Question

我有一个嵌入式系统，想直接使用/dev/fb0。作为第一个测试，我使用了一些基于示例代码的代码everywhere in the net and SO。开幕成功，也是fstat和类似的。但mmap因EINVAL而失败。

来源：

#include <stdlib.h>
#include <unistd.h>
#include <stdio.h>
#include <fcntl.h>
#include <linux/fb.h>
#include <sys/mman.h>
#include <sys/ioctl.h>

int main() {
    int fbfd = 0;

    struct fb_var_screeninfo vinfo;
    struct fb_fix_screeninfo finfo;
    long int screensize = 0;
    char *fbp = 0;
    int x = 0, y = 0;
    long int location = 0;

    // Open the file for reading and writing
    fbfd = open("/dev/fb0", O_RDWR);
    if (fbfd == -1) {
        perror("Error: cannot open framebuffer device");
        exit(1);
    }
    printf("The framebuffer device was opened successfully.\n");

    struct stat stat;
    fstat(fbfd, &stat);
    printf("/dev/mem -> size: %u blksize: %u blkcnt: %u\n", 
            stat.st_size, stat.st_blksize, stat.st_blocks);

    // Get fixed screen information
    if (ioctl(fbfd, FBIOGET_FSCREENINFO, &finfo) == -1) {
        perror("Error reading fixed information");
        exit(2);
    }

    // Get variable screen information
    if (ioctl(fbfd, FBIOGET_VSCREENINFO, &vinfo) == -1) {
        perror("Error reading variable information");
        exit(3);
    }

    printf("%dx%d, %dbpp\n", vinfo.xres, vinfo.yres, vinfo.bits_per_pixel);

    // Figure out the size of the screen in bytes
    screensize = vinfo.xres * vinfo.yres * vinfo.bits_per_pixel / 8;
    const int PADDING = 4096;
    int mmapsize = (screensize + PADDING - 1) & ~(PADDING-1);

    // Map the device to memory
    fbp = (char *)mmap(0, mmapsize, PROT_READ | PROT_WRITE, MAP_SHARED, fbfd, 0);
    if ((int)fbp == -1) {
        perror("Error: failed to map framebuffer device to memory");
        exit(4);
    }
    printf("The framebuffer device was mapped to memory successfully.\n");

    munmap(fbp, screensize);
    close(fbfd);

    return 0;
}

输出：

The framebuffer device was opened successfully.
/dev/mem -> size: 0 blksize: 4096 blkcnt: 0
640x480, 4bpp
Error: failed to map framebuffer device to memory: Invalid argument

strace的：

...
open("/dev/fb0", O_RDWR)                = 3
write(1, "The framebuffer device was opene"..., 48The framebuffer device was opened successfully.
) = 48
fstat64(3, {st_mode=S_IFCHR|0640, st_rdev=makedev(29, 0), ...}) = 0
write(1, "/dev/mem -> size: 0 blksize: 409"..., 44/dev/mem -> size: 0 blksize: 4096 blkcnt: 0
) = 44
ioctl(3, FBIOGET_FSCREENINFO or FBIOPUT_CONTRAST, 0xbfca6564) = 0
ioctl(3, FBIOGET_VSCREENINFO, 0xbfca6600) = 0
write(1, "640x480, 4bpp\n", 14640x480, 4bpp
)         = 14
old_mmap(NULL, 155648, PROT_READ|PROT_WRITE, MAP_SHARED, 3, 0) = -1 EINVAL (Invalid argument)
write(2, "Error: failed to map framebuffer"..., 49Error: failed to map framebuffer device to memory) = 49
write(2, ": ", 2: )                       = 2
write(2, "Invalid argument", 16Invalid argument)        = 16
write(2, "\n", 1
)                       = 1

可以看到带控制台和礼服的启动画面。而cat /dev/urandom > /dev/fb0会在屏幕上充满噪音。 pagesize在系统上是4096（`getconf PAGESIZE）。因此，155648（0x26000）是一个倍数。偏移量和指针均为零。映射和文件模式都是RW ..我缺少什么？

这适用于使用uClibc和busybox运行单个应用程序的嵌入式设备构建，我必须从古老的内核中移植它。有代码用于拉伸等等，不需要多处理/窗口..请不要提示directfb;）。

Answer 1

显示framebuffer的内核驱动程序不支持mmap()设备的旧版直接framebuffer;您需要使用较新的DRM和KMS界面。

mmap / dev / fb0失败并显示“Invalid argument”

1 个答案: