我有两台机器:
主控(IP:192.168.0.155)
从站(IP:192.168.0.3)
该网络的网关为:192.168.0.1
我正在通过RDP连接到从设备(都赢得了10x64 Pro),一切都很好。 现在,我想从从服务器连接,并为此目的将RDP会话保持为使用Cisco AnyConnect的VPN。
我设法连接到VPN,但是一旦连接到VPN,我的RDP会话就会死掉。
我当然可以先从Slave设置VPN会话,然后再尝试通过RDP连接到该计算机,但是不幸的是,路由发生了变化,无法从 Master 连接到通过RDP从站。
在从设备计算机上连接到VPN后的路由表:
路线打印-4
IPv4 Route Table
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.168.0.1 192.168.0.3 50
0.0.0.0 0.0.0.0 10.7.0.1 10.7.0.25 2
10.7.0.0 255.255.255.0 On-link 10.7.0.25 257
10.7.0.25 255.255.255.255 On-link 10.7.0.25 257
10.7.0.255 255.255.255.255 On-link 10.7.0.25 257
127.0.0.0 255.0.0.0 On-link 127.0.0.1 331
127.0.0.1 255.255.255.255 On-link 127.0.0.1 331
127.255.255.255 255.255.255.255 On-link 127.0.0.1 331
172.110.204.217 255.255.255.255 192.168.0.1 192.168.0.3 51
192.168.0.1 255.255.255.255 On-link 192.168.0.3 51
192.168.0.3 255.255.255.255 On-link 192.168.0.3 306
224.0.0.0 240.0.0.0 On-link 127.0.0.1 331
224.0.0.0 240.0.0.0 On-link 192.168.0.3 306
224.0.0.0 240.0.0.0 On-link 10.7.0.25 257
255.255.255.255 255.255.255.255 On-link 127.0.0.1 331
255.255.255.255 255.255.255.255 On-link 192.168.0.3 306
255.255.255.255 255.255.255.255 On-link 10.7.0.25 257
===========================================================================
Persistent Routes:
Network Address Netmask Gateway Address Metric
0.0.0.0 0.0.0.0 10.7.0.1 1
===========================================================================
ipconfig
Ethernet adapter Ethernet 2:
IPv6 Address. . . . . . . . . . . : 2620:121::6e
Link-local IPv6 Address . . . . . : fe80::d8f6:ac5:ccd6:a636%3
IPv4 Address. . . . . . . . . . . : 10.7.0.25
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : ::
10.7.0.1
Wireless LAN adapter Wi-Fi:
Connection-specific DNS Suffix . : local
IPv6 Address. . . . . . . . . . . : 2a02:a311:413c:2e80:1166:72e6:1d60:f3cc
Temporary IPv6 Address. . . . . . : 2a02:a311:413c:2e80:6812:c8d0:eb78:2b93
Link-local IPv6 Address . . . . . : fe80::1166:72e6:1d60:f3cc%4
IPv4 Address. . . . . . . . . . . : 192.168.0.3
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : fe80::20b:ff:fe00:add0%4
192.168.0.1
我应该如何更改路由表以保持RDP连接并连接到VPN?
谢谢