opengl微小的渲染故障，需要帮助＆amp;提示

时间：2013-05-17 15:46:51

标签： c++ opengl freeglut

这是我的代码：

#include <stdlib.h>
#include <iostream>
#include <gl/glew.h>
#include <gl/freeglut.h>
#include <gl/GL.h>
#include <gl/GLU.h>
#include <SDL.h>

using namespace std;

typedef unsigned short us;
typedef unsigned char uc;

bool *keystates = new bool[256];
bool *skeystates= new bool[256];
uc dir_m[8][2]={
    { 0, 1 },
    { 0,-1 },
    { -1,0 },
    { 1,0 },
    { 1,1},
    { 1,-1 },
    { -1,-1 },
    { -1,1 }
};

us totalbots=15;

float zoomlvl=-70.f;
float camx=0.f,camy=0.f;

struct bot_data{
    float x,y,z;
    float r,g,b;
    float size; //    "radius" of the square
    us coold;
    us age;
    us trans:5;
    us dir:3,fac:2;
    bot_data(void);
    void move(void);
    void deliver(us bot);
};
struct bool_data{
    bool ch:1,ch2:1;
};

bot_data::bot_data(void){
    size=0.25f;
    fac=rand()%4;
    switch(fac){
    case 0:x=10.f,y=10.f,z=0.f;
        r=1.0f,g=0.f,b=0.f;
        break;
    case 1:x=-10.f,y=-10.f,z=0.f;
        r=0.0f,g=0.f,b=1.f;
        break;
    case 2:x=-10.f,y=10.f,z=0.f;
        r=1.0f,g=1.f,b=0.f;
        break;
    case 3:x=10.f,y=-10.f,z=0.f;
        r=0.0f,g=1.f,b=0.f;
        break;
    }
    coold=0;
    trans=0;
    age=0;
    dir=rand()%8;
}

bot_data *cubers=new bot_data[65536];
bool_data *bools=new bool_data;

void bot_data::move(void){
    float move=size/10.f;
    switch(dir){
    case 0:y+=move;
        break;
    case 1:y-=move;
        break;
    case 2:x-=move;
        break;
    case 3:x+=move;
        break;
    case 4:x+=move;
        y+=move;
        break;
    case 5:x+=move;
        y-=move;
        break;
    case 6:y-=move;
        x-=move;
        break;
    case 7:y+=move;
        x-=move;
        break;
    }
}
void bot_data::deliver(us bot){
    age=-10;
    totalbots+=3;
    float tmp=size-(size/4.f);
    size=0.25f;
    x-=size;
    y+=size;
    for(uc i=1;i<=3;i++){
        cubers[totalbots-i].fac=fac;
        switch(fac){
        case 0:cubers[totalbots-i].r=1.0f,cubers[totalbots-i].g=0.f,cubers[totalbots-i].b=0.f;
            break;
        case 1:cubers[totalbots-i].r=0.0f,cubers[totalbots-i].g=0.f,cubers[totalbots-i].b=1.f;
            break;
        case 2:cubers[totalbots-i].r=1.0f,cubers[totalbots-i].g=1.f,cubers[totalbots-i].b=0.f;
            break;
        case 3:cubers[totalbots-i].r=0.0f,cubers[totalbots-i].g=1.f,cubers[totalbots-i].b=0.f;
            break;
        }
        cubers[totalbots-i].coold=coold;
        cubers[totalbots-i].size=size;
        switch(i){
        case 1:cubers[totalbots-i].x=x;
            cubers[totalbots-i].y=y-size*2;
            break;
        case 2:cubers[totalbots-i].x=x+size*2;
            cubers[totalbots-i].y=y;
            break;
        case 3:cubers[totalbots-i].x=x+size*2;
            cubers[totalbots-i].y=y-size*2;
            break;
        }
    }
}

void initkeys(void){
    for(uc i=0;i<255;i++){
        keystates[i]=false;
        skeystates[i]=false;
    }
}
void p_keys(unsigned char key, int x, int y){
    keystates[key]=true;
}
void keyup(unsigned char key, int x, int y){
    keystates[key]=false;
}
void sp_keys(int key, int x, int y){
    skeystates[key]=true;
}
void skeyup(int key, int x, int y){
    skeystates[key]=false;
}
void key_func(void){
    if (keystates['z']){
        if(skeystates[GLUT_KEY_UP])zoomlvl+=1.f;
        else if (skeystates[GLUT_KEY_DOWN])zoomlvl-=1.f;
        if(zoomlvl<-100.0f)zoomlvl=-100.f;
        else if(zoomlvl>-5.f)zoomlvl=-5.f;
    }
    else{
        if(skeystates[GLUT_KEY_UP])camy-=1.f;
        else if(skeystates[GLUT_KEY_DOWN])camy+=1.f;
    }
    if(skeystates[GLUT_KEY_LEFT])camx+=1.f;
    else if(skeystates[GLUT_KEY_RIGHT])camx-=1.f;
}
void render_p(us bot){
    glColor3f(cubers[bot].r,cubers[bot].g,cubers[bot].b);
    glBegin(GL_QUADS);
    glVertex2f(cubers[bot].size,cubers[bot].size);
    glVertex2f(cubers[bot].size,-cubers[bot].size);
    glVertex2f(-cubers[bot].size,-cubers[bot].size);
    glVertex2f(-cubers[bot].size,cubers[bot].size);
    glEnd();
}
void process_cubers(void){
    for(us i=0;i<totalbots;i++){
        //glPushMatrix();
        glLoadIdentity();
        glTranslatef(cubers[i].x,cubers[i].y,cubers[i].z);
        if(cubers[i].coold==0){
            cubers[i].move();
            cubers[i].trans++;
            if(cubers[i].trans==20){
                cubers[i].trans=0;
                cubers[i].coold=50;
                if(cubers[i].age<100){
                    cubers[i].size+=0.025f;
                }
                else if(cubers[i].age==150){
                    cubers[i].deliver(i);
                }
                cubers[i].dir=rand()%8;
                cubers[i].age+=10;
            }
        }
        else cubers[i].coold--;
        render_p(i);
        //glPopMatrix();
    }
}
void display(void){
    key_func();
    glClearColor(0.6f,0.6f,0.6f,1.f);
    glClear (GL_COLOR_BUFFER_BIT);
    glLoadIdentity();
    glTranslatef(camx,camy,zoomlvl);
    process_cubers();
    glutSwapBuffers();
    SDL_Delay(1000/30);
    glutPostRedisplay();
}
void resize(int width,int height){
    glViewport(0,0,(GLsizei)width,(GLsizei)height);
    glMatrixMode(GL_PROJECTION);
    glLoadIdentity();
    gluPerspective(60,(GLfloat)width/(GLfloat)height,1.f,100.f);
    glMatrixMode(GL_MODELVIEW);
}
int main (int argc, char **argv) {
    initkeys();
    glutInit(&argc, argv);
    glutInitDisplayMode (GLUT_DOUBLE);
    glutInitWindowSize (640, 480);
    glutInitWindowPosition (0, 0); 
    glutCreateWindow ("opengl 1");
    glutDisplayFunc(display);
    glutIdleFunc(display);
    glutReshapeFunc(resize);
    glutKeyboardFunc(p_keys);
    glutKeyboardUpFunc(keyup);
    glutSpecialFunc(sp_keys);
    glutSpecialUpFunc(skeyup);
    glutMainLoop();
    return 0;
}

它呈现一定数量的所述方块，每个方格移动一定间隔。他们的移动距离是他们的大小。每次移动它们的尺寸都会增大，直到达到尺寸限制（在这种情况下为半径为1.f）经过一定的移动（在这种情况下为15）后，正方形将分成4个较小的正方形并填充完整的空间它的前体占据了，这意味着它应该看起来完全无缝......问题是，我得到了这个分裂的第二次撕裂＆amp;在方形分裂之后出现毛刺般的渲染，但除此之外我没有发现任何其他问题。

我怀疑也许是我错过了一些gl函数我应该在我渲染新的3个正方形时调用（通过添加3个新正方形进行分割，并将当前的正方形缩小到其大小的四分之一，然后调整所有的平方。）

2 个答案:

答案 0 :(得分：0)

图形渲染的工作方式（OpenGL或其他方式）是它只保证两个三角形之间的“漂亮”接缝，如果将它们渲染为同一个三角形条带的一部分，则它们沿某些边缘“精确”对齐，相同（顶点缓冲区，索引缓冲区）模型对，或将三角形组合成单个渲染单元的其他构造。

渲染“四边形”时，您实际上渲染的是一个2角三角形条带，因此两个三角形之间的缝隙看起来很不错。

渲染两条沿着某条边对齐的单独四边形时，边缘看起来很糟糕。消除锯齿可以帮助解决问题，但最终你需要使用单个渲染单元，如果你想摆脱沿着接缝的撕裂。

该图显示了在网格中渲染的四个四边形（八个三角形）。对角线在四边形内部，因此没有任何撕裂，但是由于四边形都是单独渲染的，因此沿着它们的接缝撕裂。

rendering four quads

答案 1 :(得分：0)

试试这个：

#include <GL/glew.h>
#include <GL/glut.h>

typedef unsigned short us;
typedef unsigned char uc;

bool *keystates = new bool[256];
bool *skeystates= new bool[256];
uc dir_m[8][2]=
{
    { 0, 1 },
    { 0,-1 },
    { -1,0 },
    { 1,0 },
    { 1,1},
    { 1,-1 },
    { -1,-1 },
    { -1,1 }
};

us totalbots=15;

float zoomlvl=-70.f;
float camx=0.f,camy=0.f;

struct bot_data
{
    float x,y,z;
    float r,g,b;
    float size; //    "radius" of the square
    us coold;
    us age;
    us trans:5;
    us dir:3,fac:2;
    bot_data(void);
    void move(void);
    void deliver(us bot);
};

struct bool_data
{
    bool ch:1,ch2:1;
};

bot_data::bot_data(void)
{
    size=0.25f;
    fac=rand()%4;
    switch(fac){
    case 0:x=10.f,y=10.f,z=0.f;
        r=1.0f,g=0.f,b=0.f;
        break;
    case 1:x=-10.f,y=-10.f,z=0.f;
        r=0.0f,g=0.f,b=1.f;
        break;
    case 2:x=-10.f,y=10.f,z=0.f;
        r=1.0f,g=1.f,b=0.f;
        break;
    case 3:x=10.f,y=-10.f,z=0.f;
        r=0.0f,g=1.f,b=0.f;
        break;
    }
    coold=0;
    trans=0;
    age=0;
    dir=rand()%8;
}

bot_data *cubers=new bot_data[65536];
bool_data *bools=new bool_data;

void bot_data::move(void)
{
    float move=size/10.f;
    switch(dir){
    case 0:y+=move;
        break;
    case 1:y-=move;
        break;
    case 2:x-=move;
        break;
    case 3:x+=move;
        break;
    case 4:x+=move;
        y+=move;
        break;
    case 5:x+=move;
        y-=move;
        break;
    case 6:y-=move;
        x-=move;
        break;
    case 7:y+=move;
        x-=move;
        break;
    }
}

void bot_data::deliver(us bot)
{
    age=-10;
    totalbots+=3;
    float tmp=size-(size/4.f);
    size=0.25f;
    x-=size;
    y+=size;
    for(uc i=1;i<=3;i++){
        cubers[totalbots-i].fac=fac;
        switch(fac){
        case 0:cubers[totalbots-i].r=1.0f,cubers[totalbots-i].g=0.f,cubers[totalbots-i].b=0.f;
            break;
        case 1:cubers[totalbots-i].r=0.0f,cubers[totalbots-i].g=0.f,cubers[totalbots-i].b=1.f;
            break;
        case 2:cubers[totalbots-i].r=1.0f,cubers[totalbots-i].g=1.f,cubers[totalbots-i].b=0.f;
            break;
        case 3:cubers[totalbots-i].r=0.0f,cubers[totalbots-i].g=1.f,cubers[totalbots-i].b=0.f;
            break;
        }
        cubers[totalbots-i].coold=coold;
        cubers[totalbots-i].size=size;
        switch(i){
        case 1:cubers[totalbots-i].x=x;
            cubers[totalbots-i].y=y-size*2;
            break;
        case 2:cubers[totalbots-i].x=x+size*2;
            cubers[totalbots-i].y=y;
            break;
        case 3:cubers[totalbots-i].x=x+size*2;
            cubers[totalbots-i].y=y-size*2;
            break;
        }
    }
}

void initkeys(void)
{
    for(uc i=0;i<255;i++){
        keystates[i]=false;
        skeystates[i]=false;
    }
}

void p_keys(unsigned char key, int x, int y)
{
    keystates[key]=true;
}

void keyup(unsigned char key, int x, int y)
{
    keystates[key]=false;
}

void sp_keys(int key, int x, int y)
{
    skeystates[key]=true;
}

void skeyup(int key, int x, int y)
{
    skeystates[key]=false;
}

void key_func(void)
{
    if (keystates['z'])
    {
        if(skeystates[GLUT_KEY_UP])zoomlvl+=1.f;
        if(skeystates[GLUT_KEY_DOWN])zoomlvl-=1.f;
        if(zoomlvl<-100.0f)zoomlvl=-100.f;
        if(zoomlvl>-5.f)zoomlvl=-5.f;
    }
    else
    {
        if(skeystates[GLUT_KEY_UP])camy-=1.f;
        if(skeystates[GLUT_KEY_DOWN])camy+=1.f;
        if(skeystates[GLUT_KEY_LEFT])camx+=1.f;
        if(skeystates[GLUT_KEY_RIGHT])camx-=1.f;
    }
}

void render_p(us bot)
{
    glColor3f(cubers[bot].r,cubers[bot].g,cubers[bot].b);
    glBegin(GL_QUADS);
    glVertex2f(cubers[bot].size,cubers[bot].size);
    glVertex2f(cubers[bot].size,-cubers[bot].size);
    glVertex2f(-cubers[bot].size,-cubers[bot].size);
    glVertex2f(-cubers[bot].size,cubers[bot].size);
    glEnd();
}

void process_cubers(void)
{
    for(us i=0;i<totalbots;i++){
        if(cubers[i].coold==0){
            cubers[i].move();
            cubers[i].trans++;
            if(cubers[i].trans==20){
                cubers[i].trans=0;
                cubers[i].coold=50;
                if(cubers[i].age<100){
                    cubers[i].size+=0.025f;
                }
                else if(cubers[i].age==150){
                    cubers[i].deliver(i);
                }
                cubers[i].dir=rand()%8;
                cubers[i].age+=10;
            }
        }
        else cubers[i].coold--;
    }

    for(us i=0;i<totalbots;i++)
    {
        glPushMatrix();
        glTranslatef(cubers[i].x,cubers[i].y,cubers[i].z);
        render_p(i);
        glPopMatrix();
    }
}

void display(void)
{
    key_func();
    glClearColor(0.6f,0.6f,0.6f,1.f);
    glClear (GL_COLOR_BUFFER_BIT);

    glMatrixMode(GL_PROJECTION);
    glLoadIdentity();
    double w = glutGet( GLUT_WINDOW_WIDTH );
    double h = glutGet( GLUT_WINDOW_HEIGHT );
    gluPerspective(60, w / h,1.f,100.f);

    glMatrixMode(GL_MODELVIEW);
    glLoadIdentity();
    glTranslatef(camx,camy,zoomlvl);

    process_cubers();
    glutSwapBuffers();
}

void timer(int extra)
{
    glutPostRedisplay();
    glutTimerFunc(33, timer, 0);
}

int main (int argc, char **argv) 
{
    initkeys();
    glutInit(&argc, argv);
    glutInitDisplayMode (GLUT_RGBA | GLUT_DOUBLE);
    glutInitWindowSize (640, 480);
    glutInitWindowPosition (0, 0); 
    glutCreateWindow ("opengl 1");
    glutDisplayFunc(display);
    glutKeyboardFunc(p_keys);
    glutKeyboardUpFunc(keyup);
    glutSpecialFunc(sp_keys);
    glutSpecialUpFunc(skeyup);
    glutTimerFunc(0, timer, 0);
    glutMainLoop();
    return 0;
}

您正在绘制模拟循环。这将它分成两个循环，然后是sim。

相关问题
最新问题