Question

/*


 Arduino with Ethernet Shield
 */

#include <SPI.h>
#include <Ethernet.h>
#include <Servo.h> 
int led = 4;
Servo microservo; 
int pos = 0; 
byte mac[ ] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED };   //physical mac address
byte ip[ ] = { 10, 0,1,6 };                      // ip in lan (that's what you need to use in your browser. ("10.0.1.2")
byte gateway[ ] = { 10,0, 1, 25 };                   // internet access via router
byte subnet[ ] = { 255, 255, 255, 0 };                  //subnet mask
EthernetServer server(80);                             //server port     
String readString;

void setup() {
 // Open serial communications and wait for port to open:
  Serial.begin(9600);
   while (!Serial) {
    ; // wait for serial port to connect. Needed for Leonardo only
  }
  pinMode(led, OUTPUT);
  microservo.attach(7);
  // start the Ethernet connection and the server:
  Ethernet.begin(mac, ip, gateway, subnet);
  server.begin();
  Serial.print("server is at ");
  Serial.println(Ethernet.localIP());
}


void loop() {
  // Create a client connection
  EthernetClient client = server.available();
  if (client) {
    while (client.connected()) {   
      if (client.available()) {
        char c = client.read();

        //read char by char HTTP request
        if (readString.length() < 100) {
          //store characters to string
          readString += c;
          //Serial.print(c);
         }

         //if HTTP request has ended
         if (c == '\n') {          
           Serial.println(readString); //print to serial monitor for debuging


           client.println("HTTP/1.1 200 OK"); //send new page
           client.println("Content-Type: text/html");
           client.println();     
           client.println("<HTML>");
           client.println("<HEAD>");
           client.println("<meta name='apple-mobile-web-app-capable' content='yes' />");
           client.println("<meta name='apple-mobile-web-app-status-bar-style' content='black-translucent' />");
           client.println("<link rel='stylesheet' type='text/css' href='http://10.0.1.2/top.htm' />");
           client.println("<TITLE>Arduino Home Security System</TITLE>");
           client.println("</HEAD>");
           client.println("<BODY>");
           client.println("<H1>Abel & Herwandi</H1>");
           client.println("<hr />");
           client.println("<br />");  
           client.println("<H2>Arduino with Ethernet Shield</H2>");
           client.println("<br />");  
           client.println("<a href=\"/?button1on\"\">Turn On LED</a>");
           client.println("<a href=\"/?button1off\"\">Turn Off LED</a><br />");   
           client.println("<br />");     
           client.println("<br />"); 
           client.println("<a href=\"/?button2on\"\">Rotate Left</a>");
           client.println("<a href=\"/?button2off\"\">Rotate Right</a><br />"); 
           client.println("<p>Designed by Abel & Herwandi. SCUT Class 5</p>");  
           client.println("<br />"); 
           client.println("</BODY>");
           client.println("</HTML>");

           delay(1);
           //stopping client
           client.stop();
           //controls the Arduino if you press the buttons
           if (readString.indexOf("?button1on") >0){
               digitalWrite(led, HIGH);

           }
           if (readString.indexOf("?button1off") >0){
               digitalWrite(led, LOW);
           }
           if (readString.indexOf("?button2on") >0){
                for(pos = 0; pos < 180; pos += 3)  // goes from 0 degrees to 180 degrees 
                {                                  // in steps of 1 degree 
                  microservo.write(pos);              // tell servo to go to position in variable 'pos' 
                  delay(15);                       // waits 15ms for the servo to reach the position 
                } 
           }
           if (readString.indexOf("?button2off") >0){
                for(pos = 180; pos>=1; pos-=3)     // goes from 180 degrees to 0 degrees 
                {                                
                  microservo.write(pos);              // tell servo to go to position in variable 'pos' 
                  delay(15);                       // waits 15ms for the servo to reach the position 
                } 
           }
            //clearing string for next read
            readString="";  

         }
       }
    }
}
}

我正在使用Arduino uno板，Arduino以太网屏蔽和dcs-930L Ip摄像头以及伺服电机的安全系统，我有地址直接从网络浏览器直接访问视频和照片，我使用以太网屏蔽设置一个网站，以便我可以控制它实际工作的伺服，所以我想要做的是设置一个按钮，这样当点击它给我一个视频/图像从我的IP相机，它可以在同一个Arduino网站或打开另一个窗口浏览器！我感谢任何帮助！谢谢

Answer 1

如果您想在网站上添加一个按钮，打开一个显示IP摄像头供稿的新窗口，您可以使用此HTML，只需将PutUrlHere替换为相机Feed的网址：

<a href="PutUrlHere" target="_blank">
    <input type="button" value="Show Camera">
</a>

编辑：

对于您的程序，您应该可以在任何希望按钮显示的地方执行此操作：

client.println("<a href='PutUrlHere' target='_blank'><input type='button' value='Show Camera'></a>");

连接Arduino和Ip相机

1 个答案: