Question

我正在使用stargazer包将R数据帧输出为乳胶代码：

library(stargazer)

stargazer(mtcars)

这是输出

% Table created by StarGazer v.3.0.1 by Marek Hlavac, Harvard University. E-mail: hlavac at fas.harvard.edu
% Date and time: Thu, May 09, 2013 - 16:14:28
\begin{table}[htb] \centering 
  \caption{} 
  \label{} 
\footnotesize 

\begin{tabular}{@{\extracolsep{5pt}}l c c c c c } 
\\[-1.8ex]\hline 
\hline \\[-1.8ex] 
Statistic & \multicolumn{1}{c}{N} & \multicolumn{1}{c}{Mean} & \multicolumn{1}{c}{St. Dev.} & \multicolumn{1}{c}{Min} & \multicolumn{1}{c}{Max} \\ 
\hline \\[-1.8ex] 
mpg & 32 & 20.091 & 6.027 & 10.400 & 33.900 \\ 
cyl & 32 & 6.188 & 1.786 & 4 & 8 \\ 
disp & 32 & 230.722 & 123.939 & 71.100 & 472.000 \\ 
hp & 32 & 146.688 & 68.563 & 52 & 335 \\ 
drat & 32 & 3.597 & 0.535 & 2.760 & 4.930 \\ 
wt & 32 & 3.217 & 0.978 & 1.513 & 5.424 \\ 
qsec & 32 & 17.849 & 1.787 & 14.500 & 22.900 \\ 
vs & 32 & 0.438 & 0.504 & 0 & 1 \\ 
am & 32 & 0.406 & 0.499 & 0 & 1 \\ 
gear & 32 & 3.688 & 0.738 & 3 & 5 \\ 
carb & 32 & 2.812 & 1.615 & 1 & 8 \\ 
\hline \\[-1.8ex] 
\normalsize 
\end{tabular} 
\end{table}

注意输出包括两行乳胶注释（前两行，开头％）。如何停止输出前两行（开头％）？

类似的问题，但有关xtable（）的问题在这里被问到：Using table caption on R markdown file using knitr to use in pandoc to convert to pdf

Answer 1

从版本4.0开始（现在可在CRAN上使用），您可以使用参数header = FALSE运行stargazer，以省略Latex代码输出中的初始注释。

Answer 2

可以直接修改输出

mod_stargazer <- function(...){
  output <- capture.output(stargazer(...))
  # The first three lines are the ones we want to remove...
  output <- output[4:length(output)]
  # cat out the results - this is essentially just what stargazer does too
  cat(paste(output, collapse = "\n"), "\n")
}

给出了

> mod_stargazer(mtcars)
\begin{table}[htb] \centering 
  \caption{} 
  \label{} 
\footnotesize 

\begin{tabular}{@{\extracolsep{5pt}}l c c c c c } 
\\[-1.8ex]\hline 
\hline \\[-1.8ex] 
Statistic & \multicolumn{1}{c}{N} & \multicolumn{1}{c}{Mean} & \multicolumn{1}{c}{St. Dev.} & \multicolumn{1}{c}{Min} & \multicolumn{1}{c}{Max} \\ 
\hline \\[-1.8ex] 
mpg & 32 & 20.091 & 6.027 & 10.400 & 33.900 \\ 
cyl & 32 & 6.188 & 1.786 & 4 & 8 \\ 
disp & 32 & 230.722 & 123.939 & 71.100 & 472.000 \\ 
hp & 32 & 146.688 & 68.563 & 52 & 335 \\ 
drat & 32 & 3.597 & 0.535 & 2.760 & 4.930 \\ 
wt & 32 & 3.217 & 0.978 & 1.513 & 5.424 \\ 
qsec & 32 & 17.849 & 1.787 & 14.500 & 22.900 \\ 
vs & 32 & 0.438 & 0.504 & 0 & 1 \\ 
am & 32 & 0.406 & 0.499 & 0 & 1 \\ 
gear & 32 & 3.688 & 0.738 & 3 & 5 \\ 
carb & 32 & 2.812 & 1.615 & 1 & 8 \\ 
\hline \\[-1.8ex] 
\normalsize 
\end{tabular} 
\end{table}

如何抑制输出文件中的stargazer（）信息

2 个答案: