我的Windows 10笔记本电脑最近几乎每天都在不使用BSOD的情况下（这是一台工作PC，因此问题发生在晚上10点到凌晨6点）。崩溃转储看起来都一样：
vivi.png如果我没记错的话，我应该研究为什么在故障发生之前将RSI设置为0。并且“ u”命令显示一条“ call qword ptr [rbp + 198h]”指令可能在故障之前。
IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 0000000000002d30, memory referenced
Arg2: 00000000000000ff, IRQL
Arg3: 00000000000000e8, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff8011be4e0ff, address which referenced memory
...
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
BUGCHECK_STR: AV
PROCESS_NAME: System
...
LAST_CONTROL_TRANSFER: from fffff8011bf6bba9 to fffff8011bf59dc0
STACK_TEXT:
fffff801`1dc625c8 fffff801`1bf6bba9 : 00000000`0000000a 00000000`00002d30 00000000`000000ff 00000000`000000e8 : nt!KeBugCheckEx
fffff801`1dc625d0 fffff801`1bf6855a : 0000006b`b0e5bb5a fffff801`1dc62940 00000000`00000002 fffff801`1bf3aecc : nt!KiBugCheckDispatch+0x69
fffff801`1dc62710 fffff801`1be4e0ff : 00000000`00000000 fffff801`1bfed7b6 ffffe001`9510d010 ffffe001`97fc14f0 : nt!KiPageFault+0x51a
fffff801`1dc628a0 fffff801`1be4d31b : 00000000`00000000 00000000`00000002 00000000`00000000 00000000`00000000 : nt!PpmIdleExecuteTransition+0xc2f
fffff801`1dc62b00 fffff801`1bf5d24c : 00000000`00000000 fffff801`1c126180 fffff801`1c19c740 ffffe001`9355c080 : nt!PoIdle+0x33b
fffff801`1dc62c60 00000000`00000000 : fffff801`1dc63000 fffff801`1dc5d000 00000000`00000000 00000000`00000000 : nt!KiIdleLoop+0x2c
0: kd> .trap fffff801`1dc62710
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=0000000000000012
rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000
rip=fffff8011be4e0ff rsp=fffff8011dc628a0 rbp=0000000000000000
r8=0000000000000000 r9=0000000000000000 r10=0000000000000000
r11=0000000000000000 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up di ng nz na po nc
nt!PpmIdleExecuteTransition+0xc2f:
fffff801`1be4e0ff 0fb686302d0000 movzx eax,byte ptr [rsi+2D30h] ds:00000000`00002d30=??
感谢您有关如何进一步调试此BSOD的指南。我的故障排除方向可能是错误的，在这种情况下，我会竭诚为您提供见解。预先感谢！