Question

我使用PlatformIO下载了最新版本的VS Code，我还从PlatformIO Library Manager下载了库Mouse.h，即使如此，在将代码上传到Micro Pro后，鼠标也无法响应操纵杆！但是当我通过Arduino IDE上传时，相同的代码也可以工作！

我将.platformio / lib中的Mouse.h与程序文件\ Arduino \ libraries中的Mouse.h进行了比较我将.platformio / lib中的Mouse.cpp与程序文件\ Arduino \ libraries中的Mouse.cpp进行了比较

它们具有完全相同的代码！

这是我的MICRO PRO 32u4 5v的代码：

/* HID Joystick Mouse Example
   by: Jim Lindblom
   date: 1/12/2012
   license: MIT License - Feel free to use this code for any purpose.
   No restrictions. Just keep this license if you go on to use this
   code in your future endeavors! Reuse and share.

   This is very simplistic code that allows you to turn the
   SparkFun Thumb Joystick (http://www.sparkfun.com/products/9032)
   into an HID Mouse. The select button on the joystick is set up
   as the mouse left click.
 */

#include <Arduino.h>
#include <Mouse.h>
int horzPin = A0;  // Analog output of horizontal joystick pin
int vertPin = A1;  // Analog output of vertical joystick pin
int selPin = 9;  // select button pin of joystick

int vertZero, horzZero;  // Stores the initial value of each axis, usually around 512
int vertValue, horzValue;  // Stores current analog output of each axis
const int sensitivity = 200;  // Higher sensitivity value = slower mouse, should be <= about 500
int mouseClickFlag = 0;

void setup()
{
  pinMode(horzPin, INPUT);  // Set both analog pins as inputs
  pinMode(vertPin, INPUT);
  pinMode(selPin, INPUT);  // set button select pin as input
  digitalWrite(selPin, HIGH);  // Pull button select pin high
  delay(1000);  // short delay to let outputs settle
  vertZero = analogRead(vertPin);  // get the initial values
  horzZero = analogRead(horzPin);  // Joystick should be in neutral position when reading these
}

void loop()
{
  vertValue = analogRead(vertPin) - vertZero;  // read vertical offset
  horzValue = analogRead(horzPin) - horzZero;  // read horizontal offset
//delay(3000);

  if (vertValue != 0)
    Mouse.move(0, vertValue/sensitivity, 0);  // move mouse on y axis
  if (horzValue != 0)
    Mouse.move((horzValue/sensitivity) *-1, 0, 0);  // move mouse on x axis

  if ((digitalRead(selPin) == 0) && (!mouseClickFlag))  // if the joystick button is pressed
  {
    mouseClickFlag = 1;
    Mouse.press(MOUSE_LEFT);  // click the left button down
  }
  else if ((digitalRead(selPin))&&(mouseClickFlag)) // if the joystick button is not pressed
  {
    mouseClickFlag = 0;
    Mouse.release(MOUSE_LEFT);  // release the left button
  }
}

Answer 1

您安装了lib之后是否重新启动了VS Code？

对我来说，它可以在某些情况下解决此类问题。

编辑：您是否通过按“ Ctrl + Shift + p”来“重建IntelliSense索引”？

VSCode中的PlatformIO

1 个答案: