我正在将wddk7 ndis驱动程序迁移到wddk10。安装后，setupapi.dev.log显示一些错误，如下所示：
dvi: Existing files modified, may need to restart related services.
sto: {Configure Driver Package: exit(0x00000bc3)}
dvi: Restart required for any devices using this driver.
dvi: Install Device: Configuring device (oem23.inf:usb\vid_271f&pid_6700&rev_0100,NusbWifi.ndi.NT). 18:03:55.323
dvi: Install Device: Configuring device completed. 18:03:55.333
dvi: Device Status: 0x01806000, Problem: 0x0 (0x00000000)
dvi: {Restarting Devices} 18:03:55.393
dvi: Start: USB\VID_271F&PID_6700\FASTBOOT
dvi: Device pending start: Device has problem: 0x38 (CM_PROB_NEED_CLASS_CONFIG), problem status: 0x00000000.
dvi: {Restarting Devices exit} 18:03:55.810
dvi: {Configure Device - exit(0x00000000)} 18:03:55.810
dvi: Device Status: 0x01806400, Problem: 0x38
dvi: {Install Device - exit(0x00000000)} 18:03:55.810
dvi: {Core Device Install - exit(0x00000000)} 18:03:55.810
dvi: Waiting for device post-install to complete. 18:03:55.810
dvi: Device post-install completed. 18:03:55.980
dvi: Device post-install problem: 0x30 (0xC000036B)
ump: {Plug and Play Service: Device Install exit(00000000)}
ndv: {Install Related Drivers} 18:03:55.980
ndv: {Install Related Drivers: exit(0x00000000)} 18:03:55.980
dvi: {DIF_NEWDEVICEWIZARD_FINISHINSTALL} 18:03:55.990
dvi: Default installer: Enter 18:03:55.990
dvi: Default installer: Exit
dvi: {DIF_NEWDEVICEWIZARD_FINISHINSTALL - exit(0xe000020e)} 18:03:55.990
ndv: {Update Driver Software Wizard exit(00000000)}
我已经搜索了"CM_PROB_NEED_CLASS_CONFIG"和"Device Status: 0x01806400, Problem: 0x38"。但是在Microsoft网站上没有任何帮助。
我在inf或代码中错过了什么配置？