我正在尝试esp8266 esp-01，并在Arduino IDE方面做了所有问题，但是我在编译和构建blink示例时遇到了问题
使用：3.3v配置中的FT232RL usb-ttl，两个1.6v（新）电池为esp供电，以及所示的所有连接here（不使用led）。
当我点击（go）它编译时，但是当它传输时，两个板同步闪烁，我收到以下错误：
O sketch usa 219.479 bytes (50%) de espaço de armazenamento para programas. O máximo são 434.160 bytes.
Variáveis globais usam 31.172 bytes (38%) de memória dinâmica, deixando 50.748 bytes para variáveis locais. O máximo são 81.920 bytes.
error: failed reading byte
warning: espcomm_send_command: cant receive slip payload data
error: failed reading byte
warning: espcomm_send_command: cant receive slip payload data
error: failed reading byte
warning: espcomm_send_command: cant receive slip payload data
error: failed reading byte
warning: espcomm_send_command: cant receive slip payload data
error: failed reading byte
warning: espcomm_send_command: cant receive slip payload data
error: failed reading byte
warning: espcomm_send_command: cant receive slip payload data
error: failed reading byte
warning: espcomm_send_command: cant receive slip payload data
error: failed reading byte
warning: espcomm_send_command: cant receive slip payload data
error: failed reading byte
warning: espcomm_send_command: cant receive slip payload data
warning: espcomm_sync failed
error: espcomm_open failed
error: espcomm_upload_mem failed
我认为它是一个新手，它试图建立一个链接并失败。它可能是什么？
配置是默认的，程序员是＆＃34; AVRISP MKII＆＃34;