Question

我有以下表格：

CREATE TABLE `data` (
  `date_time` decimal(26,6) NOT NULL,
  `channel_id` mediumint(8) unsigned NOT NULL,
  `value` varchar(40) DEFAULT NULL,
  `status` tinyint(3) unsigned DEFAULT NULL,
  `connected` tinyint(1) unsigned NOT NULL,
  PRIMARY KEY (`channel_id`,`date_time`)
) ENGINE=MyISAM DEFAULT CHARSET=latin1;

CREATE TABLE `channels` (
  `channel_id` mediumint(8) unsigned NOT NULL AUTO_INCREMENT,
  `channel_name` varchar(40) NOT NULL,
  PRIMARY KEY (`channel_id`),
  UNIQUE KEY `channel_name` (`channel_name`)
) ENGINE=MyISAM  DEFAULT CHARSET=latin1;

我想知道是否有人可以就如何优化或重写以下查询给出一些建议：

SELECT channel_name, t0.date_time, t0.value, t0.status, t0.connected, t1.date_time, t1.value, t1.status, t1.connected FROM channels,
    (SELECT MAX(date_time) AS date_time, channel_id, value, status, connected FROM data
        WHERE date_time <= 1300818330
        GROUP BY channel_id) AS t0
    RIGHT JOIN
    (SELECT MAX(date_time) AS date_time, channel_id, value, status, connected FROM data
        WHERE date_time <= 1300818334
        GROUP BY channel_id) AS t1
ON t0.channel_id = t1.channel_id
WHERE channels.channel_id = t1.channel_id

基本上我在两个不同的时间获取每个channel_name的值，状态和连接字段。由于t0总是＆lt; = t1，因此t1可以存在字段，但t0不存在，我想要显示它。这就是我使用RIGHT JOIN的原因。如果t1不存在，则t0不存在，因此不应返回任何行。

问题似乎是因为我加入子查询，所以不能使用索引？我尝试重写它以首先在数据表的channel_id上进行自联接，但这是数百万行。

当t0.value = t1.value＆amp;时，能够为每个最后一行添加一个布尔字段也是很好的。 t0.status = t1.status＆amp; t0.connected = t1.connected。

非常感谢你的时间。

Answer 1

您可以将两个子查询减少为一个

SELECT channel_id,
   MAX(date_time) AS t1_date_time,
   MAX(case when date_time <= {$p1} then date_time end) AS t0_date_time
FROM data
WHERE date_time <= {$p2}
GROUP BY channel_id

GROUP BY在MySQL中出了名的误导。想象一下，如果你在同一个select中有MIN（）和MAX（），那么非分组列应该来自哪一行？一旦你理解了这一点，你就会明白为什么它不具有确定性。

获取完整的t0和t1行

SELECT x.channel_id,
       t0.date_time, t0.value, t0.status, t0.connected,
       t1.date_time, t1.value, t1.status, t1.connected
FROM (
    SELECT channel_id,
       MAX(date_time) AS t1_date_time,
       MAX(case when date_time <= {$p1} then date_time end) AS t0_date_time
    FROM data
    WHERE date_time <= {$p2}
    GROUP BY channel_id
) x
INNER JOIN data t1 on t1.channel_id = x.channel_id and t1.date_time = x.t1_date_time
LEFT JOIN data t0 on t0.channel_id = x.channel_id and t0.date_time = x.t0_date_time

最后加入获取频道名称

SELECT c.channel_name,
       t0.date_time, t0.value, t0.status, t0.connected,
       t1.date_time, t1.value, t1.status, t1.connected,
       t0.value=t1.value AND t1.status=t0.status
                         AND t0.connected=t1.connected name_me
FROM (
    SELECT channel_id,
       MAX(date_time) AS t1_date_time,
       MAX(case when date_time <= {$p1} then date_time end) AS t0_date_time
    FROM data
    WHERE date_time <= {$p2}
    GROUP BY channel_id
) x
INNER JOIN channels c on c.channel_id = x.channel_id
INNER JOIN data t1 on t1.channel_id = x.channel_id and t1.date_time = x.t1_date_time
LEFT JOIN data t0 on t0.channel_id = x.channel_id and t0.date_time = x.t0_date_time

<小时/>

修改

要在通道名称上执行RLIKE，看起来很简单，可以在c.channel_name的查询末尾添加WHERE子句。但是，在子查询中过滤它可能会更好，利用从左到右处理逗号符号连接的MySQL功能。

SELECT x.channel_name,
       t0.date_time, t0.value, t0.status, t0.connected,
       t1.date_time, t1.value, t1.status, t1.connected,
       t0.value=t1.value AND t1.status=t0.status
                         AND t0.connected=t1.connected name_me
(
    SELECT c.channel_id, c.channel_name,
       MAX(d.date_time) AS t1_date_time,
       MAX(case when d.date_time <= {$p1} then d.date_time end) AS t0_date_time
    FROM channels c, data d
    WHERE c.channel_name RLIKE {$expr}
      AND c.channel_id = d.channel_id
      AND d.date_time <= {$p2}
    GROUP BY c.channel_id
) x
INNER JOIN data t1 on t1.channel_id = x.channel_id and t1.date_time = x.t1_date_time
LEFT JOIN data t0 on t0.channel_id = x.channel_id and t0.date_time = x.t0_date_time

mysql连接子查询

1 个答案:

修改