我创建了两个类:Initiator和Acceptor。我想从发起者向接受者发送消息,然后处理收到的消息。我无法发送消息。
这是我的initiator.java
SocketInitiator socketInitiator = null;
String fileName = "conf/intiator.cfg";
try {
SessionSettings initiatorSettings = new SessionSettings(new FileInputStream(fileName));
Application initiatorApplication = new Initiator();
FileStoreFactory fileStoreFactory = new FileStoreFactory(
initiatorSettings);
FileLogFactory fileLogFactory = new FileLogFactory(
initiatorSettings);
MessageFactory messageFactory = new DefaultMessageFactory();
socketInitiator = new SocketInitiator(initiatorApplication, fileStoreFactory, initiatorSettings, fileLogFactory, messageFactory);
socketInitiator.start();
Message msg = new Message();
msg.setString(1, "Hello this is test Message");
SessionID sessionId = (SessionID) socketInitiator.getSessions().get(0);
Session.lookupSession(sessionId).logon();
initiatorApplication.onLogon(sessionId);
initiatorApplication.toApp(msg, sessionId);
} catch (Exception e) {
e.printStackTrace();
}
以下是应用程序界面的overRide消息。
public void toApp(Message message, SessionID sessionId) throws DoNotSend {
try {
boolean result = quickfix.Session.sendToTarget(message, sessionId);
if (result) {
System.out.println("Message ahs send :)");
} else {
System.out.println("Not Send");
}
} catch (Exception e) {
e.printStackTrace();
}
}
这是发起人initiator.cfg文件
[default]
StartTime=00:00:01
EndTime=23:59:59
HeartBtInt=10
SocketUseSSL=N
MillisecondsInTimeStamp=Y
FileIncludeMilliseconds=Y
CheckLatency=N
SocketTcpNoDelay=Y
[session]
BeginString=FIX.4.4
ConnectionType=initiator
DisableQuickFixReconnLogic=Y
AdapterUserIndex=0
SocketConnectHost=127.0.0.1
Timezone=America/New_York
SocketConnectPort=3000
UseDataDictionary=Y
DataDictionary=conf/resources/FIX44.xml
ValidateFieldsOutOfOrder=N
ValidateFieldsHaveValues=N
ValidateUserDefinedFields=N
LogonTimeout=10
FileStorePath=conf/connector
FileLogPath=conf/connector/logs
FileLogBackupPath=conf/connector
ResetOnLogout=Y
ResetOnDisconnect=N
SendResetSeqNumFlag=Y
RawData=fxall123
#SessionQualifier=FXallStream
MillisecondsInTimeStamp=Y
FileIncludeMilliseconds=Y
[session]
BeginString=FIX.4.4
ConnectionType=initiator
DisableQuickFixReconnLogic=Y
AdapterUserIndex=1
SenderCompID=initiator-id
#SenderSubID=trader1
#TargetCompID=target-id
#TargetSubID=qftrade
SocketConnectHost=127.0.0.1
Timezone=America/New_York
#SocketConnectPort=443
SocketConnectPort=3000
UseDataDictionary=Y
DataDictionary=conf/resources/FIX44.xml
ValidateFieldsOutOfOrder=N
ValidateFieldsHaveValues=N
ValidateUserDefinedFields=N
LogonTimeout=5
FileStorePath=conf/connector
FileLogPath=conf/connector
FileLogBackupPath=conf/connector/backup
ResetOnLogout=Y
ResetOnLogon=Y
ResetOnDisconnect=N
SendResetSeqNumFlag=Y
RawData=fxall123
#SessionQualifier=FXallTrade
Acceptor.java
String fileName = "conf/acceptor.cfg";
SocketAcceptor socketAcceptor = null;
try {
FileInputStream is = new FileInputStream(fileName);
SessionSettings executorSettings = new SessionSettings(is);
Application application = new Acceptor();
FileStoreFactory fileStoreFactory = new FileStoreFactory(
executorSettings);
MessageFactory messageFactory = new DefaultMessageFactory();
FileLogFactory fileLogFactory = new FileLogFactory(executorSettings);
socketAcceptor = new SocketAcceptor(application, fileStoreFactory,
executorSettings, fileLogFactory, messageFactory);
socketAcceptor.start();
SessionID sessionId = (SessionID) socketAcceptor.getSessions().get(0);
application.onLogon(sessionId);
int[] i = {1, 2, 3, 4, 5};
// application.fromApp(new Message(i), sessionId);
} catch (Exception e) {
e.printStackTrace();
}
acceptor.cfg
[default]
StartTime=00:00:00
EndTime=23:50:00
HeartBtInt=10
ReconnectInterval=6
SocketUseSSL=N
MillisecondsInTimeStamp=Y
CheckLatency=N
SocketTcpNoDelay=N
SocketAcceptAddress=127.0.0.1
SocketAcceptPort=3000
[session]
BeginString=FIX.4.4
ConnectionType=acceptor
#DisableQuickFixReconnLogic=Y
AdapterUserIndex=0
SenderCompID=target-id
#SenderSubID=qfstream
#TargetCompID=inttest
#TargetSubID=trader1
Timezone=America/New_York
UseDataDictionary=Y
DataDictionary=conf/resources/FIX44.xml
ValidateFieldsOutOfOrder=N
ValidateFieldsHaveValues=N
ValidateUserDefinedFields=N
LogonTimeout=5
FileStorePath=conf/Acceptor
FileLogPath=conf/Acceptor/logs
ResetOnLogout=Y
ResetOnDisconnect=N
SendResetSeqNumFlag=Y
谁能告诉我问题出在哪里?在配置中还是在代码中?
答案 0 :(得分:5)
我将指出显而易见的(此代码有很多错误,请参阅示例以了解quickfixj的工作原理)。您尝试发送的Message
不是有效的FIX消息,因此在发送之前引擎会拒绝该消息。您需要创建一个真正的FIX消息,以便quickfix发送它。同样重要的是,我需要提一下toApp
是一个在发送消息时被调用的事件处理程序。如果您打电话给quickfix.Session.sendToTarget
,则会在发送时再次致电toApp
。由于toApp
中没有控制语句,因此会导致无限循环。配置也略有错误,其他代码看起来很奇怪,但这些是你最大的问题。请查看文档和示例。
答案 1 :(得分:2)
您需要在xml文件中进行更改。我猜你正在使用的字段没有在fix.4.4文件中声明。检查您的xml文件并按以下方式包含它。
我希望发送带有货币的QuoteID,但是在货币中没有声明QuoteID。在这种情况下,您将无法发送消息。 你需要在fix.4.4 /或你正在使用的任何版本中删除该字段(QuoteID)。
<Currency>
//
//
<field name="QuoteID" required="N" /> // N or Y depend on your requirement
//
//
</currency>
还检查日志,你会在那里找到错误信息。
可能是您不包括也会产生问题的必填字段。 使用以下链接检查所需的字段。 http://www.fixprotocol.org/FIXimate3.0/