Question

尝试使用ptrace + seccomp获取系统调用的返回值时，我有些困惑。

 FILTER MACHINE
A filter program is an array of instructions, with  all branches forwardly 
directed, terminated by a return instruction

man 2 ptrace说：

 PTRACE_O_TRACESECCOMP  
While this triggers a PTRACE_EVENT stop, it is
similar to a syscall-enter-stop, in that the tracee has not yet
entered the syscall that seccomp triggered on. The seccomp event
message data (from the SECCOMP_RET_DATA portion of the seccomp filter
rule) can be retrieved with PTRACE_GETEVENTMSG.

 PTRACE_GETEVENTMSG 
For PTRACE_EVENT_SECCOMP, this is the seccomp(2)
filter's SECCOMP_RET_DATA associated with the triggered rule.

人2 seccomp说：

 SECCOMP_RET_TRACE
The tracer will be notified of a 
PTRACE_EVENT_SECCOMP  and  the  SECCOMP_RET_DATA
portion of the filter's return value will be available to 
the tracer via PTRACE_GETEVENTMSG
 [...]
The seccomp check will not be run again after the tracer is notified.

事实证明，BPF_RET语句之后，BPF程序无法执行进一步的操作。因此，当tracee在SECCOMP_RET_TRACE上被中断时，它处于syscall-enter-stop状态，并且尚未进行系统调用，因此，返回代码绝对无处可去。我希望在随后的调用PTRACE_SYSCALL之后，tracee将处于syscall-exit-stop状态，并且tracer将能够使用PTRACE_GETEVENTMSG获取syscall的结果。但这在我的示例中不起作用。

#include <linux/filter.h>
#include <linux/seccomp.h>
#include <linux/unistd.h>
#include <stddef.h>
#include <stdio.h>
#include <sys/prctl.h>
#include <sys/ptrace.h>
#include <sys/wait.h>
#include <unistd.h>

int main(int argc, char **argv)
{
    pid_t pid;
    int status;

    if (argc < 2) {
        fprintf(stderr, "Usage: %s <prog> <arg1> ... <argN>\n", argv[0]);
        return 1;
    }

    if ((pid = fork()) == 0) {
        ptrace(PTRACE_TRACEME, 0, 0, 0);

        struct sock_filter filter[] = {
            BPF_STMT(BPF_LD | BPF_W | BPF_ABS, (offsetof(struct seccomp_data, nr))),
            BPF_JUMP(BPF_JMP | BPF_JEQ | BPF_K, __NR_open, 1, 2),
            BPF_JUMP(BPF_JMP | BPF_JEQ | BPF_K, __NR_openat, 0, 1),
            BPF_STMT(BPF_RET | BPF_K, SECCOMP_RET_TRACE | SECCOMP_RET_DATA),
            BPF_STMT(BPF_RET | BPF_K, SECCOMP_RET_ALLOW),
        };
        struct sock_fprog prog = {
            .filter = filter,
            .len = (unsigned short) (sizeof(filter)/sizeof(filter[0])),
        };

        if (prctl(PR_SET_NO_NEW_PRIVS, 1, 0, 0, 0) == -1)
            return 2;
        if (prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &prog) == -1)
            return 3;

        kill(getpid(), SIGSTOP);
        return execvp(argv[1], argv + 1);
    } else {
        waitpid(pid, &status, 0);
        ptrace(PTRACE_SETOPTIONS, pid, 0, PTRACE_O_TRACESECCOMP);
        ptrace(PTRACE_CONT, pid, 0, 0);

        int status = 0;
        unsigned long ret_data = 0;
        while(1) {
            while (1) {
                waitpid(pid, &status, 0);
                fprintf(stderr, "status = %08x\n", status);

                if (status >> 8 == (SIGTRAP | (PTRACE_EVENT_SECCOMP << 8)))
                    break;

                if (WIFEXITED(status))
                    return 0;
                ptrace(PTRACE_CONT, pid, 0, 0);
            }
            // restart stopped tracee
            ptrace(PTRACE_SYSCALL, pid, 0, 0);
            // wait for SIGTRAP, when tracee will be in the syscall-exit-stop state
            waitpid(pid, &status, 0);

            ptrace(PTRACE_GETEVENTMSG, pid, 0, &ret_data);
            fprintf(stderr, "retdat = %lu\n", ret_data);

            ptrace(PTRACE_CONT, pid, 0, 0);
        }
        return 0;
    }
}

我能够获取syscall的返回码检查寄存器

    // ptrace(PTRACE_GETEVENTMSG, pid, 0, &ret_data);
    struct user_regs_struct regs;
    ptrace(PTRACE_GETREGS, pid, 0, &regs);
    fprintf(stderr, "retdat = %lu\n", regs.rax);

但是我不知道如何按照文档中指定的方式进行操作。

Answer 1

如何使用SECCOMP_RET_DATA和PTRACE_GETEVENTMSG获取系统调用的返回码？

简单的答案是您不能。 seccomp 事件在进入系统调用之前就已发送。您还看不到任何结果，因为还没有任何系统调用。要获得一个，必须在收到 seccomp 事件

后，使用PTRACE_SYSCALL将过程旋转两次：

bool WaitForSyscallExit(const pid_t pid)
{
  bool entered = false;
  int  status  = 0;

  while (true)
  {
    ptrace(PTRACE_SYSCALL, pid, 0, 0);
    waitpid(pid, &status, 0);

    if (WSTOPSIG(status) == SIGTRAP)
    {
      if (entered)
      {
        // If we had already entered before, then current SIGTRAP signal means exiting
        break;
      }
      entered = true;
    }
    else if (WIFEXITED(status) || WIFSIGNALED(status) || WCOREDUMP(status))
    {
      std::cerr << "The child has unexpectedly exited." << std::endl;

      return false;
    }
  }

  return true;
}

使用PTRACE_SYSCALL时，该过程将停止两次（第一次进入系统调用后，下次以及最后一次退出后）。您只能在系统调用实际完成后才能获得结果，因此在第二个进程停止之后即可。是的，您只能通过手动读取寄存器来完成此操作，因为 seccomp 结构只能在此事件的 seccomp 跟踪处理程序中使用。甚至结构本身也不包含任何与系统调用结果相关的内容，手册页也没有提到获取结果值。

如何使用SECCOMP_RET_DATA和PTRACE_GETEVENTMSG获取系统调用的返回码

1 个答案: