Question

我正在尝试创建一个通过USB集线器的设备的SymLink，我认为这会导致我的问题。我尝试了以下udev规则，但是插入时只有第一个找到该设备。尽管找到了它，但它链接到/ dev / bus / usb / 001/020，而不是/ dev / ttyUSB0。我的规则应该是什么样的才能获得适用于此设备的SymLink？

SUBSYSTEM=="usb", ACTION=="add", ATTR{idVendor}=="0403", ATTR{idProduct}=="6011", SYMLINK+="ttyGpsSerial"
SUBSYSTEM=="tty", ACTION=="add", ATTR{idVendor}=="0403", ATTR{idProduct}=="6011", SYMLINK+="ttyGpsSerial"
KERNEL=="ttyUSB*", ACTION=="add", ATTR{idVendor}=="0403", ATTR{idProduct}=="6011", SYMLINK+="ttyGpsSerial"

“ udevadm信息--attribute-walk --name / dev / ttyUSB0”的输出：

  looking at device '/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/ttyUSB0/tty/ttyUSB0':
    KERNEL=="ttyUSB0"
    SUBSYSTEM=="tty"
    DRIVER==""

  looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/ttyUSB0':
    KERNELS=="ttyUSB0"
    SUBSYSTEMS=="usb-serial"
    DRIVERS=="ftdi_sio"
    ATTRS{latency_timer}=="16"
    ATTRS{port_number}=="0"

  looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0':
    KERNELS=="1-4:1.0"
    SUBSYSTEMS=="usb"
    DRIVERS=="ftdi_sio"
    ATTRS{authorized}=="1"
    ATTRS{bAlternateSetting}==" 0"
    ATTRS{bInterfaceClass}=="ff"
    ATTRS{bInterfaceNumber}=="00"
    ATTRS{bInterfaceProtocol}=="ff"
    ATTRS{bInterfaceSubClass}=="ff"
    ATTRS{bNumEndpoints}=="02"
    ATTRS{interface}=="USB <-> Serial Cable"
    ATTRS{supports_autosuspend}=="1"

  looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1/1-4':
    KERNELS=="1-4"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{authorized}=="1"
    ATTRS{avoid_reset_quirk}=="0"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bDeviceClass}=="00"
    ATTRS{bDeviceProtocol}=="00"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bMaxPacketSize0}=="64"
    ATTRS{bMaxPower}=="100mA"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{bNumInterfaces}==" 4"
    ATTRS{bcdDevice}=="0800"
    ATTRS{bmAttributes}=="80"
    ATTRS{busnum}=="1"
    ATTRS{configuration}==""
    ATTRS{devnum}=="29"
    ATTRS{devpath}=="4"
    ATTRS{idProduct}=="6011"
    ATTRS{idVendor}=="0403"
    ATTRS{ltm_capable}=="no"
    ATTRS{manufacturer}=="FTDI"
    ATTRS{maxchild}=="0"
    ATTRS{product}=="USB <-> Serial Cable"
    ATTRS{quirks}=="0x0"
    ATTRS{removable}=="removable"
    ATTRS{serial}=="FT1RAIYI"
    ATTRS{speed}=="480"
    ATTRS{urbnum}=="23"
    ATTRS{version}==" 2.00"

  looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1':
    KERNELS=="usb1"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{authorized}=="1"
    ATTRS{authorized_default}=="1"
    ATTRS{avoid_reset_quirk}=="0"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bDeviceClass}=="09"
    ATTRS{bDeviceProtocol}=="01"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bMaxPacketSize0}=="64"
    ATTRS{bMaxPower}=="0mA"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bcdDevice}=="0415"
    ATTRS{bmAttributes}=="e0"
    ATTRS{busnum}=="1"
    ATTRS{configuration}==""
    ATTRS{devnum}=="1"
    ATTRS{devpath}=="0"
    ATTRS{idProduct}=="0002"
    ATTRS{idVendor}=="1d6b"
    ATTRS{interface_authorized_default}=="1"
    ATTRS{ltm_capable}=="no"
    ATTRS{manufacturer}=="Linux 4.15.0-33-generic xhci-hcd"
    ATTRS{maxchild}=="16"
    ATTRS{product}=="xHCI Host Controller"
    ATTRS{quirks}=="0x0"
    ATTRS{removable}=="unknown"
    ATTRS{serial}=="0000:00:14.0"
    ATTRS{speed}=="480"
    ATTRS{urbnum}=="1232"
    ATTRS{version}==" 2.00"

  looking at parent device '/devices/pci0000:00/0000:00:14.0':
    KERNELS=="0000:00:14.0"
    SUBSYSTEMS=="pci"
    DRIVERS=="xhci_hcd"
    ATTRS{broken_parity_status}=="0"
    ATTRS{class}=="0x0c0330"
    ATTRS{consistent_dma_mask_bits}=="64"
    ATTRS{d3cold_allowed}=="1"
    ATTRS{dbc}=="disabled"
    ATTRS{device}=="0xa12f"
    ATTRS{dma_mask_bits}=="64"
    ATTRS{driver_override}=="(null)"
    ATTRS{enable}=="1"
    ATTRS{irq}=="122"
    ATTRS{local_cpulist}=="0-7"
    ATTRS{local_cpus}=="ff"
    ATTRS{msi_bus}=="1"
    ATTRS{numa_node}=="-1"
    ATTRS{revision}=="0x31"
    ATTRS{subsystem_device}=="0x06d9"
    ATTRS{subsystem_vendor}=="0x1028"
    ATTRS{vendor}=="0x8086"

  looking at parent device '/devices/pci0000:00':
    KERNELS=="pci0000:00"
    SUBSYSTEMS==""
    DRIVERS==""

Answer 1

我终于意识到通过“ S”属性存在差异。因此，我可以将较高的级别与特定的较低级别相匹配。因此，SUBSYSTEM可以保留为tty，但随后搜索ATTRS而不是ATTR。

所以我只需要将此行添加到新文件/etc/udev/rules.d/95-custom.rules：

SUBSYSTEM=="tty", ACTION=="add", ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6011", SYMLINK+="ttyGpsSerial"

Udev规则通过集线器创建与USB设备的SymLink

1 个答案: