Question

当我去localhost：3000时，它可以工作，但是一旦我把它推到了heroku它就不起作用了。我究竟做错了什么？我正在使用邮箱宝石。

我在将它推送到heroku之前运行bundle exec rake assets:precompile。任何建议将不胜感激。

视图/布局/ _header.html.erb

<script>

$('#flash_wrapper').hide();
    $('#flash_wrapper').fadeIn("slow",function(){
    });
</script>

<script>
            $(document).ready(function() {
                setTimeout(function(){
                    $('#flash_wrapper').fadeOut("slow", function() {
                        $(this).remove();
                          })
                    }, 4500);
                });


</script>

的application.js

//= require_self
//= require jquery
//= require jquery_ujs
//= require turbolinks
//= require_tree .
//= require bootstrap-sprockets

...的Gemfile

source 'https://rubygems.org'

gem 'rails', '4.2.0'

gem 'mailboxer', '~> 0.12.5'
gem 'sass-rails', '~> 5.0'
gem 'uglifier', '>= 1.3.0'
gem 'coffee-rails', '~> 4.1.0'
gem 'jquery-rails'
gem 'turbolinks'
gem 'jbuilder', '~> 2.0'
gem 'sdoc', '~> 0.4.0', group: :doc
gem 'cancan', '~> 1.6.10'
gem 'stripe', '~> 1.21.0'
gem 'friendly_id', '~> 5.1.0'
gem 'formtastic', '~> 3.1.3'
gem 'aasm', '~> 4.1.0'
    group :development do
      gem 'byebug'
      gem 'web-console', '~> 2.0'
      gem 'spring'
      gem 'sqlite3'
    end


gem 'haml', '~> 4.0.6'
gem 'simple_form', '~> 3.1.0'
gem 'devise', '~> 3.4.1'
gem 'paperclip', '~> 4.2.1'
gem 'acts_as_votable', '~> 0.10.0'
gem 'bootstrap-sass', '~> 3.3.4.1' 
gem 'will_paginate', '~> 3.0.7'
gem 'will_paginate-bootstrap', '~> 1.0.1'
gem 'simple_form-bootstrap', '~> 1.0.1'

gem 'dotenv-rails', group: :development
gem 'aws-sdk', '< 2.0'

    group :production, :staging do
        gem 'pg', '~> 0.18.1'
        gem 'rails_12factor', '~> 0.0.3'
    end

Production.rb

Rails.application.configure do
  # Settings specified here will take precedence over those in config/application.rb.

  # Code is not reloaded between requests.
  config.cache_classes = true

  # Eager load code on boot. This eager loads most of Rails and
  # your application in memory, allowing both threaded web servers
  # and those relying on copy on write to perform better.
  # Rake tasks automatically ignore this option for performance.
  config.eager_load = true

  # Full error reports are disabled and caching is turned on.
  config.consider_all_requests_local       = false
  config.action_controller.perform_caching = true

  # Enable Rack::Cache to put a simple HTTP cache in front of your application
  # Add `rack-cache` to your Gemfile before enabling this.
  # For large-scale production use, consider using a caching reverse proxy like
  # NGINX, varnish or squid.
  # config.action_dispatch.rack_cache = true

  # Disable serving static files from the `/public` folder by default since
  # Apache or NGINX already handles this.
  config.serve_static_files = ENV['RAILS_SERVE_STATIC_FILES'].present?
  config.serve_static_assets = true

  # Compress JavaScripts and CSS.
  config.assets.js_compressor = :uglifier
  # config.assets.css_compressor = :sass

  # Do not fallback to assets pipeline if a precompiled asset is missed.
    config.assets.compile = true

  # Asset digests allow you to set far-future HTTP expiration dates on all assets,
  # yet still be able to expire them through the digest params.
  config.assets.digest = true

  # `config.assets.precompile` and `config.assets.version` have moved to config/initializers/assets.rb

  # Specifies the header that your server uses for sending files.
  # config.action_dispatch.x_sendfile_header = 'X-Sendfile' # for Apache
  # config.action_dispatch.x_sendfile_header = 'X-Accel-Redirect' # for NGINX

  # Force all access to the app over SSL, use Strict-Transport-Security, and use secure cookies.
  # config.force_ssl = true

  # Use the lowest log level to ensure availability of diagnostic information
  # when problems arise.
  config.log_level = :debug

  # Prepend all log lines with the following tags.
  # config.log_tags = [ :subdomain, :uuid ]

  # Use a different logger for distributed setups.
  # config.logger = ActiveSupport::TaggedLogging.new(SyslogLogger.new)

  # Use a different cache store in production.
  # config.cache_store = :mem_cache_store

  # Enable serving of images, stylesheets, and JavaScripts from an asset server.
  # config.action_controller.asset_host = 'http://assets.example.com'

  # Ignore bad email addresses and do not raise email delivery errors.
  # Set this to true and configure the email server for immediate delivery to raise delivery errors.
  # config.action_mailer.raise_delivery_errors = false

  # Enable locale fallbacks for I18n (makes lookups for any locale fall back to
  # the I18n.default_locale when a translation cannot be found).
  config.i18n.fallbacks = true

  # Send deprecation notices to registered listeners.
  config.active_support.deprecation = :notify

  # Use default logging formatter so that PID and timestamp are not suppressed.
  config.log_formatter = ::Logger::Formatter.new

  # Do not dump schema after migrations.
  config.active_record.dump_schema_after_migration = false

    config.paperclip_defaults = {
    :storage => :s3,
    :s3_protocol => 'http',
    :bucket => ENV['AWS_BUCKET'],
    :s3_credentials => {
      :access_key_id => ENV['AWS_ACCESS_KEY_ID'],
      :secret_access_key => ENV['AWS_SECRET_ACCESS_KEY']
    }
  }
end

Development.rb

Rails.application.configure do
  # Settings specified here will take precedence over those in config/application.rb.

  # In the development environment your application's code is reloaded on
  # every request. This slows down response time but is perfect for development
  # since you don't have to restart the web server when you make code changes.
  config.cache_classes = false

  # Do not eager load code on boot.
  config.eager_load = false

  # Show full error reports and disable caching.
  config.consider_all_requests_local       = true
  config.action_controller.perform_caching = false

  # Don't care if the mailer can't send.
  config.action_mailer.raise_delivery_errors = false

  # Print deprecation notices to the Rails logger.
  config.active_support.deprecation = :log

  # Raise an error on page load if there are pending migrations.
  config.active_record.migration_error = :page_load

  # Debug mode disables concatenation and preprocessing of assets.
  # This option may cause significant delays in view rendering with a large
  # number of complex assets.
  config.assets.debug = true

  # Asset digests allow you to set far-future HTTP expiration dates on all assets,
  # yet still be able to expire them through the digest params.
  config.assets.digest = true

  # Adds additional error checking when serving assets at runtime.
  # Checks for improperly declared sprockets dependencies.
  # Raises helpful error messages.
  config.assets.raise_runtime_errors = true
  config.action_mailer.default_url_options = { host: 'localhost', port: 3000 }

  # Raises error for missing translations
  # config.action_view.raise_on_missing_translations = true

    config.paperclip_defaults = {
    :storage => :s3,
    :s3_protocol => 'http',
    :bucket => ENV['AWS_BUCKET'],
    :s3_credentials => {
      :access_key_id => ENV['AWS_ACCESS_KEY_ID'],
      :secret_access_key => ENV['AWS_SECRET_ACCESS_KEY']
    }
        }
end

Answer 1

当你运行rake资产：precompile时，你是否记得将这些结果签入git。如果你没有，那么他们就不会被推到heroku，因此无法被消费。

您建议的修复可能不是您想要的长期，因为它会给您的服务器带来更大的压力，并使它们像在开发中那样行事，每次请求都会对资产进行评估＆＃39;动态。

为您的部署过程，在本地编译并检查它们以进行部署，或者没有编译任何资产并让heroku为您编译它们。

干杯

Ĵ

Answer 2

我通过将config.assets.debug = true添加到production.rb

来修复它

Rails：jQuery在localhost中工作，但在heroku上没有生产

2 个答案: