Question

在AVR Studio 5中创建项目时，它会创建一个包含以下内容的.c文件：

#include <avr/io.h>

int main(void)
{
    while(1)
    {
        //TODO:: Please write your application code 
    }
}

构建此C程序可以正常工作：

------ Rebuild All started: Project: AVRGCC2, Configuration: Debug AVR ------
Build started.
Project "AVRGCC2.avrgccproj" (ReBuild target(s)):
Target "PreBuildEvent" skipped, due to false condition; ('$(PreBuildEvent)'!='') was evaluated as (''!='').
Target "CoreRebuild" in file "C:\Programme\Atmel\AVR Studio 5.0\Vs\AvrGCC.targets" from project "C:\Dokumente und Einstellungen\tom\Eigene Dateien\AVRStudio\test\AVRGCC2\AVRGCC2\AVRGCC2.avrgccproj" (target "ReBuild" depends on it):
    Task "RunAvrGCC"
        C:\Programme\Atmel\AVR Studio 5.0\AVR ToolChain\bin\make.exe clean all 
        rm -rf  AVRGCC2.o AVRGCC2.d   libAVRGCC2.a  AVRGCC2.hex  AVRGCC2.eep  AVRGCC2.lss AVRGCC2.map
AVRGCC2.c
        Invoking: AVR/GNU C Compiler
        "C:/Programme/Atmel/AVR Studio 5.0/AVR ToolChain/bin/avr-gcc.exe" -funsigned-char -funsigned-bitfields -O0 -fpack-struct -fshort-enums -g2 -Wall -c -std=gnu99  -mmcu=atmega328p   -MD -MP -MF"AVRGCC2.d" -MT"AVRGCC2.d" -o"AVRGCC2.o" ".././AVRGCC2.c"
        Finished building: .././AVRGCC2.c
        Building target: AVRGCC2.elf
        Invoking: AVR/GNU C/C++ Linker
        "C:/Programme/Atmel/AVR Studio 5.0/AVR ToolChain/bin/avr-gcc.exe"  -mmcu=atmega328p  -Wl,-Map=AVRGCC2.map -o AVRGCC2.elf  AVRGCC2.o  
        Finished building target: AVRGCC2.elf
        "C:/Programme/Atmel/AVR Studio 5.0/AVR ToolChain/bin/avr-objcopy.exe" -O ihex -R .eeprom -R .fuse -R .lock -R .signature  "AVRGCC2.elf" "AVRGCC2.hex"
        "C:/Programme/Atmel/AVR Studio 5.0/AVR ToolChain/bin/avr-objdump.exe" -h -S "AVRGCC2.elf" > "AVRGCC2.lss"
        "C:/Programme/Atmel/AVR Studio 5.0/AVR ToolChain/bin/avr-objcopy.exe" -j .eeprom --set-section-flags=.eeprom=alloc,load --change-section-lma .eeprom=0 --no-change-warnings -O ihex "AVRGCC2.elf" "AVRGCC2.eep" || exit 0
        AVR Memory Usage
        ----------------
        Device: atmega328p
        Program:     142 bytes (0.4% Full)
        (.text + .data + .bootloader)
        Data:          0 bytes (0.0% Full)
        (.data + .bss + .noinit)
    Done executing task "RunAvrGCC".
Done building target "CoreRebuild" in project "AVRGCC2.avrgccproj".
Target "PostBuildEvent" skipped, due to false condition; ('$(PostBuildEvent)' != '') was evaluated as ('' != '').
Target "ReBuild" in file "C:\Programme\Atmel\AVR Studio 5.0\Vs\Avr.common.targets" from project "C:\Dokumente und Einstellungen\tom\Eigene Dateien\AVRStudio\test\AVRGCC2\AVRGCC2\AVRGCC2.avrgccproj" (entry point):
Done building target "ReBuild" in project "AVRGCC2.avrgccproj".
Done building project "AVRGCC2.avrgccproj".

Build succeeded.
========== Rebuild All: 1 succeeded, 0 failed, 0 skipped ==========

但是当我将文件扩展名更改为.cpp时，构建会发出警告未定义的设备类型（如果尝试使用任何特定于AVR的寄存器，将会变成错误）：

------ Rebuild All started: Project: AVRGCC2, Configuration: Debug AVR ------
Build started.
Project "AVRGCC2.avrgccproj" (ReBuild target(s)):
Target "PreBuildEvent" skipped, due to false condition; ('$(PreBuildEvent)'!='') was evaluated as (''!='').
Target "CoreRebuild" in file "C:\Programme\Atmel\AVR Studio 5.0\Vs\AvrGCC.targets" from project "C:\Dokumente und Einstellungen\tom\Eigene Dateien\AVRStudio\test\AVRGCC2\AVRGCC2\AVRGCC2.avrgccproj" (target "ReBuild" depends on it):
    Task "RunAvrGCC"
        C:\Programme\Atmel\AVR Studio 5.0\AVR ToolChain\bin\make.exe clean all 
        In file included from .././AVRGCC2.cpp:1:0:
c:\programme\atmel\avr studio 5.0\avr toolchain\bin\../lib/gcc/avr/4.5.1/../../../../avr/include/avr/io.h(446,6): #warning "device type not defined"
        rm -rf  AVRGCC2.o AVRGCC2.d   libAVRGCC2.a  AVRGCC2.hex  AVRGCC2.eep  AVRGCC2.lss AVRGCC2.map
AVRGCC2.cpp
        Invoking: AVR/GNU CPP Compiler
        "C:/Programme/Atmel/AVR Studio 5.0/AVR ToolChain/bin/avr-g++.exe"   -MD -MP -MF"AVRGCC2.d" -MT"AVRGCC2.d" -o"AVRGCC2.o" ".././AVRGCC2.cpp"
        Finished building: .././AVRGCC2.cpp
        Building target: AVRGCC2.elf
        Invoking: AVR/GNU C/C++ Linker
        "C:/Programme/Atmel/AVR Studio 5.0/AVR ToolChain/bin/avr-gcc.exe"  -mmcu=atmega328p  -Wl,-Map=AVRGCC2.map -o AVRGCC2.elf  AVRGCC2.o  
        Finished building target: AVRGCC2.elf
        "C:/Programme/Atmel/AVR Studio 5.0/AVR ToolChain/bin/avr-objcopy.exe" -O ihex -R .eeprom -R .fuse -R .lock -R .signature  "AVRGCC2.elf" "AVRGCC2.hex"
        "C:/Programme/Atmel/AVR Studio 5.0/AVR ToolChain/bin/avr-objdump.exe" -h -S "AVRGCC2.elf" > "AVRGCC2.lss"
        "C:/Programme/Atmel/AVR Studio 5.0/AVR ToolChain/bin/avr-objcopy.exe" -j .eeprom --set-section-flags=.eeprom=alloc,load --change-section-lma .eeprom=0 --no-change-warnings -O ihex "AVRGCC2.elf" "AVRGCC2.eep" || exit 0
        AVR Memory Usage
        ----------------
        Device: atmega328p
        Program:     142 bytes (0.4% Full)
        (.text + .data + .bootloader)
        Data:          0 bytes (0.0% Full)
        (.data + .bss + .noinit)
    Done executing task "RunAvrGCC".
Done building target "CoreRebuild" in project "AVRGCC2.avrgccproj".
Target "PostBuildEvent" skipped, due to false condition; ('$(PostBuildEvent)' != '') was evaluated as ('' != '').
Target "ReBuild" in file "C:\Programme\Atmel\AVR Studio 5.0\Vs\Avr.common.targets" from project "C:\Dokumente und Einstellungen\tom\Eigene Dateien\AVRStudio\test\AVRGCC2\AVRGCC2\AVRGCC2.avrgccproj" (entry point):
Done building target "ReBuild" in project "AVRGCC2.avrgccproj".
Done building project "AVRGCC2.avrgccproj".

Build succeeded.
========== Rebuild All: 1 succeeded, 0 failed, 0 skipped ==========

比较两个输出显示，对于C代码，它将选项-mmcu=atmega328p添加到avr-gcc.exe，但对于C ++代码，它在执行avr-g++.exe时不会。我在使用WinAVR时遇到的类似问题。怎么解决这个问题？

Answer 1

我找到了一种解决方法：将所有.cpp文件重命名为.c并定义以下编译器选项：-x c++ -std=gnu++98。

Answer 2

我意识到这是一个迟到的补充，但万一其他人偶然发现了这个：

您是否注意到在工具下有一个可用于AVR Studio 5的C ++扩展 - ＆gt;扩展经理？这使您可以使用.cpp扩展名和所有内容创建C ++项目。 Source

Answer 3

您是否尝试打开项目对话框并检查是否已设置devicetype？

AVR Studio 5：编译C ++代码

3 个答案: