陆时停止这种电机撤防），但我无法在SITL上使用它。 https://github.com/ArduPilot/ardupilot/pull/6914
from dronekit import connect, VehicleMode, LocationGlobal, LocationGlobalRelative, Command
from pymavlink import mavutil # Needed for command message definitions
import time
import math
# Set up option parsing to get connection string
import argparse
parser = argparse.ArgumentParser(description='Control Copter and send commands in GUIDED mode ')
parser.add_argument('--connect',
help="Vehicle connection target string. If not specified, SITL automatically started and used.")
args = parser.parse_args()
connection_string = args.connect
sitl = None
# Start SITL if no connection string specified
if not connection_string:
import dronekit_sitl
sitl = dronekit_sitl.start_default()
connection_string = sitl.connection_string()
# Connect to the Vehicle
print 'Connecting to vehicle on: %s' % connection_string
vehicle = connect(connection_string, wait_ready=True)
def arm_and_takeoff(aTargetAltitude):
"""
Arms vehicle and fly to aTargetAltitude.
"""
print "Basic pre-arm checks"
# Don't let the user try to arm until autopilot is ready
while not vehicle.is_armable:
print " Waiting for vehicle to initialise..."
time.sleep(1)
print "Arming motors"
# Copter should arm in GUIDED mode
vehicle.mode = VehicleMode("GUIDED")
vehicle.armed = True
while not vehicle.armed:
print " Waiting for arming..."
time.sleep(1)
print "Taking off!"
vehicle.simple_takeoff(aTargetAltitude) # Take off to target altitude
# Wait until the vehicle reaches a safe height before processing the goto (otherwise the command
# after Vehicle.simple_takeoff will execute immediately).
while True:
print " Altitude: ", vehicle.location.global_relative_frame.alt
if vehicle.location.global_relative_frame.alt >= aTargetAltitude * 0.95: # Trigger just below target alt.
print "Reached target altitude"
break
time.sleep(1)
def set_velocity_body(vehicle, vx, vy, vz):
""" Remember: vz is positive downward!!!
http://ardupilot.org/dev/docs/copter-commands-in-guided-mode.html
Bitmask to indicate which dimensions should be ignored by the vehicle
(a value of 0b0000000000000000 or 0b0000001000000000 indicates that
none of the setpoint dimensions should be ignored). Mapping:
bit 1: x, bit 2: y, bit 3: z,
bit 4: vx, bit 5: vy, bit 6: vz,
bit 7: ax, bit 8: ay, bit 9:
"""
msg = vehicle.message_factory.set_position_target_local_ned_encode(
0,
0, 0,
mavutil.mavlink.MAV_FRAME_BODY_NED,
0b0000111111000111, # -- BITMASK -> Consider only the velocities
0, 0, 0, # -- POSITION
vx, vy, vz, # -- VELOCITY
0, 0, 0, # -- ACCELERATIONS
0, 0)
vehicle.send_mavlink(msg)
vehicle.flush()
def goto_location(waypoint):
vehicle.simple_goto(waypoint)
time.sleep(2)
reached = 0
while(not reached):
time.sleep(1)
a = vehicle.velocity
if (abs(a[1])< 0.2 and abs(a[2])< 0.2 and abs(a[0])< 0.2):
reached = 1
print "Waypoint reached!"
def battery_check():
if(vehicle.battery < 9.9):
print ("Battery Low. Landing")
print "Battery: %s" % vehicle.battery
land()
else:
print "Battery: %s" % vehicle.battery
def land():
print("Vehicle in LAND mode")
vehicle.mode = VehicleMode("LAND")
while not vehicle.location.global_relative_frame.alt==0:
if vehicle.location.global_relative_frame.alt < 2:
set_velocity_body(vehicle,0,0,0.1)
vehicle.armed = False
vehicle.close()
def temp_land():
print("Vehicle in LAND mode")
vehicle.mode = VehicleMode("LAND")
while not vehicle.location.global_relative_frame.alt==0:
if vehicle.location.global_relative_frame.alt < 2:
set_velocity_body(vehicle,0,0,0.1)
print ("Vehicle in AUTO mode")
vehicle.mode = VehicleMode("AUTO")
def rtl():
print("Vehicle Returning to LAND mode")
vehicle.mode = VehicleMode("RTL")
def delay(sec):
print "Hover for %s Seconds" % sec
time.sleep(sec)
###################################################################################
################################ START CODE #######################################
###################################################################################
############# POINTS ###############
p1 = LocationGlobalRelative(24.830125, 67.097387, 15)
############# TAKE OFF #############
arm_and_takeoff(15) # Vehicle takeoff
home = vehicle.location.global_frame #HOME
print "Reached Target Altitude"
print "Altitude: ", vehicle.location.global_relative_frame.alt
print "Home Location: %s" % home
delay(1)
battery_check()
############# POINT 1 ##############
print "Going to Point 1"
goto_location(p1)
print "Reached Point 1"
print "Location: %s" % vehicle.location.global_frame
delay(1)
battery_check()
############### LAND ################
temp_land()
############ RETURN TO HOME ##########
print "Going to Home"
goto_location(home)
print "Reached Home"
print "Location: %s" % vehicle.location.global_frame
delay(1)
battery_check()
############# LAND #################
rtl() # Land vehicle once mission is over
vehicle.flush()
vehicle.close()
print "Exiting Script"
###################################################################################
################################# END CODE ########################################
###################################################################################
反正有什么办法解决这个问题？
谢谢。
致谢
答案 0 :(得分：0)
找到一种解决此问题的方法。在降落代码后必须重新连接车辆，并且一旦降落也要更改其名称。
如果我在不更改车辆变量的情况下重新连接它，它确实起飞了，但第二次没有降落。
我确实希望还有另一种方法。