Question

由于某些原因，即使我的偏移量是页面对齐的，我的mmap也会失败并显示Invalid argument消息。页面大小为4096字节。另外CONFIG_STRICT_DEVMEM被禁用，即我可以访问1MB以上的内存。

这是我的代码：

void *mmap64;
off_t offset = 0x000000d9fcc000;
int memFd = open("/dev/mem", O_RDWR);
if (-1 == memFd)
  perror("Error ");

mmap64 = mmap(0, getpagesize(), PROT_WRITE | PROT_READ, MAP_SHARED, memFd, offset);
if (MAP_FAILED == mmap64) {
  perror("Error ");
  return -1;
}

有人可以解释为什么会这样吗？

修改

以下是我的代码的strace

execve("./to_phys_test", ["./to_phys_test", "-r"], [/* 18 vars */]) = 0
brk(0)                                  = 0x2012000
access("/etc/ld.so.nohwcap", F_OK)      = -1 ENOENT (No such file or directory)
mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fe240a2c000
access("/etc/ld.so.preload", R_OK)      = -1 ENOENT (No such file or directory)
open("/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=162063, ...}) = 0
mmap(NULL, 162063, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7fe240a04000
close(3)                                = 0
access("/etc/ld.so.nohwcap", F_OK)      = -1 ENOENT (No such file or directory)
open("/lib/x86_64-linux-gnu/libc.so.6", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0P \2\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=1840928, ...}) = 0
mmap(NULL, 3949248, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fe240447000
mprotect(0x7fe240601000, 2097152, PROT_NONE) = 0
mmap(0x7fe240801000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1ba000) = 0x7fe240801000
mmap(0x7fe240807000, 17088, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7fe240807000
close(3)                                = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fe240a03000
mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fe240a01000
arch_prctl(ARCH_SET_FS, 0x7fe240a01740) = 0
mprotect(0x7fe240801000, 16384, PROT_READ) = 0
mprotect(0x601000, 4096, PROT_READ)     = 0
mprotect(0x7fe240a2e000, 4096, PROT_READ) = 0
munmap(0x7fe240a04000, 162063)          = 0
open("/dev/mem", O_RDWR)                = 3
open("/dev/my_kmodule", O_RDWR)    = 4
ioctl(4, 0x40086e00, 0x7ffc72b334b0)    = 0
fstat(1, {st_mode=S_IFCHR|0620, st_rdev=makedev(136, 0), ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fe240a2b000
write(1, "sa.size = 44\n", 13)          = 13
write(1, "sa.addr_uint64_t = d9047000\n", 28) = 28
write(1, "sa.addr_void_ptr = 0xd9047000\n", 30) = 30
write(1, "PAGE_SIZE = 4096\n", 17)      = 17
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_SHARED, 3, 0xd9047000) = -1 EINVAL (Invalid argument)
dup(2)                                  = 5
fcntl(5, F_GETFL)                       = 0x8002 (flags O_RDWR|O_LARGEFILE)
brk(0)                                  = 0x2012000
brk(0x2033000)                          = 0x2033000
fstat(5, {st_mode=S_IFCHR|0620, st_rdev=makedev(136, 0), ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fe240a2a000
lseek(5, 0, SEEK_CUR)                   = -1 ESPIPE (Illegal seek)
write(5, "Error : Invalid argument\n", 25) = 25
close(5)                                = 0
munmap(0x7fe240a2a000, 4096)            = 0
exit_group(-1)                          = ?
+++ exited with 255 +++

Answer 1

nopat内核命令行参数

只需添加即可，如下所述：https://stackoverflow.com/a/36634422/895245

这是我的测试设置：

kernel module：

#include <asm/io.h> /* virt_to_phys */
#include <linux/debugfs.h>
#include <linux/delay.h> /* usleep_range */
#include <linux/kernel.h>
#include <linux/kthread.h>
#include <linux/module.h>
#include <linux/seq_file.h> /* single_open, single_release */
#include <linux/slab.h> /* kmalloc, kfree */

static volatile u32 *i;

static struct dentry *debugfs_file;

static int show(struct seq_file *m, void *v)
{
    seq_printf(m,
        "*i 0x%llx\n"
        "i %p\n"
        "virt_to_phys 0x%llx\n",
        (unsigned long long)*i,
        i,
        (unsigned long long)virt_to_phys((void *)i)
    );
    return 0;
}

static int open(struct inode *inode, struct  file *file)
{
    return single_open(file, show, NULL);
}

static const struct file_operations fops = {
    .llseek = seq_lseek,
    .open = open,
    .owner = THIS_MODULE,
    .read = seq_read,
    .release = single_release,
};

static int myinit(void)
{
    i = kmalloc(sizeof(i), GFP_KERNEL);
    *i = 0x12345678;
    debugfs_file = debugfs_create_file(
        "lkmc_virt_to_phys", S_IRUSR, NULL, NULL, &fops);
    return 0;
}

static void myexit(void)
{
    debugfs_remove(debugfs_file);
    kfree((void *)i);
}

module_init(myinit)
module_exit(myexit)
MODULE_LICENSE("GPL");

/dev/mem userland：

#!/bin/sh
set -ex
insmod /virt_to_phys.ko
cd /sys/kernel/debug
cat lkmc_virt_to_phys
# *i = 0x12345678
addr=$(grep virt_to_phys lkmc_virt_to_phys | cut -d ' ' -f 2)
devmem2 "$addr"
devmem2 "$addr" w 0x9ABCDEF0
cat lkmc_virt_to_phys
# *i = 0x9ABCDEF0
rmmod virt_to_phys

nopat传递给：https://github.com/cirosantilli/linux-kernel-module-cheat/blob/2eca9280e12dbab79ccb67d0640b2a0edc2c9ffc/runqemu#L65

还可以在QEMU监视器上尝试xp。

并且devmem2已被Buildroot本身升级：http://free-electrons.com/pub/mirror/devmem2.c另请参阅：Accessing physical address from user space

/ dev / mem的mmap失败，virt_to_phys地址的参数无效，但地址是页面对齐的

1 个答案: