Question

鉴于我在上一个问题中采用的路线：

ARKit - place a SCNPlane between 2 vector points on a plane in Swift 3

......似乎有缺陷，我正在寻找其他选择。我可以在两个节点之间绘制一条线，然后我可以在那些节点之上创建节点，有效地在一个正方形中，但即使我在它们之间画线，我也不能将它变成一个形状。在Scenekit中是否可以绘制一个形状（正方形），其中每个角都连接到一个节点。

我可以创建一个平面，将它放在一个节点上，转换枢轴然后旋转，但它并不总是有效，但是SCNGeometry线可以。

由于

Answer 1

所以答案，至少我的解决方案是使用SCNGeometry三角形。我想要一个正方形（而不是立方体）作为增强现实中的墙，所以我只使用映射墙的4个角的4个节点构建了2个三角形。

构建三角形的类：

extension SCNGeometry {

    class func triangleFrom(vector1: SCNVector3, vector2: SCNVector3, vector3: SCNVector3) -> SCNGeometry {

        let indices: [Int32] = [0, 1, 2]

        let source = SCNGeometrySource(vertices: [vector1, vector2, vector3])

        let element = SCNGeometryElement(indices: indices, primitiveType: .triangles)

        return SCNGeometry(sources: [source], elements: [element])
    }
}

使用以下内容调用2个三角形的点为[p1，p2，p4]和[p1，p3，p4]：

let thirdPoint = firstPoint.clone()
thirdPoint.position = SCNVector3Make(thirdPoint.position.x, 
thirdPoint.position.y + Float(1.5), thirdPoint.position.z)
sceneView.scene.rootNode.addChildNode(thirdPoint)

let fourthPoint = secondPoint.clone()
fourthPoint.position = SCNVector3Make(fourthPoint.position.x, 
fourthPoint.position.y + Float(1.5), fourthPoint.position.z)
sceneView.scene.rootNode.addChildNode(fourthPoint)

let triangle = SCNGeometry.triangleFrom(vector1: firstPoint.position, vector2: secondPoint.position, vector3: fourthPoint.position)
let triangleNode = SCNNode(geometry: triangle)
triangleNode.geometry?.firstMaterial?.diffuse.contents = UIColor.blue
triangleNode.geometry?.firstMaterial?.isDoubleSided = true
sceneView.scene.rootNode.addChildNode(triangleNode)

let triangle2 = SCNGeometry.triangleFrom(vector1: firstPoint.position, vector2: thirdPoint.position, vector3: fourthPoint.position)
let triangle2Node = SCNNode(geometry: triangle2)
triangle2Node.geometry?.firstMaterial?.diffuse.contents = UIColor.blue
triangle2Node.geometry?.firstMaterial?.isDoubleSided = true
sceneView.scene.rootNode.addChildNode(triangle2Node)

这都是基于通过在ARKit中选择墙的底部2个点来创建2个初始节点。

希望对其他寻找类似答案的人有意义。

编辑：添加材料

这是一个稍微不同的扩展名和添加材料的代码，墙的最终结果保持不变：

extension SCNGeometry {

    class func Quad() -> SCNGeometry {

        let verticesPosition = [
            SCNVector3(x: -0.242548823, y: -0.188490361, z: -0.0887458622),
            SCNVector3(x: -0.129298389, y: -0.188490361, z: -0.0820985138),
            SCNVector3(x: -0.129298389, y: 0.2, z: -0.0820985138),
            SCNVector3(x: -0.242548823, y: 0.2, z: -0.0887458622)
        ]

        let textureCord = [
            CGPoint(x: 1, y: 1),
            CGPoint(x: 0, y: 1),
            CGPoint(x: 0, y: 0),
            CGPoint(x: 1, y: 0),
        ]

        let indices: [CInt] = [
            0, 2, 3,
            0, 1, 2
        ]

        let vertexSource = SCNGeometrySource(vertices: verticesPosition)
        let srcTex = SCNGeometrySource(textureCoordinates: textureCord)
        let date = NSData(bytes: indices, length: MemoryLayout<CInt>.size * indices.count)

        let scngeometry = SCNGeometryElement(data: date as Data, 
primitiveType: SCNGeometryPrimitiveType.triangles, primitiveCount: 2, 
bytesPerIndex: MemoryLayout<CInt>.size)

        let geometry = SCNGeometry(sources: [vertexSource,srcTex], 
elements: [scngeometry])

        return geometry


    }

}

然后只需在viewDidLoad（）中调用它并应用材质

let scene = SCNScene()

let quad = SCNGeometry.Quad()

let (min, max) = quad.boundingBox

let width = CGFloat(max.x - min.x)
let height = CGFloat(max.y - min.y)

quad.firstMaterial?.diffuse.contents = UIImage(named: "wallpaper.jpg")
quad.firstMaterial?.diffuse.contentsTransform = SCNMatrix4MakeScale(Float(width), Float(height), 1)
quad.firstMaterial?.diffuse.wrapS = SCNWrapMode.repeat
quad.firstMaterial?.diffuse.wrapT = SCNWrapMode.repeat

let node = SCNNode()
node.geometry = quad
scene.rootNode.addChildNode(node)

sceneView.scene = scene

Scenekit形状介于4点之间

1 个答案: