我正在尝试使用Ubuntu 18.04映像在Docker容器中安装RabbitMQ，以对其运行单元测试。
要安装，我正在运行正常的sudo apt-get install rabbitmq-server，并且看来可以正常安装，但是当我尝试启动该服务或与该服务进行通信时，出现错误消息：
Error: unable to connect to node rabbit@b562da1810ce: nodedown
DIAGNOSTICS
===========
attempted to contact: [rabbit@b562da1810ce]
rabbit@b562da1810ce:
* connected to epmd (port 4369) on b562da1810ce
* epmd reports node 'rabbit' running on port 25672
* TCP connection succeeded but Erlang distribution failed
* Authentication failed (rejected by the remote node), please check the Erlang cookie
current node details:
- node name: 'rabbitmq-cli-69@b562da1810ce'
- home dir: /var/lib/rabbitmq
- cookie hash: YUZIPS6zyhfUBX5afdKGcw==
研究“请检查Erlang cookie”文本会给我带来大量的similar questions，似乎都不适用于Docker或我的情况。
我尝试删除~/.erlang.cookie，然后重新启动服务，并完全清除软件包并重新安装。什么都没做。
如何在Docker中运行RabbitMQ？
编辑：这是我的安装过程。
root@b562da1810ce:$ sudo apt-get purge -yq rabbitmq-server
Reading package lists...
Building dependency tree...
Reading state information...
The following packages were automatically installed and are no longer required:
erlang-asn1 erlang-base erlang-corba erlang-crypto erlang-diameter erlang-edoc erlang-eldap erlang-erl-docgen erlang-eunit erlang-ic erlang-inets erlang-mnesia erlang-nox erlang-odbc erlang-os-mon erlang-parsetools erlang-public-key erlang-runtime-tools erlang-snmp erlang-ssh
erlang-ssl erlang-syntax-tools erlang-tools erlang-xmerl libodbc1
Use 'sudo apt autoremove' to remove them.
The following packages will be REMOVED:
rabbitmq-server*
0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded.
After this operation, 5,678 kB disk space will be freed.
(Reading database ... 69832 files and directories currently installed.)
Removing rabbitmq-server (3.6.10-1) ...
invoke-rc.d: could not determine current runlevel
invoke-rc.d: policy-rc.d denied execution of stop.
(Reading database ... 69618 files and directories currently installed.)
Purging configuration files for rabbitmq-server (3.6.10-1) ...
Processing triggers for systemd (237-3ubuntu10.33) ...
root@b562da1810ce:$ rm -Rf /var/log/rabbitmq/*
root@b562da1810ce:$ sudo apt-get install -yq rabbitmq-server
Reading package lists...
Building dependency tree...
Reading state information...
The following NEW packages will be installed:
rabbitmq-server
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 4,625 kB of archives.
After this operation, 5,678 kB of additional disk space will be used.
Get:1 http://archive.ubuntu.com/ubuntu bionic/main amd64 rabbitmq-server all 3.6.10-1 [4,625 kB]
Fetched 4,625 kB in 4s (1,070 kB/s)
debconf: delaying package configuration, since apt-utils is not installed
Selecting previously unselected package rabbitmq-server.
(Reading database ... 69613 files and directories currently installed.)
Preparing to unpack .../rabbitmq-server_3.6.10-1_all.deb ...
Unpacking rabbitmq-server (3.6.10-1) ...
Setting up rabbitmq-server (3.6.10-1) ...
Created symlink /etc/systemd/system/multi-user.target.wants/rabbitmq-server.service → /lib/systemd/system/rabbitmq-server.service.
invoke-rc.d: could not determine current runlevel
invoke-rc.d: policy-rc.d denied execution of start.
Processing triggers for systemd (237-3ubuntu10.33) ...
root@b562da1810ce:$ sudo service rabbitmq-server status
Status of node rabbit@b562da1810ce
Error: unable to connect to node rabbit@b562da1810ce: nodedown
DIAGNOSTICS
===========
attempted to contact: [rabbit@b562da1810ce]
rabbit@b562da1810ce:
* connected to epmd (port 4369) on b562da1810ce
* epmd reports node 'rabbit' running on port 25672
* TCP connection succeeded but Erlang distribution failed
* Authentication failed (rejected by the remote node), please check the Erlang cookie
current node details:
- node name: 'rabbitmq-cli-30@b562da1810ce'
- home dir: /var/lib/rabbitmq
- cookie hash: DHe9O00f7sIHn/dTThKVVQ==
root@b562da1810ce:$ sudo service rabbitmq-server start
* Starting RabbitMQ Messaging Server rabbitmq-server * FAILED - check /var/log/rabbitmq/startup_\{log, _err\}
[fail]
root@b562da1810ce:$ sudo service rabbitmq-server status
Status of node rabbit@b562da1810ce
Error: unable to connect to node rabbit@b562da1810ce: nodedown
DIAGNOSTICS
===========
attempted to contact: [rabbit@b562da1810ce]
rabbit@b562da1810ce:
* connected to epmd (port 4369) on b562da1810ce
* epmd reports node 'rabbit' running on port 25672
* TCP connection succeeded but Erlang distribution failed
* Authentication failed (rejected by the remote node), please check the Erlang cookie
current node details:
- node name: 'rabbitmq-cli-13@b562da1810ce'
- home dir: /var/lib/rabbitmq
- cookie hash: DHe9O00f7sIHn/dTThKVVQ==
root@b562da1810ce:$ cat /var/log/rabbitmq/startup_err
root@b562da1810ce:$ cat /var/log/rabbitmq/startup_log
ERROR: node with name "rabbit" already running on "b562da1810ce"
基于日志的最后一行，我决定检查ps aux|grep -i rabbit，这表明Rabbit正在运行。然而service和rabbitmqctl均无法与其通信。为什么会这样？
答案 0 :(得分：0)
要么使用https://hub.docker.com//rabbitmq 中的官方docker镜像，要么可以使用https://hub.docker.com/ /rabbitmq
中的Dockerfile。# Alpine Linux is not officially supported by the RabbitMQ team -- use at your own risk!
FROM alpine:3.10
RUN apk add --no-cache \
# grab su-exec for easy step-down from root
'su-exec>=0.2' \
# bash for docker-entrypoint.sh
bash \
# "ps" for "rabbitmqctl wait" (https://github.com/docker-library/rabbitmq/issues/162)
procps
# Default to a PGP keyserver that pgp-happy-eyeballs recognizes, but allow for substitutions locally
ARG PGP_KEYSERVER=ha.pool.sks-keyservers.net
# If you are building this image locally and are getting `gpg: keyserver receive failed: No data` errors,
# run the build with a different PGP_KEYSERVER, e.g. docker build --tag rabbitmq:3.7 --build-arg PGP_KEYSERVER=pgpkeys.eu 3.7/ubuntu
# For context, see https://github.com/docker-library/official-images/issues/4252
# Using the latest OpenSSL LTS release, with support until September 2023 - https://www.openssl.org/source/
ENV OPENSSL_VERSION 1.1.1d
ENV OPENSSL_SOURCE_SHA256="1e3a91bc1f9dfce01af26026f856e064eab4c8ee0a8f457b5ae30b40b8b711f2"
# https://www.openssl.org/community/omc.html
ENV OPENSSL_PGP_KEY_IDS="0x8657ABB260F056B1E5190839D9C4D26D0E604491 0x5B2545DAB21995F4088CEFAA36CEE4DEB00CFE33 0xED230BEC4D4F2518B9D7DF41F0DB4D21C1D35231 0xC1F33DD8CE1D4CC613AF14DA9195C48241FBF7DD 0x7953AC1FBC3DC8B3B292393ED5E9E43F7DF9EE8C 0xE5E52560DD91C556DDBDA5D02064C53641C25E5D"
# Use the latest stable Erlang/OTP release (https://github.com/erlang/otp/tags)
ENV OTP_VERSION 22.1.8
# TODO add PGP checking when the feature will be added to Erlang/OTP's build system
# http://erlang.org/pipermail/erlang-questions/2019-January/097067.html
ENV OTP_SOURCE_SHA256="7302be70cee2c33689bf2c2a3e7cfee597415d0fb3e4e71bd3e86bd1eff9cfdc"
# Install dependencies required to build Erlang/OTP from source
# http://erlang.org/doc/installation_guide/INSTALL.html
# autoconf: Required to configure Erlang/OTP before compiling
# dpkg-dev: Required to set up host & build type when compiling Erlang/OTP
# gnupg: Required to verify OpenSSL artefacts
# libncurses5-dev: Required for Erlang/OTP new shell & observer_cli - https://github.com/zhongwencool/observer_cli
RUN set -eux; \
\
apk add --no-cache --virtual .build-deps \
autoconf \
ca-certificates \
dpkg-dev dpkg \
gcc \
gnupg \
libc-dev \
linux-headers \
make \
ncurses-dev \
; \
\
OPENSSL_SOURCE_URL="https://www.openssl.org/source/openssl-$OPENSSL_VERSION.tar.gz"; \
OPENSSL_PATH="/usr/local/src/openssl-$OPENSSL_VERSION"; \
OPENSSL_CONFIG_DIR=/usr/local/etc/ssl; \
\
# /usr/local/src doesn't exist in Alpine by default
mkdir /usr/local/src; \
\
# Required by the crypto & ssl Erlang/OTP applications
wget --output-document "$OPENSSL_PATH.tar.gz.asc" "$OPENSSL_SOURCE_URL.asc"; \
wget --output-document "$OPENSSL_PATH.tar.gz" "$OPENSSL_SOURCE_URL"; \
export GNUPGHOME="$(mktemp -d)"; \
for key in $OPENSSL_PGP_KEY_IDS; do \
gpg --batch --keyserver "$PGP_KEYSERVER" --recv-keys "$key"; \
done; \
gpg --batch --verify "$OPENSSL_PATH.tar.gz.asc" "$OPENSSL_PATH.tar.gz"; \
gpgconf --kill all; \
rm -rf "$GNUPGHOME"; \
echo "$OPENSSL_SOURCE_SHA256 *$OPENSSL_PATH.tar.gz" | sha256sum -c -; \
mkdir -p "$OPENSSL_PATH"; \
tar --extract --file "$OPENSSL_PATH.tar.gz" --directory "$OPENSSL_PATH" --strip-components 1; \
\
# Configure OpenSSL for compilation
cd "$OPENSSL_PATH"; \
# OpenSSL's "config" script uses a lot of "uname"-based target detection...
MACHINE="$(dpkg-architecture --query DEB_BUILD_GNU_CPU)" \
RELEASE="4.x.y-z" \
SYSTEM='Linux' \
BUILD='???' \
./config \
--openssldir="$OPENSSL_CONFIG_DIR" \
# add -rpath to avoid conflicts between our OpenSSL's "libssl.so" and the libssl package by making sure /usr/local/lib is searched first (but only for Erlang/OpenSSL to avoid issues with other tools using libssl; https://github.com/docker-library/rabbitmq/issues/364)
-Wl,-rpath=/usr/local/lib \
; \
# Compile, install OpenSSL, verify that the command-line works & development headers are present
make -j "$(getconf _NPROCESSORS_ONLN)"; \
make install_sw install_ssldirs; \
cd ..; \
rm -rf "$OPENSSL_PATH"*; \
# use Alpine's CA certificates
rmdir "$OPENSSL_CONFIG_DIR/certs" "$OPENSSL_CONFIG_DIR/private"; \
ln -sf /etc/ssl/certs /etc/ssl/private "$OPENSSL_CONFIG_DIR"; \
# smoke test
openssl version; \
\
OTP_SOURCE_URL="https://github.com/erlang/otp/archive/OTP-$OTP_VERSION.tar.gz"; \
OTP_PATH="/usr/local/src/otp-$OTP_VERSION"; \
\
# Download, verify & extract OTP_SOURCE
mkdir -p "$OTP_PATH"; \
wget --output-document "$OTP_PATH.tar.gz" "$OTP_SOURCE_URL"; \
echo "$OTP_SOURCE_SHA256 *$OTP_PATH.tar.gz" | sha256sum -c -; \
tar --extract --file "$OTP_PATH.tar.gz" --directory "$OTP_PATH" --strip-components 1; \
\
# Configure Erlang/OTP for compilation, disable unused features & applications
# http://erlang.org/doc/applications.html
# ERL_TOP is required for Erlang/OTP makefiles to find the absolute path for the installation
cd "$OTP_PATH"; \
export ERL_TOP="$OTP_PATH"; \
./otp_build autoconf; \
export CFLAGS='-g -O2'; \
# add -rpath to avoid conflicts between our OpenSSL's "libssl.so" and the libssl package by making sure /usr/local/lib is searched first (but only for Erlang/OpenSSL to avoid issues with other tools using libssl; https://github.com/docker-library/rabbitmq/issues/364)
export CFLAGS="$CFLAGS -Wl,-rpath=/usr/local/lib"; \
hostArch="$(dpkg-architecture --query DEB_HOST_GNU_TYPE)"; \
buildArch="$(dpkg-architecture --query DEB_BUILD_GNU_TYPE)"; \
dpkgArch="$(dpkg --print-architecture)"; dpkgArch="${dpkgArch##*-}"; \
./configure \
--host="$hostArch" \
--build="$buildArch" \
--disable-dynamic-ssl-lib \
--disable-hipe \
--disable-sctp \
--disable-silent-rules \
--enable-clock-gettime \
--enable-hybrid-heap \
--enable-kernel-poll \
--enable-shared-zlib \
--enable-smp-support \
--enable-threads \
--with-microstate-accounting=extra \
--without-common_test \
--without-debugger \
--without-dialyzer \
--without-diameter \
--without-edoc \
--without-erl_docgen \
--without-erl_interface \
--without-et \
--without-eunit \
--without-ftp \
--without-hipe \
--without-jinterface \
--without-megaco \
--without-observer \
--without-odbc \
--without-reltool \
--without-ssh \
--without-tftp \
--without-wx \
; \
# Compile & install Erlang/OTP
make -j "$(getconf _NPROCESSORS_ONLN)" GEN_OPT_FLGS="-O2 -fno-strict-aliasing"; \
make install; \
cd ..; \
rm -rf \
"$OTP_PATH"* \
/usr/local/lib/erlang/lib/*/examples \
/usr/local/lib/erlang/lib/*/src \
; \
\
runDeps="$( \
scanelf --needed --nobanner --format '%n#p' --recursive /usr/local \
| tr ',' '\n' \
| sort -u \
| awk 'system("[ -e /usr/local/lib/" $1 " ]") == 0 { next } { print "so:" $1 }' \
)"; \
apk add --no-cache --virtual .otp-run-deps $runDeps; \
apk del --no-network .build-deps; \
\
# Check that OpenSSL still works after purging build dependencies
openssl version; \
# Check that Erlang/OTP crypto & ssl were compiled against OpenSSL correctly
erl -noshell -eval 'io:format("~p~n~n~p~n~n", [crypto:supports(), ssl:versions()]), init:stop().'
ENV RABBITMQ_DATA_DIR=/var/lib/rabbitmq
# Create rabbitmq system user & group, fix permissions & allow root user to connect to the RabbitMQ Erlang VM
RUN set -eux; \
addgroup -g 101 -S rabbitmq; \
adduser -u 100 -S -h "$RABBITMQ_DATA_DIR" -G rabbitmq rabbitmq; \
mkdir -p "$RABBITMQ_DATA_DIR" /etc/rabbitmq /tmp/rabbitmq-ssl /var/log/rabbitmq; \
chown -fR rabbitmq:rabbitmq "$RABBITMQ_DATA_DIR" /etc/rabbitmq /tmp/rabbitmq-ssl /var/log/rabbitmq; \
chmod 777 "$RABBITMQ_DATA_DIR" /etc/rabbitmq /tmp/rabbitmq-ssl /var/log/rabbitmq; \
ln -sf "$RABBITMQ_DATA_DIR/.erlang.cookie" /root/.erlang.cookie
# Use the latest stable RabbitMQ release (https://www.rabbitmq.com/download.html)
ENV RABBITMQ_VERSION 3.7.23-rc.1
# https://www.rabbitmq.com/signatures.html#importing-gpg
ENV RABBITMQ_PGP_KEY_ID="0x0A9AF2115F4687BD29803A206B73A36E6026DFCA"
ENV RABBITMQ_HOME=/opt/rabbitmq
# Add RabbitMQ to PATH, send all logs to TTY
ENV PATH=$RABBITMQ_HOME/sbin:$PATH \
RABBITMQ_LOGS=- RABBITMQ_SASL_LOGS=-
# Install RabbitMQ
RUN set -eux; \
\
apk add --no-cache --virtual .build-deps \
ca-certificates \
gnupg \
xz \
; \
\
RABBITMQ_SOURCE_URL="https://github.com/rabbitmq/rabbitmq-server/releases/download/v$RABBITMQ_VERSION/rabbitmq-server-generic-unix-latest-toolchain-$RABBITMQ_VERSION.tar.xz"; \
RABBITMQ_PATH="/usr/local/src/rabbitmq-$RABBITMQ_VERSION"; \
\
wget --output-document "$RABBITMQ_PATH.tar.xz.asc" "$RABBITMQ_SOURCE_URL.asc"; \
wget --output-document "$RABBITMQ_PATH.tar.xz" "$RABBITMQ_SOURCE_URL"; \
\
export GNUPGHOME="$(mktemp -d)"; \
gpg --batch --keyserver hkps://keys.openpgp.org --recv-keys "$RABBITMQ_PGP_KEY_ID"; \
gpg --batch --verify "$RABBITMQ_PATH.tar.xz.asc" "$RABBITMQ_PATH.tar.xz"; \
gpgconf --kill all; \
rm -rf "$GNUPGHOME"; \
\
mkdir -p "$RABBITMQ_HOME"; \
tar --extract --file "$RABBITMQ_PATH.tar.xz" --directory "$RABBITMQ_HOME" --strip-components 1; \
rm -rf "$RABBITMQ_PATH"*; \
# Do not default SYS_PREFIX to RABBITMQ_HOME, leave it empty
grep -qE '^SYS_PREFIX=\$\{RABBITMQ_HOME\}$' "$RABBITMQ_HOME/sbin/rabbitmq-defaults"; \
sed -i 's/^SYS_PREFIX=.*$/SYS_PREFIX=/' "$RABBITMQ_HOME/sbin/rabbitmq-defaults"; \
grep -qE '^SYS_PREFIX=$' "$RABBITMQ_HOME/sbin/rabbitmq-defaults"; \
chown -R rabbitmq:rabbitmq "$RABBITMQ_HOME"; \
\
apk del .build-deps; \
\
# verify assumption of no stale cookies
[ ! -e "$RABBITMQ_DATA_DIR/.erlang.cookie" ]; \
# Ensure RabbitMQ was installed correctly by running a few commands that do not depend on a running server, as the rabbitmq user
# If they all succeed, it's safe to assume that things have been set up correctly
su-exec rabbitmq rabbitmqctl help; \
su-exec rabbitmq rabbitmqctl list_ciphers; \
su-exec rabbitmq rabbitmq-plugins list; \
# no stale cookies
rm "$RABBITMQ_DATA_DIR/.erlang.cookie"
# Added for backwards compatibility - users can simply COPY custom plugins to /plugins
RUN ln -sf /opt/rabbitmq/plugins /plugins
# set home so that any `--user` knows where to put the erlang cookie
ENV HOME $RABBITMQ_DATA_DIR
# Hint that the data (a.k.a. home dir) dir should be separate volume
VOLUME $RABBITMQ_DATA_DIR
# warning: the VM is running with native name encoding of latin1 which may cause Elixir to malfunction as it expects utf8. Please ensure your locale is set to UTF-8 (which can be verified by running "locale" in your shell)
# Setting all environment variables that control language preferences, behaviour differs - https://www.gnu.org/software/gettext/manual/html_node/The-LANGUAGE-variable.html#The-LANGUAGE-variable
# https://docs.docker.com/samples/library/ubuntu/#locales
ENV LANG=C.UTF-8 LANGUAGE=C.UTF-8 LC_ALL=C.UTF-8
COPY docker-entrypoint.sh /usr/local/bin/
ENTRYPOINT ["docker-entrypoint.sh"]
EXPOSE 4369 5671 5672 25672
CMD ["rabbitmq-server"]
使用命令构建容器（点号是在当前目录中找到Dockerfile）。
docker build .
一旦构建了映像，则可以使用以下命令启动容器
docker container start youtImageName