Question

我尝试在图像中设置角度的ROI。起初，我认为使用掩码会给我与在IplImage结构中设置ROI相同的结果。然后，我会像使用ROI时那样使用cvResize，但这次是使用掩码。

然而，由于这个角度，这显然不是那么容易。

有没有办法将任何矩形的内部以任何角度复制到一个新的IplImage中，这个大小将是这个矩形的大小？

CvSeq* approximatedContour = cvApproxPoly(currentContour,
                                          sizeof(CvContour),
                                          0,
                                          CV_POLY_APPROX_DP,
                                          8);

// Circonscrire le polygone trouve dans un rectangle
etiquetteBox = cvMinAreaRect2(approximatedContour);

CvPoint2D32f boxPoints[4];
CvPoint2D32f* c1 = (&cvPoint2D32f(0,0),
                    &cvPoint2D32f(200,0),
                    &cvPoint2D32f(0,200),
                    &cvPoint2D32f(200,200));

CvMat* mmat = cvCreateMat(3,3,CV_32FC1);

cvBoxPoints(etiquetteBox, boxPoints);

IplImage* mask = cvCreateImage(cvSize(in->width,in->height), IPL_DEPTH_8U, 1);
IplImage* ROIimg = cvCreateImage(cvSize(in->width,in->height), IPL_DEPTH_8U, 1);
drawBox(mask,etiquetteBox,target_color[3]);

cvAnd(thresImg,mask,ROIimg,mask);
if(voirSeuillage)
    cvCvtColor(ROIimg,in,CV_GRAY2BGR); //ROIimg is OK here!

mmat = cvGetPerspectiveTransform(boxPoints,c1,mmat);
cvWarpPerspective(ROIimg,thresImgResized,mmat); // here I get a full black image!

这样做，正如Banthar所建议的那样，我得到一个完整的黑色图像，而不是ROIimg中boxPoints分隔的内容，这段代码出了什么问题？

申请回答后：

以下是我现在所做的事情：

double angle = 0.;
// TODO adaptive angle compensation
if(abs(etiquetteBox.angle) > 30)
    angle = etiquetteBox.angle + 270.;
else
    angle = etiquetteBox.angle - 270.;

CvPoint2D32f boxPoints[4];
CvPoint2D32f c1[] = {cvPoint2D32f(0,0),
                     cvPoint2D32f(20,0),
                     cvPoint2D32f(20,20),
                     cvPoint2D32f(0,20)};

CvMat* mmat = cvCreateMat(3,3,CV_32FC1);
cvBoxPoints(etiquetteBox, boxPoints);
Point center = Point(10,10);

//warp the image to fit the polygon into the 20x20 image
mmat = cvGetPerspectiveTransform(boxPoints,c1,mmat);
cvWarpPerspective(thresImg,thresImgResized,mmat);
//rotate the image because the inconsistent angle of etiquetteBox
// from a frame to the next ...
//it would be very cool to find a way to fix this...
CvMat rot_mat = getRotationMatrix2D( center, angle,1.0);
cvWarpAffine(thresImgResized,rotatedIm,&rot_mat);
It is still not quite what I want, because the object is rotating into the 20x20 rotatedImg; in thresImgResized, after cvWarpPerspective, the object is well segmented, BUT it is reversed because the inconsistency of the angle of etiquetteBox (-0 degrees in a frame, -90 in the next, depending on how I hold the object to be detected), which I get this way:

cvFindContours(dilImage,
               contoursStorage,
               &contours,
               sizeof(CvContour),
               CV_RETR_LIST,
               CV_CHAIN_APPROX_TC89_KCOS);

// Trouver des polygones
CvSeq* currentContour = contours;
while(currentContour != 0 && !etiquette)
{
    CvSeq* approximatedContour = cvApproxPoly(currentContour,
                                              sizeof(CvContour),
                                              0,
                                              CV_POLY_APPROX_DP,
                                              9);

    // Circonscrire le polygone trouve dans un rectangle
    etiquetteBox = cvMinAreaRect2(approximatedContour);

我不知道如何解决这个问题，但至少，它比设置我的IplImage ROI更好，因为我在连续帧中将etiquetteBox的角度开关从-0度补偿到-90度。

Answer 1

您在c1的定义中使用了错误的括号。试试这个：

    CvPoint2D32f c1[] = {
                        cvPoint2D32f(0,200),
                        cvPoint2D32f(0,0),
                        cvPoint2D32f(200,0),
                        cvPoint2D32f(200,200),
    };

OpenCV：掩码和ROI之间的差异

申请回答后：

1 个答案: