Question

我们已配置为通过CRM门户网站并使用自定义策略来达到B2C。从本地帐户的登录重定向回CRM时，出现以下错误

“ /”应用程序中的服务器错误。值不能为空。参数名称：email

那么，为什么要弄清楚为什么不将电子邮件作为索偿发送呢？

1）我们如何找出所有从B2C发送回CRM的索赔？

2）我们的SignupOrSignin.xml具有以下内容

  <OutputClaims>
    <OutputClaim ClaimTypeReferenceId="displayName" />
    <OutputClaim ClaimTypeReferenceId="givenName" />
    <OutputClaim ClaimTypeReferenceId="surname" />
    <OutputClaim ClaimTypeReferenceId="email" />
    <OutputClaim ClaimTypeReferenceId="objectId" PartnerClaimType="sub"/>
    <OutputClaim ClaimTypeReferenceId="identityProvider" />
    <OutputClaim ClaimTypeReferenceId="trustFrameworkPolicy" Required="true" DefaultValue="{policy}" />
  </OutputClaims>

因此我们假设电子邮件已被发送回，但当然不是。

用户旅程中可能有什么问题？

<UserJourney Id="SignUpOrSignIn">
  <OrchestrationSteps>

    <OrchestrationStep Order="1" Type="CombinedSignInAndSignUp" ContentDefinitionReferenceId="api.signuporsignin">
      <ClaimsProviderSelections>
        <ClaimsProviderSelection ValidationClaimsExchangeId="LocalAccountSigninEmailExchange" />
      </ClaimsProviderSelections>
      <ClaimsExchanges>
        <ClaimsExchange Id="LocalAccountSigninEmailExchange" TechnicalProfileReferenceId="SelfAsserted-LocalAccountSignin-Email" />
      </ClaimsExchanges>
    </OrchestrationStep>

    <OrchestrationStep Order="2" Type="ClaimsExchange">
      <Preconditions>
        <Precondition Type="ClaimsExist" ExecuteActionsIf="true">
          <Value>objectId</Value>
          <Action>SkipThisOrchestrationStep</Action>
        </Precondition>
      </Preconditions>
      <ClaimsExchanges>
       <ClaimsExchange Id="FacebookExchange" TechnicalProfileReferenceId="Facebook-OAUTH" />
        <ClaimsExchange Id="SignUpWithLogonEmailExchange" TechnicalProfileReferenceId="LocalAccountSignUpWithLogonEmail" />
      </ClaimsExchanges>
    </OrchestrationStep>

    <!-- For social IDP authentication, attempt to find the user account in the directory. -->
    <OrchestrationStep Order="3" Type="ClaimsExchange">
      <Preconditions>
        <Precondition Type="ClaimEquals" ExecuteActionsIf="true">
          <Value>authenticationSource</Value>
          <Value>localAccountAuthentication</Value>
          <Action>SkipThisOrchestrationStep</Action>
        </Precondition>
      </Preconditions>
      <ClaimsExchanges>
        <ClaimsExchange Id="AADUserReadUsingAlternativeSecurityId" TechnicalProfileReferenceId="AAD-UserReadUsingAlternativeSecurityId-NoError" />
      </ClaimsExchanges>
    </OrchestrationStep>

    <!-- Show self-asserted page only if the directory does not have the user account already (i.e. we do not have an objectId). 
      This can only happen when authentication happened using a social IDP. If local account was created or authentication done
      using ESTS in step 2, then an user account must exist in the directory by this time. -->
    <OrchestrationStep Order="4" Type="ClaimsExchange">
      <Preconditions>
        <Precondition Type="ClaimsExist" ExecuteActionsIf="true">
          <Value>objectId</Value>
          <Action>SkipThisOrchestrationStep</Action>
        </Precondition>
      </Preconditions>
      <ClaimsExchanges>
        <ClaimsExchange Id="SelfAsserted-Social" TechnicalProfileReferenceId="SelfAsserted-Social" />
      </ClaimsExchanges>
    </OrchestrationStep>

    <!-- This step reads any user attributes that we may not have received when authenticating using ESTS so they can be sent 
      in the token. -->
    <OrchestrationStep Order="5" Type="ClaimsExchange">
      <Preconditions>
        <Precondition Type="ClaimEquals" ExecuteActionsIf="true">
          <Value>authenticationSource</Value>
          <Value>socialIdpAuthentication</Value>
          <Action>SkipThisOrchestrationStep</Action>
        </Precondition>
      </Preconditions>
      <ClaimsExchanges>
        <ClaimsExchange Id="AADUserReadWithObjectId" TechnicalProfileReferenceId="AAD-UserReadUsingObjectId" />
      </ClaimsExchanges>
    </OrchestrationStep>



    <!-- The previous step (SelfAsserted-Social) could have been skipped if there were no attributes to collect 
         from the user. So, in that case, create the user in the directory if one does not already exist 
         (verified using objectId which would be set from the last step if account was created in the directory. -->
    <OrchestrationStep Order="6" Type="ClaimsExchange">
      <Preconditions>
        <Precondition Type="ClaimsExist" ExecuteActionsIf="true">
          <Value>objectId</Value>
          <Action>SkipThisOrchestrationStep</Action>
        </Precondition>
      </Preconditions>
      <ClaimsExchanges>
        <ClaimsExchange Id="AADUserWrite" TechnicalProfileReferenceId="AAD-UserWriteUsingAlternativeSecurityId" />
      </ClaimsExchanges>
    </OrchestrationStep>

    <!-- Phone verification: If MFA is not required, the next three steps (#5-#7) should be removed.
         This step checks whether there's a phone number on record,  for the user. If found, then the user is challenged to verify it. -->
    <OrchestrationStep Order="7" Type="ClaimsExchange">
      <Preconditions>
        <Precondition Type="ClaimsExist" ExecuteActionsIf="true">
          <Value>isActiveMFASession</Value>
          <Action>SkipThisOrchestrationStep</Action>
        </Precondition>
      </Preconditions>
      <ClaimsExchanges>
        <ClaimsExchange Id="PhoneFactor-Verify" TechnicalProfileReferenceId="PhoneFactor-InputOrVerify" />
      </ClaimsExchanges>
    </OrchestrationStep>



    <!-- Save MFA phone number: The precondition verifies whether the user provided a new number in the 
         previous step. If so, then the phone number is stored in the directory for future authentication 
         requests. -->
    <OrchestrationStep Order="8" Type="ClaimsExchange">
      <Preconditions>
        <Precondition Type="ClaimsExist" ExecuteActionsIf="false">
          <Value>newPhoneNumberEntered</Value>
          <Action>SkipThisOrchestrationStep</Action>
        </Precondition>
      </Preconditions>
      <ClaimsExchanges>
        <ClaimsExchange Id="AADUserWriteWithObjectId" TechnicalProfileReferenceId="AAD-UserWritePhoneNumberUsingObjectId" />
      </ClaimsExchanges>
    </OrchestrationStep>

    <OrchestrationStep Order="9" Type="SendClaims" CpimIssuerTechnicalProfileReferenceId="JwtIssuer" />

  </OrchestrationSteps>
  <ClientDefinition ReferenceId="DefaultWeb" />
</UserJourney>

AAD-UserReadUsingObjectId

    <TechnicalProfile Id="AAD-UserReadUsingObjectId">
      <Metadata>
        <Item Key="Operation">Read</Item>
        <Item Key="RaiseErrorIfClaimsPrincipalDoesNotExist">true</Item>
      </Metadata>
      <IncludeInSso>false</IncludeInSso>
      <InputClaims>
        <InputClaim ClaimTypeReferenceId="objectId" Required="true" />
      </InputClaims>     
      <OutputClaims>
        <OutputClaim ClaimTypeReferenceId="strongAuthenticationPhoneNumber" />
        <OutputClaim ClaimTypeReferenceId="signInNames.emailAddress" />
        <OutputClaim ClaimTypeReferenceId="displayName" />
        <OutputClaim ClaimTypeReferenceId="otherMails" />
        <OutputClaim ClaimTypeReferenceId="givenName" />
        <OutputClaim ClaimTypeReferenceId="surname" />
        <OutputClaim ClaimTypeReferenceId="extension_mustResetPassword" />
      </OutputClaims>
      <IncludeTechnicalProfile ReferenceId="AAD-Common" />
    </TechnicalProfile>

Answer 1

电子邮件声明未发出，因为 AAD-UserReadUsingObjectId 技术资料未检索到该声明。

在 AAD-UserReadUsingObjectId 技术资料中，您可以从 signInNames.emailAddress 声明映射到 email 声明，如下所示：< / p>

<TechnicalProfile Id="AAD-UserReadUsingObjectId">
  <OutputClaims>
    <OutputClaim ClaimTypeReferenceId="email" PartnerClaimType="signInNames.emailAddress" />
  </OutputClaims>
</TechnicalProfile>

您可以通过添加一个对https://jwt.io/或https://jwt.ms/进行响应的Azure AD B2C应用程序来检查已发出的索赔，然后运行此Azure AD B2C应用程序的内置或自定义策略。

索赔中缺少电子邮件-如何查找B2C传递的内容并进行修复？

1 个答案: