Question

我试图进行自己的I2C通信，而且我遇到了多个驱动程序的问题，但是我不理解它们，我只是没有看到它们（i＆i ＃39; m仍然在vhdl新鲜，所以请看看我的代码并告诉mi为什么会出现这样的错误。

我尝试在旗帜上操作以在公交车上安装多个信号驱动器，但那里有些不对劲。多个驱动程序位于scl，sda，start_clk和stop_clk上。是因为这些标志例如在两个不同的过程中吗？

        library ieee;
    use ieee.std_logic_1164.all;
    use ieee.numeric_std.all;

    entity I2C_com is


    port (

    reset_en: in std_logic;  
    clk: in std_logic;  
    sda: inout std_logic;   
    scl: out std_logic;    
    RD:in std_logic;       
    WR: in std_logic;       
    addr: buffer std_logic_vector(7 downto 0) 


    );

    end I2C_com;



    architecture MAIN of I2C_com  is

    signal data :std_logic_vector (12 downto 0):="0000000000010"; 
    signal i2c_clk: std_logic ;  
    signal clk_count : unsigned(19 downto 0):="00000000000000000100"; 
    type program_state is (start,init,error_rd_wr,slave,ack);
    signal state: program_state;
    signal write_data: std_logic_vector (7 downto 0):=(others => '0'); 
   signal read_data: std_logic_vector (7 downto 0):=(others => '0'); 
    signal clk_enable: std_logic; 
    signal reset: std_logic:='1'; 
    signal start_clk: std_logic:= 'Z'; 
    signal stop_clk: std_logic:= 'Z';   
    signal strech: std_logic := '0';
    signal cnt_addr: integer := 0; 
    signal ack_error: std_logic; 
    signal sda_data: std_logic; 
    signal start_data: std_logic:= 'Z'; 

    begin



    i2c_clock: process(clk,reset_en,reset)

    begin



    if reset_en = '1' or reset = '1' then 



    elsif falling_edge(clk) then

    if clk_count < unsigned(data) then  
    clk_count <= clk_count + 1;
    clk_enable <= '1';
    else
    clk_count <= x"00000";
    clk_enable <= '0';
    end if;
    i2c_clk <= clk_enable;

    if start_clk = '1'  then

    sda <= '0';
    scl <= '0';
    start_clk <= '0';

    end if;

    if stop_clk = '1'  then

    sda <= '0';
    scl <= '0';
    stop_clk <= '0';

    end if;

    end if; 
    end process i2c_clock;

    --
    process(i2c_clk,reset_en,reset)



    begin


    if reset_en = '1' or reset = '1' then

    reset <= '0';       
    cnt_addr <= 0;
    state <= init;  


    elsif rising_edge(i2c_clk) then


    case state is


    when init =>                                    
    if RD = '1' or WR = '1' then      
    state <= start;
    else
    state <= error_rd_wr;
    end if;

    when start =>                   

    start_clk <= '1';
    state <= slave;


    when slave =>                               

    start_data <= '1';

    if cnt_addr < 8 then

    sda_data <= addr(cnt_addr);

    cnt_addr <= cnt_addr + 1;

    else

    cnt_addr <= 0;
    state <= ack;

    end if;

    when error_rd_wr =>             

    reset <= '1';

    when ack =>

    start_data <= '0';
    ack_error <= sda;

    if ack_error = '1' then         

    stop_clk <= '1';
    reset <= '1';

    else
    end if;

    if RD = '1' then                    



    elsif WR = '1' then             



    else                                    

    stop_clk <= '1';
    reset <= '1';

    end if;

    end case;

    end if;
    end process;



    sda <= sda_data when start_data = '1' else 'Z';

    scl <= i2c_clk when start_clk = '0' and stop_clk = '0' else 'Z';







    end MAIN;

Answer 1

合成信号可以仅从一个过程或一个连续分配驱动;对于模拟，可以使用std_logic等解析信号来实现多个驱动程序。

scl和sda来自i2c_clock进程和文件末尾的连续分配。

start_clk和stop_clk来自i2c_clock进程和其他未命名进程。

scl和sda的一种可能性是仅从连续分配中驱动它们，因为综合工具通常更喜欢将三态输出写成：

q <= value when en = '1' else 'Z';

错误（10028）：无法解决网络＆＃34; sda＆＃34;的多个常量驱动程序在I2C_com.vhd（185）

1 个答案: