如何在图表中添加大括号？
我想在R中制作以下图表：
如何绘制这些水平括号？
6 个答案:
答案 0 :(得分：21)
这样的事情怎么样？
plot(c(0,1), c(0,1))
text(x = 0.5, y = 0.5, '{', srt = 90, cex = 8, family = 'Helvetica Neue UltraLight')
根据您的目的进行调整。您可能会发现更轻的字体或更好的形状。如果你在网上搜索，有发际线字体。
答案 1 :(得分：15)
一个小小的谷歌搜索从R帮助邮件列表here上的一个帖子中找到一些网格代码。至少它给你一些工作。这是该帖子的代码：
library(grid)
# function to draw curly braces in red
# x1...y2 are the ends of the brace
# for upside down braces, x1 > x2 and y1 > y2
Brack <- function(x1,y1,x2,y2,h)
{
x2 <- x2-x1; y2 <- y2-y1
v1 <- viewport(x=x1,y=y1,width=sqrt(x2^2+y2^2),
height=h,angle=180*atan2(y2,x2)/pi,
just=c("left","bottom"),gp=gpar(col="red"))
pushViewport(v1)
grid.curve(x2=0,y2=0,x1=.125,y1=.5,curvature=.5)
grid.move.to(.125,.5)
grid.line.to(.375,.5)
grid.curve(x1=.375,y1=.5,x2=.5,y2=1,curvature=.5)
grid.curve(x2=1,y2=0,x1=.875,y1=.5,curvature=-.5)
grid.move.to(.875,.5)
grid.line.to(.625,.5)
grid.curve(x2=.625,y2=.5,x1=.5,y1=1,curvature=.5)
popViewport()}
答案 2 :(得分：7)
或者这个：
# Function to create curly braces
# x, y position where to put the braces
# range is the widht
# position: 1 vertical, 2 horizontal
# direction: 1 left/down, 2 right/up
CurlyBraces <- function(x, y, range, pos = 1, direction = 1 ) {
a=c(1,2,3,48,50) # set flexion point for spline
b=c(0,.2,.28,.7,.8) # set depth for spline flexion point
curve = spline(a, b, n = 50, method = "natural")$y / 2
curve = c(curve,rev(curve))
a_sequence = rep(x,100)
b_sequence = seq(y-range/2,y+range/2,length=100)
# direction
if(direction==1)
a_sequence = a_sequence+curve
if(direction==2)
a_sequence = a_sequence-curve
# pos
if(pos==1)
lines(a_sequence,b_sequence) # vertical
if(pos==2)
lines(b_sequence,a_sequence) # horizontal
}
plot(0,0,ylim=c(-10,10),xlim=c(-10,10))
CurlyBraces(2, 0, 10, pos = 1, direction = 1 )
CurlyBraces(2, 0, 5, pos = 1, direction = 2 )
CurlyBraces(1, 0, 10, pos = 2, direction = 1 )
CurlyBraces(1, 0, 5, pos = 2, direction = 2 )
答案 3 :(得分：6)
我认为pBrackets包是最优雅的解决方案。
要使用默认的绘图功能plot进行尝试，请查看包的插图以获取示例。
他们没有显示ggplot2的示例。您可以尝试使用我的代码here at stackoverflow将其与ggplot2图表一起使用。
最佳， Pankil
答案 4 :(得分：2)
使用旋转选项/并且每行（）又名par（）选项
我首先把Sharons的答案和另一个答案混为一谈，我发现了一个有更多可能性的新功能。但后来我添加了＃34;形状＆＃34;包装到游戏中，现在你可以将花括号放在你想要的每个角度。你不必使用这个包，但是如果你有2个不在水平或垂直线上的点，它将非常难看，没有形状== T.
CurlyBraces <- function(
# function to draw curly braces
x=NA, y=NA, # Option 1 (Midpoint) if you enter only x, y the position points the middle of the braces
x1=NA, y1=NA, # Option 2 (Point to Point) if you additionaly enter x1, y1 then x,y become one
# end of the brace and x1,y1 is the other end
range=NA, # (Option 1 only) range is the length of the brace
ang=0, # (Option 1 only, only with shape==T) ang will set the angle for rotation
depth = 1, # depth controls width of the shape
shape=T, # use of package "shape" necessary for angles other than 0 and 90
pos=1, # (only if shape==F) position: 1 vertical, 2 horizontal
direction=1, # (only if shape==F) direction: 1 left/down, 2 right/up
opt.lines="lty=1,lwd=2,col='red'") # All posible Options for lines from par (exept: xpd)
# enter as 1 character string or as character vector
{
if(shape==F){
# only x & y are given so range is for length
if(is.na(x1) | is.na(y1)){
a_sequence = rep(x,100)
b_sequence = seq(y-range/2,y+range/2,length=100)
if (pos == 2){
a_sequence = rep(y,100)
b_sequence = seq(x-range/2,x+range/2,length=100)
}
}
# 2 pairs of coordinates are given range is not needed
if(!is.na(x1) & !is.na(y1)){
if (pos == 1){
a_sequence = seq(x,x1,length=100)
b_sequence = seq(y,y1,length=100)
}
if (pos == 2){
b_sequence = seq(x,x1,length=100)
a_sequence = seq(y,y1,length=100)
}
}
# direction
if(direction==1)
a_sequence = a_sequence+curve
if(direction==2)
a_sequence = a_sequence-curve
# pos
if(pos==1)
lines(a_sequence,b_sequence, lwd=lwd, col=col, lty=lty, xpd=NA) # vertical
if(pos==2)
lines(b_sequence,a_sequence, lwd=lwd, col=col, lty=lty, xpd=NA) # horizontal
}
if(shape==T) {
# Enable input of variables of length 2 or 4
if(!("shape" %in% installed.packages())) install.packages("shape")
library("shape")
if(length(x)==2) {
helpx <- x
x<-helpx[1]
y<-helpx[2]}
if(length(x)==4) {
helpx <- x
x =helpx[1]
y =helpx[2]
x1=helpx[3]
y1=helpx[4]
}
# Check input
if((is.na(x) | is.na(y) )) stop("Set x & y")
if((!is.na(x1) & is.na(y1)) | ((is.na(x1) & !is.na(y1))))stop("Set x1 & y1")
if((is.na(x1) & is.na(y1)) & is.na(range)) stop("Set range > 0")
a=c(1,2,3,48,50) # set flexion point for spline
b=c(0,.2,.28,.7,.8) # set depth for spline flexion point
curve = spline(a, b, n = 50, method = "natural")$y * depth
curve = c(curve,rev(curve))
if(!is.na(x1) & !is.na(y1)){
ang=atan2(y1-y,x1-x)*180/pi-90
range = sqrt(sum((c(x,y) - c(x1,y1)) ^ 2))
x = (x + x1)/2
y = (y + y1)/2
}
a_sequence = rep(x,100)+curve
b_sequence = seq(y-range/2,y+range/2,length=100)
eval(parse(text=paste("lines(rotatexy(cbind(a_sequence,b_sequence),mid=c(x,y), angle =ang ),",
paste(opt.lines, collapse = ", ")
,", xpd=NA)")))
}
}
# # Some Examples with shape==T
# plot(c(),c(),ylim=c(-10,10),xlim=c(-10,10))
# grid()
#
# CurlyBraces(4,-2,4,2, opt.lines = "lty=1,col='blue' ,lwd=2")
# CurlyBraces(4,2,2,4, opt.lines = "col=2, lty=1 ,lwd=0.5")
# points(3,3)
# segments(4,2,2,4,lty = 2)
# segments(3,3,4,4,lty = 2)
# segments(4,2,5,3,lty = 2)
# segments(2,4,3,5,lty = 2)
# CurlyBraces(2,4,4,2, opt.lines = "col=2, lty=2 ,lwd=0.5") # Reverse entry of datapoints changes direction of brace
#
# CurlyBraces(2,4,-2,4, opt.lines = "col=3 , lty=1 ,lwd=0.5")
# CurlyBraces(-2,4,-4,2, opt.lines = "col=4 , lty=1 ,lwd=0.5")
# CurlyBraces(-4,2,-4,-2, opt.lines = "col=5 , lty=1 ,lwd=0.5")
# CurlyBraces(-4,-2,-2,-4, opt.lines = "col=6 , lty=1 ,lwd=0.5")
# CurlyBraces(-2,-4,2,-4, opt.lines = "col=7 , lty=1 ,lwd=0.5")
# CurlyBraces(2,-4,4,-2, opt.lines = "col=8 , lty=1 ,lwd=0.5")
#
# CurlyBraces( 7.5, 0, ang= 0 , range=5, opt.lines = "col=1 , lty=1 ,lwd=2 " )
# CurlyBraces( 5, 5, ang= 45 , range=5, opt.lines = "col=2 , lty=1 ,lwd=2 " )
# CurlyBraces( 0, 7.5, ang= 90 , range=5, opt.lines = "col=3, lty=1 ,lwd=2" )
# CurlyBraces( -5, 5, ang= 135 , range=5, opt.lines = "col='blue' , lty=1 ,lwd=2 " )
# CurlyBraces( -7.5, 0, ang= 180 , range=5, opt.lines = "col=5 , lty=1 ,lwd=2 " )
# CurlyBraces( -5, -5, ang= 225 , range=5, opt.lines = "col=6 , lty=1 ,lwd=2" )
# CurlyBraces( 0, -7.5, ang= 270 , range=5, opt.lines = "col=7, lty=1 ,lwd=2" )
# CurlyBraces( 5, -5, ang= 315 , range=5, opt.lines = "col=8 , lty=1 ,lwd=2" )
# points(5,5)
# segments(5,5,6,6,lty = 2)
# segments(7,3,3,7,lty = 2)
#
# # Or anywhere you klick
# locator(1) -> where # klick 1 positions in the plot with your Mouse
# CurlyBraces( where$x[1], where$y[1], range=3, ang=45 , opt.lines = "col='blue' , depth=1, lty=1 ,lwd=2" )
# locator(2) -> where # klick 2 positions in the plot with your Mouse
# CurlyBraces( where$x[1], where$y[1], where$x[2], where$y[2], opt.lines = "col='blue' , depth=2, lty=1 ,lwd=2" )
#
# # Some Examples with shape == F
# plot(c(),c(),ylim=c(-10,10),xlim=c(-10,10))
# grid()
#
# CurlyBraces( 5, 0, shape=F, range= 10, pos = 1, direction = 1 , depth=5 ,opt.lines = " col='red' , lty=1 ,lwd=2" )
# CurlyBraces(-5, 0, shape=F, range= 5, pos = 1, direction = 2 , opt.lines = "col='red' , lty=2 ,lwd=0.5")
# CurlyBraces( 1, 4, shape=F, range= 6, pos = 2, direction = 1 , opt.lines = "col='red' , lty=3 ,lwd=1.5")
# CurlyBraces(-1,-3, shape=F, range= 5, pos = 2, direction = 2 , opt.lines = "col='red' , lty=4 ,lwd=2" )
#
#
# CurlyBraces( 4, 4, 4,-4, shape=F, pos=1, direction = 1 , opt.lines = "col='blue' , lty=1 ,lwd=2" )
# CurlyBraces(-4, 4,-4,-4, shape=F, pos=1, direction = 2 , opt.lines = "col='blue' , lty=2 ,lwd=0.5")
# CurlyBraces(-2, 5, 2, 5, shape=F, pos=2, direction = 1 , opt.lines = "col='blue' , lty=3 ,lwd=1.5")
# CurlyBraces(-2,-1, 4,-1, shape=F, pos=2, direction = 2 , opt.lines = "col='blue' , lty=4 ,lwd=2" )
#
# # Or anywhere you klick
# locator(1) -> where # klick 1 positions in the plot with your Mouse
# CurlyBraces( where$x[1], where$y[1], range=3, shape=F, pos=2, direction = 2 , opt.lines = "col='blue' , depth=1, lty=1 ,lwd=2" )
# locator(2) -> where # klick 2 positions in the plot with your Mouse
# CurlyBraces( where$x[1], where$y[1], where$x[2], where$y[2], shape=F, pos=2, direction = 2 , opt.lines = "col='blue' , depth=0.2, lty=1 ,lwd=2" )
#
# # Some Examples with shape==T
# plot(c(),c(),ylim=c(-100,100),xlim=c(-1,1))
# grid()
#
# CurlyBraces(.4,-20,.4,20, depth=.1, opt.lines = "col=1 , lty=1 ,lwd=0.5")
# CurlyBraces(.4,20,.2,40, depth=.1, opt.lines = "col=2, lty=1 ,lwd=0.5")
答案 5 :(得分：0)
很晚的答案，但对于那些感兴趣的人，您可以使用 ggbrace 包在 ggplot2 中添加大括号。要安装和使用它，请检查下面的代码。您可以根据需要自定义括号，请参阅 ggbracegithub page。
devtools::install_github("NicolasH2/ggbrace")
library(ggbrace)
library(ggplot2)
ggplot() + geom_brace(aes(x=c(0,1), y=c(0,1)))
相关问题
最新问题
- 我写了这段代码，但我无法理解我的错误
- 我无法从一个代码实例的列表中删除 None 值，但我可以在另一个实例中。为什么它适用于一个细分市场而不适用于另一个细分市场？
- 是否有可能使 loadstring 不可能等于打印？卢阿
- java中的random.expovariate()
- Appscript 通过会议在 Google 日历中发送电子邮件和创建活动
- 为什么我的 Onclick 箭头功能在 React 中不起作用？
- 在此代码中是否有使用“this”的替代方法？
- 在 SQL Server 和 PostgreSQL 上查询，我如何从第一个表获得第二个表的可视化
- 每千个数字得到
- 更新了城市边界 KML 文件的来源？