我正在APU2上使用Openwrt，并且我想在不使用CRDA的情况下添加自己的db.txt。我知道可以通过在.config中启用选项CONFIG_CFG80211_INTERNAL_REGDB并在/ net / wireless中添加所需的db.txt来实现。我知道启用此选项后，我将需要为任何法规更新重建内核，但就我的目的而言，这是最好的。
一切正常编译，但是当我打开APU时，会出现以下消息：
[ 9.600475] kmodloader: 11 modules could not be probed
[ 9.605686] kmodloader: dependency not loaded cfg80211
[ 9.610959] kmodloader: - ath - 1
[ 9.614489] kmodloader: dependency not loaded mac80211
[ 9.619787] kmodloader: dependency not loaded ath9k_hw
[ 9.625135] kmodloader: dependency not loaded ath9k_common
[ 9.630779] kmodloader: dependency not loaded cfg80211
[ 9.636066] kmodloader: dependency not loaded ath
[ 9.641052] kmodloader: - ath9k - 5
[ 9.644675] kmodloader: dependency not loaded cfg80211
[ 9.650012] kmodloader: dependency not loaded ath9k_hw
[ 9.655384] kmodloader: dependency not loaded ath
[ 9.660221] kmodloader: - ath9k_common - 3
[ 9.664428] kmodloader: dependency not loaded mac80211
[ 9.669835] kmodloader: dependency not loaded ath9k_hw
[ 9.675216] kmodloader: dependency not loaded ath9k_common
[ 9.680884] kmodloader: dependency not loaded ath
[ 9.685756] kmodloader: dependency not loaded cfg80211
[ 9.691143] kmodloader: - ath9k_htc - 5
[ 9.695178] kmodloader: dependency not loaded ath
[ 9.700111] kmodloader: - ath9k_hw - 1
[ 9.703966] kmodloader: - cfg80211 - 0
[ 9.707922] kmodloader: dependency not loaded cfg80211
[ 9.713336] kmodloader: - mac80211 - 1
[ 9.717306] kmodloader: dependency not loaded mac80211
[ 9.722701] kmodloader: dependency not loaded cfg80211
[ 9.728037] kmodloader: - mac80211_hwsim - 2
一些基本命令（例如“ iw list”）没有给出答案。如果不启用此选项，网卡将正常运行。
我阅读的所有信息都表明我正在遵循正确的方法。你知道我在做什么错吗？