Question

我有XMVector3AngleBetweenVectors函数的奇怪结果。请考虑以下代码：

float angle = XMConvertToDegrees(XMVectorGetX(
        XMVector3AngleBetweenVectors(GMathFV(XMFLOAT3(0.0f, 100.0f, 0.0f)), 
        GMathFV(XMFLOAT3(0.0f, 200.0f, 0.0f)))));

它正在寻找两个3D矢量之间的角度，由XMFLOAT3结构描述。 GMathFV是用户定义的函数，它将XMFLOAT3转换为XMVECTOR，如下所示：

inline XMVECTOR GMathFV(XMFLOAT3& val)
{
    return XMLoadFloat3(&val);    
}

其他一切都是directxmath.h库。这里一切都很好，结果角度是0.00000就像预期的那样。

但对于具有负y轴值的其他矢量，例如：

float angle = XMConvertToDegrees(XMVectorGetX(
        XMVector3AngleBetweenVectors(GMathFV(XMFLOAT3(0.0f, -100.0f, 0.0f)), 
        GMathFV(XMFLOAT3(0.0f, -99.0f, 0.0f)))));

结果是0.0197823402，我很难称之为零角度。

请有人帮我解决问题。它是负数精度，太近的矢量坐标还是其他东西？

UPD：很棒，但a(0.0f, 100.0f, 0.0f) x b(0.0f, 99.0f, 0.0f)给出0.0197823402，a(0.0f, 101.0f, 0.0f) x b(0.0f, 100.0f, 0.0f)给出0.000000

Answer 1

DirectXMath专为32位浮点数学而设计。您看到floating point error升级了。这是XMVector3AngleBetweenVectors的定义。

inline XMVECTOR XM_CALLCONV XMVector3AngleBetweenVectors(FXMVECTOR V1, FXMVECTOR V2)
{
    XMVECTOR L1 = XMVector3ReciprocalLength(V1);
    XMVECTOR L2 = XMVector3ReciprocalLength(V2);

    XMVECTOR Dot = XMVector3Dot(V1, V2);

    L1 = XMVectorMultiply(L1, L2);

    XMVECTOR CosAngle = XMVectorMultiply(Dot, L1);
    CosAngle = XMVectorClamp(CosAngle, g_XMNegativeOne.v, g_XMOne.v);

    return XMVectorACos(CosAngle);
}

在你的第一个例子中，CosAngle等于1.000000000

在你的第二个例子中，CosAngle等于0.999999940

XMVectorACos（0.999999940）= 0.000345266977

这个大误差来自ACos的多项式近似。通常，您应该尽可能避免使用三角反演。它们很慢而且很吵。这是定义，因此您可以了解其大小。

inline XMVECTOR XM_CALLCONV XMVectorACos (FXMVECTOR V)
{
    __m128 nonnegative = _mm_cmpge_ps(V, g_XMZero);
    __m128 mvalue = _mm_sub_ps(g_XMZero, V);
    __m128 x = _mm_max_ps(V, mvalue);  // |V|

    // Compute (1-|V|), clamp to zero to avoid sqrt of negative number.
    __m128 oneMValue = _mm_sub_ps(g_XMOne, x);
    __m128 clampOneMValue = _mm_max_ps(g_XMZero, oneMValue);
    __m128 root = _mm_sqrt_ps(clampOneMValue);  // sqrt(1-|V|)

    // Compute polynomial approximation
    const XMVECTOR AC1 = g_XMArcCoefficients1;
    XMVECTOR vConstants = XM_PERMUTE_PS( AC1, _MM_SHUFFLE(3, 3, 3, 3) );
    __m128 t0 = _mm_mul_ps(vConstants, x);

    vConstants = XM_PERMUTE_PS( AC1, _MM_SHUFFLE(2, 2, 2, 2) );
    t0 = _mm_add_ps(t0, vConstants);
    t0 = _mm_mul_ps(t0, x);

    vConstants = XM_PERMUTE_PS( AC1, _MM_SHUFFLE(1, 1, 1, 1) );
    t0 = _mm_add_ps(t0, vConstants);
    t0 = _mm_mul_ps(t0, x);

    vConstants = XM_PERMUTE_PS( AC1, _MM_SHUFFLE(0, 0, 0, 0) );
    t0 = _mm_add_ps(t0, vConstants);
    t0 = _mm_mul_ps(t0, x);

    const XMVECTOR AC0 = g_XMArcCoefficients0;
    vConstants = XM_PERMUTE_PS( AC0, _MM_SHUFFLE(3, 3, 3, 3) );
    t0 = _mm_add_ps(t0, vConstants);
    t0 = _mm_mul_ps(t0, x);

    vConstants = XM_PERMUTE_PS( AC0, _MM_SHUFFLE(2, 2, 2, 2) );
    t0 = _mm_add_ps(t0, vConstants);
    t0 = _mm_mul_ps(t0, x);

    vConstants = XM_PERMUTE_PS( AC0, _MM_SHUFFLE(1, 1, 1, 1) );
    t0 = _mm_add_ps(t0, vConstants);
    t0 = _mm_mul_ps(t0, x);

    vConstants = XM_PERMUTE_PS( AC0, _MM_SHUFFLE(0, 0, 0, 0) );
    t0 = _mm_add_ps(t0, vConstants);
    t0 = _mm_mul_ps(t0, root);

    __m128 t1 = _mm_sub_ps(g_XMPi, t0);
    t0 = _mm_and_ps(nonnegative, t0);
    t1 = _mm_andnot_ps(nonnegative, t1);
    t0 = _mm_or_ps(t0, t1);
    return t0;
}

DirectXMath向量操作精度

1 个答案: