Question

我正在尝试从操纵杆接收输入。收到输入后应该产生声音。这有效，但它响应操纵杆按钮的推动和释放。我如何让它只响应推送而不是发布。

更重要的是，如何让事件监听器响应操纵杆的180度移动。目前，当我移动操纵杆时，它会继续产生声音，即使在我释放它之后很长时间

 Hid myHid;

HidMsg msg;

0=>int device;

if(!myHid.openJoystick(device)){
<<<"Couldn't">>>;
me.exit();
}

<<<"Ready">>>;

SndBuf coin=>dac;
  0.6=>coin.gain;
0=>coin.pos;



while(1){

    myHid=>now;
    while(myHid.recv(msg)){
        <<<"Rev">>>;

        me.dir()+"/audio/smw_jump.wav"=> coin.read;
        .2::second=>now;


        }

    }

Answer 1

  // make HidIn and HidMsg
      Hid hi;
    HidMsg msg;

   SndBuf jump=>dac;
  SndBuf coin=>dac;
 SndBuf power_up=>dac;
  SndBuf blaster=>dac;


0.85=>coin.gain;
0=>coin.pos;

.6=>jump.gain;
 0=>jump.pos;

.85=>power_up.gain;
0=>power_up.pos;

.6=>blaster.gain;
0=>blaster.pos;

 // which joystick
  0 => int device;
 // get from command line
 if( me.args() ) me.arg(0) => Std.atoi => device;

 // open joystick 0, exit on fail
 if( !hi.openJoystick( device ) ) me.exit();

<<< "joystick '" + hi.name() + "' ready", "" >>>;

 // infinite event loop
  while( true )
 {
// wait on HidIn as event
hi => now;

// messages received
while( hi.recv( msg ) )
{
    // joystick axis motion
    if( msg.isAxisMotion() )
    {

        //this is where we pan
        <<< "joystick axis", msg.which, ":", msg.axisPosition >>>;
        // OR
        //if (msg.which == 0) <<< "joystick axis", msg.which, ":",    msg.axisPosition >>>;
        //if (msg.which == 1) <<< "joystick axis", msg.which, ":", msg.axisPosition >>>;
    }

    // joystick button down
    else if( msg.isButtonDown() )
    {

        <<< "joystick button", msg.which, "down" >>>;

        if(msg.which==0){
            me.dir()+"/audio/Laser Blasts-SoundBible.com-108608437.wav"=> blaster.read;
        .2::second=>now;

            }

            if(msg.which==4 || msg.which==2 ||msg.which==3 ||msg.which==5){
                me.dir()+"/audio/smw_coin.wav"=> jump.read;
                .2::second=>now;
            }

    }

    // joystick button up
    else if( msg.isButtonUp() )
    {
        <<< "joystick button", msg.which, "up" >>>;
    }

    // joystick hat/POV switch/d-pad motion
    else if( msg.isHatMotion()  && msg.idata==0)
    {
        <<< "joystick hat", msg.which, ":", msg.idata >>>;
        me.dir()+"/audio/smb_powerup.wav"=> power_up.read;
                .2::second=>now;

    }
}
}

ChucK操纵杆控制

1 个答案: