我正在使用D-ITG从我的ryu应用程序中获取日志。在这种情况下，我确实使用了一个主机（叫他H2）来执行ITGRecv，并使用了两个主机（分别叫它们H1和H3）来同时执行ITGSend到H2。生成了两个recv日志（十次）。 H1日志描述了H1和H3流量的数据，并且在H3日志上也描述了两个数据，但是，两个数据是不同的。
第一个日志：
ITGDec version 2.8.1 (r1023)
Compile-time options: bursty multiport
----------------------------------------------------------
Flow number: 1
From 10.0.0.1:41975
To 10.0.0.2:8999
----------------------------------------------------------
Total time = 14.911133 s
Total packets = 140
Minimum delay = 0.070717 s
Maximum delay = 0.344897 s
Average delay = 0.084809 s
Average jitter = 0.010502 s
Delay standard deviation = 0.025819 s
Bytes received = 14000
Average bitrate = 7.511166 Kbit/s
Average packet rate = 9.388958 pkt/s
Packets dropped = 5 (3.45 %)
Average loss-burst size = 1.250000 pkt
----------------------------------------------------------
----------------------------------------------------------
Flow number: 1
From 10.0.0.3:52612
To 10.0.0.2:8999
----------------------------------------------------------
Total time = 0.111478 s
Total packets = 2
Minimum delay = 0.116813 s
Maximum delay = 0.127096 s
Average delay = 0.121954 s
Average jitter = 0.010283 s
Delay standard deviation = 0.005142 s
Bytes received = 200
Average bitrate = 14.352608 Kbit/s
Average packet rate = 17.940760 pkt/s
Packets dropped = 35 (94.59 %)
Average loss-burst size = 35.000000 pkt
----------------------------------------------------------
__________________________________________________________
**************** TOTAL RESULTS ******************
__________________________________________________________
Number of flows = 2
Total time = 14.911133 s
Total packets = 142
Minimum delay = 0.070717 s
Maximum delay = 0.344897 s
Average delay = 0.085333 s
Average jitter = 0.010361 s
Delay standard deviation = 0.026014 s
Bytes received = 14200
Average bitrate = 7.618469 Kbit/s
Average packet rate = 9.523086 pkt/s
Packets dropped = 40 (21.98 %)
Average loss-burst size = 8.000000 pkt
Error lines = 0
----------------------------------------------------------
H3日志：
ITGDec version 2.8.1 (r1023)
Compile-time options: bursty multiport
----------------------------------------------------------
Flow number: 1
From 10.0.0.1:41975
To 10.0.0.2:8999
----------------------------------------------------------
Total time = 4.622993 s
Total packets = 5
Minimum delay = 0.074256 s
Maximum delay = 0.136804 s
Average delay = 0.090915 s
Average jitter = 0.016401 s
Delay standard deviation = 0.023996 s
Bytes received = 500
Average bitrate = 0.865240 Kbit/s
Average packet rate = 1.081550 pkt/s
Packets dropped = 52 (91.23 %)
Average loss-burst size = 17.333333 pkt
----------------------------------------------------------
----------------------------------------------------------
Flow number: 1
From 10.0.0.3:52612
To 10.0.0.2:8999
----------------------------------------------------------
Total time = 14.947795 s
Total packets = 139
Minimum delay = 0.111520 s
Maximum delay = 0.436838 s
Average delay = 0.136520 s
Average jitter = 0.014083 s
Delay standard deviation = 0.041885 s
Bytes received = 13900
Average bitrate = 7.439224 Kbit/s
Average packet rate = 9.299030 pkt/s
Packets dropped = 7 (4.79 %)
Average loss-burst size = 1.166667 pkt
----------------------------------------------------------
__________________________________________________________
**************** TOTAL RESULTS ******************
__________________________________________________________
Number of flows = 2
Total time = 15.260303 s
Total packets = 144
Minimum delay = 0.074256 s
Maximum delay = 0.436838 s
Average delay = 0.134936 s
Average jitter = 0.015333 s
Delay standard deviation = 0.042227 s
Bytes received = 14400
Average bitrate = 7.548998 Kbit/s
Average packet rate = 9.436248 pkt/s
Packets dropped = 59 (29.06 %)
Average loss-burst size = 6.555556 pkt
Error lines = 0
----------------------------------------------------------
预先感谢！