如何为python安装face_recognition模块

时间:2019-06-21 04:41:01

标签: python cmake pip dlib

我已经安装了cmake,但仍然没有安装dlib,这是安装face_recognition模块所必需的

每当我尝试使用pip install dlib安装dlib时,都会出现以下错误

ERROR: Complete output from command 'c:\users\sunil\appdata\local\programs\python\python37\python.exe' -u -c 'import setuptools, tokenize;__file__='"'"'C:\\Users\\sunil\\AppData\\Local\\Temp\\pip-install-oufh_gcl\\dlib\\setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' bdist_wheel -d 'C:\Users\sunil\AppData\Local\Temp\pip-wheel-2fd_0qt9' --python-tag cp37:
  ERROR: running bdist_wheel
  running build
  running build_py
  package init file 'dlib\__init__.py' not found (or not a regular file)
  running build_ext
  Building extension for Python 3.7.0 (v3.7.0:1bf9cc5093, Jun 27 2018, 04:59:51) [MSC v.1914 64 bit (AMD64)]
  Invoking CMake setup: 'cmake C:\Users\sunil\AppData\Local\Temp\pip-install-oufh_gcl\dlib\tools\python -DCMAKE_LIBRARY_OUTPUT_DIRECTORY=C:\Users\sunil\AppData\Local\Temp\pip-install-oufh_gcl\dlib\build\lib.win-amd64-3.7 -DPYTHON_EXECUTABLE=c:\users\sunil\appdata\local\programs\python\python37\python.exe -DCMAKE_LIBRARY_OUTPUT_DIRECTORY_RELEASE=C:\Users\sunil\AppData\Local\Temp\pip-install-oufh_gcl\dlib\build\lib.win-amd64-3.7 -A x64'
  -- Building for: NMake Makefiles
  CMake Error in CMakeLists.txt:
    Generator

      NMake Makefiles

    does not support platform specification, but platform

      x64

    was specified.


  CMake Error: CMAKE_C_COMPILER not set, after EnableLanguage
  CMake Error: CMAKE_CXX_COMPILER not set, after EnableLanguage
  -- Configuring incomplete, errors occurred!
  See also "C:/Users/sunil/AppData/Local/Temp/pip-install-oufh_gcl/dlib/build/temp.win-amd64-3.7/Release/CMakeFiles/CMakeOutput.log".
  Traceback (most recent call last):
    File "<string>", line 1, in <module>
    File "C:\Users\sunil\AppData\Local\Temp\pip-install-oufh_gcl\dlib\setup.py", line 261, in <module>
      'Topic :: Software Development',
    File "c:\users\sunil\appdata\local\programs\python\python37\lib\site-packages\setuptools\__init__.py", line 129, in setup
      return distutils.core.setup(**attrs)
    File "c:\users\sunil\appdata\local\programs\python\python37\lib\distutils\core.py", line 148, in setup
      dist.run_commands()
    File "c:\users\sunil\appdata\local\programs\python\python37\lib\distutils\dist.py", line 966, in run_commands
      self.run_command(cmd)
    File "c:\users\sunil\appdata\local\programs\python\python37\lib\distutils\dist.py", line 985, in run_command
      cmd_obj.run()
    File "c:\users\sunil\appdata\local\programs\python\python37\lib\site-packages\wheel\bdist_wheel.py", line 192, in run
      self.run_command('build')
    File "c:\users\sunil\appdata\local\programs\python\python37\lib\distutils\cmd.py", line 313, in run_command
      self.distribution.run_command(command)
    File "c:\users\sunil\appdata\local\programs\python\python37\lib\distutils\dist.py", line 985, in run_command
      cmd_obj.run()
    File "c:\users\sunil\appdata\local\programs\python\python37\lib\distutils\command\build.py", line 135, in run
      self.run_command(cmd_name)
    File "c:\users\sunil\appdata\local\programs\python\python37\lib\distutils\cmd.py", line 313, in run_command
      self.distribution.run_command(command)
    File "c:\users\sunil\appdata\local\programs\python\python37\lib\distutils\dist.py", line 985, in run_command
      cmd_obj.run()
    File "C:\Users\sunil\AppData\Local\Temp\pip-install-oufh_gcl\dlib\setup.py", line 135, in run
      self.build_extension(ext)
    File "C:\Users\sunil\AppData\Local\Temp\pip-install-oufh_gcl\dlib\setup.py", line 172, in build_extension
      subprocess.check_call(cmake_setup, cwd=build_folder)
    File "c:\users\sunil\appdata\local\programs\python\python37\lib\subprocess.py", line 328, in check_call
      raise CalledProcessError(retcode, cmd)
  subprocess.CalledProcessError: Command '['cmake', 'C:\\Users\\sunil\\AppData\\Local\\Temp\\pip-install-oufh_gcl\\dlib\\tools\\python', '-DCMAKE_LIBRARY_OUTPUT_DIRECTORY=C:\\Users\\sunil\\AppData\\Local\\Temp\\pip-install-oufh_gcl\\dlib\\build\\lib.win-amd64-3.7', '-DPYTHON_EXECUTABLE=c:\\users\\sunil\\appdata\\local\\programs\\python\\python37\\python.exe', '-DCMAKE_LIBRARY_OUTPUT_DIRECTORY_RELEASE=C:\\Users\\sunil\\AppData\\Local\\Temp\\pip-install-oufh_gcl\\dlib\\build\\lib.win-amd64-3.7', '-A', 'x64']' returned non-zero exit status 1.
  ----------------------------------------
  ERROR: Failed building wheel for dlib
  Running setup.py clean for dlib
Failed to build dlib
Installing collected packages: dlib
  Running setup.py install for dlib ... error
    ERROR: Complete output from command 'c:\users\sunil\appdata\local\programs\python\python37\python.exe' -u -c 'import setuptools, tokenize;__file__='"'"'C:\\Users\\sunil\\AppData\\Local\\Temp\\pip-install-oufh_gcl\\dlib\\setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record 'C:\Users\sunil\AppData\Local\Temp\pip-record-89jcoq15\install-record.txt' --single-version-externally-managed --compile:
    ERROR: running install
    running build
    running build_py
    package init file 'dlib\__init__.py' not found (or not a regular file)
    running build_ext
    Building extension for Python 3.7.0 (v3.7.0:1bf9cc5093, Jun 27 2018, 04:59:51) [MSC v.1914 64 bit (AMD64)]
    Invoking CMake setup: 'cmake C:\Users\sunil\AppData\Local\Temp\pip-install-oufh_gcl\dlib\tools\python -DCMAKE_LIBRARY_OUTPUT_DIRECTORY=C:\Users\sunil\AppData\Local\Temp\pip-install-oufh_gcl\dlib\build\lib.win-amd64-3.7 -DPYTHON_EXECUTABLE=c:\users\sunil\appdata\local\programs\python\python37\python.exe -DCMAKE_LIBRARY_OUTPUT_DIRECTORY_RELEASE=C:\Users\sunil\AppData\Local\Temp\pip-install-oufh_gcl\dlib\build\lib.win-amd64-3.7 -A x64'
    -- Building for: NMake Makefiles
    CMake Error in CMakeLists.txt:
      Generator

        NMake Makefiles

      does not support platform specification, but platform

        x64

      was specified.


    CMake Error: CMAKE_C_COMPILER not set, after EnableLanguage
    CMake Error: CMAKE_CXX_COMPILER not set, after EnableLanguage
    -- Configuring incomplete, errors occurred!
    See also "C:/Users/sunil/AppData/Local/Temp/pip-install-oufh_gcl/dlib/build/temp.win-amd64-3.7/Release/CMakeFiles/CMakeOutput.log".
    Traceback (most recent call last):
      File "<string>", line 1, in <module>
      File "C:\Users\sunil\AppData\Local\Temp\pip-install-oufh_gcl\dlib\setup.py", line 261, in <module>
        'Topic :: Software Development',
      File "c:\users\sunil\appdata\local\programs\python\python37\lib\site-packages\setuptools\__init__.py", line 129, in setup
        return distutils.core.setup(**attrs)
      File "c:\users\sunil\appdata\local\programs\python\python37\lib\distutils\core.py", line 148, in setup
        dist.run_commands()
      File "c:\users\sunil\appdata\local\programs\python\python37\lib\distutils\dist.py", line 966, in run_commands
        self.run_command(cmd)
      File "c:\users\sunil\appdata\local\programs\python\python37\lib\distutils\dist.py", line 985, in run_command
        cmd_obj.run()
      File "c:\users\sunil\appdata\local\programs\python\python37\lib\site-packages\setuptools\command\install.py", line 61, in run
        return orig.install.run(self)
      File "c:\users\sunil\appdata\local\programs\python\python37\lib\distutils\command\install.py", line 545, in run
        self.run_command('build')
      File "c:\users\sunil\appdata\local\programs\python\python37\lib\distutils\cmd.py", line 313, in run_command
        self.distribution.run_command(command)
      File "c:\users\sunil\appdata\local\programs\python\python37\lib\distutils\dist.py", line 985, in run_command
        cmd_obj.run()
      File "c:\users\sunil\appdata\local\programs\python\python37\lib\distutils\command\build.py", line 135, in run
        self.run_command(cmd_name)
      File "c:\users\sunil\appdata\local\programs\python\python37\lib\distutils\cmd.py", line 313, in run_command
        self.distribution.run_command(command)
      File "c:\users\sunil\appdata\local\programs\python\python37\lib\distutils\dist.py", line 985, in run_command
        cmd_obj.run()
      File "C:\Users\sunil\AppData\Local\Temp\pip-install-oufh_gcl\dlib\setup.py", line 135, in run
        self.build_extension(ext)
      File "C:\Users\sunil\AppData\Local\Temp\pip-install-oufh_gcl\dlib\setup.py", line 172, in build_extension
        subprocess.check_call(cmake_setup, cwd=build_folder)
      File "c:\users\sunil\appdata\local\programs\python\python37\lib\subprocess.py", line 328, in check_call
        raise CalledProcessError(retcode, cmd)
    subprocess.CalledProcessError: Command '['cmake', 'C:\\Users\\sunil\\AppData\\Local\\Temp\\pip-install-oufh_gcl\\dlib\\tools\\python', '-DCMAKE_LIBRARY_OUTPUT_DIRECTORY=C:\\Users\\sunil\\AppData\\Local\\Temp\\pip-install-oufh_gcl\\dlib\\build\\lib.win-amd64-3.7', '-DPYTHON_EXECUTABLE=c:\\users\\sunil\\appdata\\local\\programs\\python\\python37\\python.exe', '-DCMAKE_LIBRARY_OUTPUT_DIRECTORY_RELEASE=C:\\Users\\sunil\\AppData\\Local\\Temp\\pip-install-oufh_gcl\\dlib\\build\\lib.win-amd64-3.7', '-A', 'x64']' returned non-zero exit status 1.
    ----------------------------------------
ERROR: Command "'c:\users\sunil\appdata\local\programs\python\python37\python.exe' -u -c 'import setuptools, tokenize;__file__='"'"'C:\\Users\\sunil\\AppData\\Local\\Temp\\pip-install-oufh_gcl\\dlib\\setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record 'C:\Users\sunil\AppData\Local\Temp\pip-record-89jcoq15\install-record.txt' --single-version-externally-managed --compile" failed with error code 1 in C:\Users\sunil\AppData\Local\Temp\pip-install-oufh_gcl\dlib\

谁能告诉我为Windows 10安装face_recognition模块的最简单方法

5 个答案:

答案 0 :(得分:2)

首先,安装Cmake。

pip install cmake

然后,安装dlib。

如果pip无效,请通过wheel文件安装dlib。

pip install https://pypi.python.org/packages/da/06/bd3e241c4eb0a662914b3b4875fc52dd176a9db0d4a2c915ac2ad8800e9e/dlib-19.7.0-cp36-cp36m-win_amd64.whl#md5=b7330a5b2d46420343fbed5df69e6a3f

之后,您可以安装face_regognition模块。

pip install face_recognition

答案 1 :(得分:1)

如果您的系统中已安装conda,请按照以下步骤操作:

  • conda create -n py36 python = 3.6
  • 激活py36
  • conda config-添加通道conda-forge
  • conda安装numpy
  • conda install scipy
  • conda安装dlib
  • pip安装-不依赖face_recognition

答案 2 :(得分:0)

如果您的操作系统是Windows7:

  1. 下载并安装dlib.whl x64或x86
  2. 下载并安装cmake应用程序并将其添加到路径
  3. 点安装cmake
  4. 仅在带有“ .whl”文件的python 3.6至3.7上pip安装dlib
  5. pip install face_recognotion

享受face_recognition

答案 3 :(得分:0)

我的环境详情:

<块引用>

python 3.7 & Ubuntu 16.04


1) 分配root权限,先更新ubuntu

sudo su
apt-get update

2) 检查 Python 和 pip 的版本和路径。

which python3

python3 -V

which pip3

pip3 -V

3)

pip3 install cmake

4)

apt-get install -y --fix-missing \
    build-essential \
    cmake \
    gfortran \
    git \
    wget \
    curl \
    grapgicsmagick \
    libgraphicsmagic-dev \
    libatlas-dev \
    libavcodec-dev \
    libavformat-dev \
    libgtk2.0-dev \
    libjpeg-dev \
    liblapack-dev \
    libswscale-dev \
    pkg-config \
    software-properties-common \
    zip

6)

apt-get install python3-dev

5)

pip3 install dlib

6)

pip3 install face_recognition

✅完成

答案 4 :(得分:-1)

使用以下命令安装Cmake:

sudo apt install cmake

对于python3,不要单独使用pip,请使用pip3安装将来的python3模块:

pip3 install face_recognition