Question

我有以下问题。声音在公共文件夹中隐藏，因为只有某些用户应该有权访问声音文件。所以我做了一个特定的方法，它就像一个声音网址，但首先计算，是否允许当前用户访问该文件。

该文件由send_data方法发送。问题是，如果它工作得很好我工作得很慢...我用来播放声音的jplayer插件的开发者告诉我，我应该能够接受字节范围请求以使其正常工作...

如何通过发送带有send_data或send_file的文件在rails控制器中执行此操作？

谢谢，马库斯

Answer 1

我已经能够使用send_file成功提供文件了。虽然我有一个故障，寻找歌曲的早期部分会导致一个新的请求，使歌曲从0:00重新开始，而不是从搜索栏中的真实位置。这是我到目前为止为我工作的原因：

  file_begin = 0
  file_size = @media.file_file_size 
  file_end = file_size - 1

  if !request.headers["Range"]
    status_code = "200 OK"
  else
    status_code = "206 Partial Content"
    match = request.headers['range'].match(/bytes=(\d+)-(\d*)/)
    if match
      file_begin = match[1]
      file_end = match[1] if match[2] && !match[2].empty?
    end
    response.header["Content-Range"] = "bytes " + file_begin.to_s + "-" + file_end.to_s + "/" + file_size.to_s
  end
  response.header["Content-Length"] = (file_end.to_i - file_begin.to_i + 1).to_s
  response.header["Last-Modified"] = @media.file_updated_at.to_s

  response.header["Cache-Control"] = "public, must-revalidate, max-age=0"
  response.header["Pragma"] = "no-cache"
  response.header["Accept-Ranges"]=  "bytes"
  response.header["Content-Transfer-Encoding"] = "binary"
  send_file(DataAccess.getUserMusicDirectory(current_user.public_token) + @media.sub_path, 
            :filename => @media.file_file_name,
            :type => @media.file_content_type, 
            :disposition => "inline",
            :status => status_code,
            :stream =>  'true',
            :buffer_size  =>  4096)

Answer 2

这是我的版本。我使用gem'ogginfo-rb'来计算正确提供ogg文件所需的持续时间。附：我总是有三种格式 - wav，mp3，ogg。

the_file = File.open(file_path)

file_begin = 0
file_size = the_file.size
file_end = file_size - 1

if request.headers['Range']
  status_code = :partial_content

  match = request.headers['range'].match(/bytes=(\d+)-(\d*)/)

  if match
    file_begin = match[1]
    file_end = match[1]  if match[2] and not match[2].empty?
  end

  response.headers['Content-Range'] = "bytes #{file_begin}-#{file_end.to_i + (match[2] == '1' ? 1 : 0)}/#{file_size}"
else
  status_code = :ok
end

response.headers['Content-Length'] = (file_end.to_i - file_begin.to_i + 1).to_s
response.headers['Last-Modified'] = the_file.mtime

response.headers['Cache-Control'] = 'public, must-revalidate, max-age=0'
response.headers['Pragma'] = 'no-cache'
response.headers['Accept-Ranges'] = 'bytes'
response.headers['Content-Transfer-Encoding'] = 'binary'

require 'ogginfo-rb'
ogginfo = Ogg::Info::open(the_file.path.gsub(/.mp3|.wav/,'.ogg'))
duration = ogginfo.duration.to_f

response.headers['Content-Duration'] = duration
response.headers['X-Content-Duration'] = duration

send_file file_path,
          filename: "#{call.id}.#{ext}",
          type: Mime::Type.lookup_by_extension(ext),
          status: status_code,
          disposition: 'inline',
          stream: 'true',
          buffer_size: 32768

Answer 3

另一个修改版本 - 我试图将zip文件作为二进制内容下载，这对我有用 -

  def byte_range_response (request, response, content)
    file_begin = 0
    file_size = content.bytesize
    file_end = file_size - 1

    status_code = '206 Partial Content'
    match = request.headers['range'].match(/bytes=(\d+)-(\d*)/)
    if match
      file_begin = match[1]
      file_end = match[2] if match[2] && !match[2].empty?
    end
    content_length = file_end.to_i - file_begin.to_i + 1
    response.header['Content-Range'] = 'bytes ' + file_begin.to_s + '-' + file_end.to_s + '/' + file_size.to_s
    response.header['Content-Length'] = content_length.to_s
    response.header['Cache-Control'] = 'public, must-revalidate, max-age=0'
    response.header['Pragma'] = 'no-cache'
    response.header['Accept-Ranges']= 'bytes'
    response.header['Content-Transfer-Encoding'] = 'binary'
    send_data get_partial_content(content, content_length, file_begin.to_i), type: 'application/octet-stream', status: status_code
  end

  def get_partial_content(content, content_length, offset)
    test_file = Tempfile.new(['test-file', '.zip'])
    test_file.puts(content)
    partial_content = IO.binread(test_file.path, content_length, offset)
    test_file.close
    test_file.unlink
    partial_content
  end

Answer 4

我使用了Garrett的答案并对其进行了修改（包括一两个错误修复）。我还使用了send_data而不是从文件中读取内容：

  def stream_data data, options={}
    range_start = 0
    file_size = data.length
    range_end = file_size - 1
    status_code = "200"

    if request.headers["Range"]
      status_code = "206"
      request.headers['range'].match(/bytes=(\d+)-(\d*)/).try do |match|
        range_start = match[1].to_i
        range_end = match[2].to_i unless match[2]&.empty?
      end
      response.header["Content-Range"] = "bytes #{range_start}-#{range_end}/#{file_size}"
    end

    response.header["Content-Length"] = (range_end - range_start + 1).to_s
    response.header["Accept-Ranges"] = "bytes"

    send_data(data[range_start, range_end],
              filename: options[:filename],
              type: options[:type],
              disposition: "inline",
              status: status_code)
  end

rails media file stream通过send_data或send_file方法接受字节范围请求

4 个答案: