这是我在Ubuntu 18.04中尝试安装git时得到的。我可能会问一个重复的问题，但是我没有任何解决方法。
kcn@kcn-UBUNTU:~$ sudo apt-get install git
Reading package lists... Done
Building dependency tree
Reading state information... Done
git is already the newest version (1:2.17.1-1ubuntu0.3).
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
3 not fully installed or removed.
Need to get 0 B/7,732 B of archives.
After this operation, 0 B of additional disk space will be used.
Do you want to continue? [Y/n] y
dpkg: error processing package libavahi-glib1:amd64 (--configure):
package is in a very bad inconsistent state; you should
reinstall it before attempting configuration
dpkg: dependency problems prevent configuration of geoclue-2.0:
geoclue-2.0 depends on libavahi-glib1 (>= 0.6.16); however:
Package libavahi-glib1:amd64 is not configured yet.
No apport report written because the error message indicates its a followup error from a previous failure.
dpkg: error processing package geoclue-2.0 (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of libgeoclue-2-0:amd64:
libgeoclue-2-0:amd64 depends on geoclue-2.0 (= 2.4.7-1ubuntu1); however:
Package geoclue-2.0 is not configured yet.
dpkg: error processing package libgeoclue-2-0:amd64 (--configure):
dependency problems - leaving unconfigured
No apport report written because the error message indicates its a followup error from a previous failure.
Errors were encountered while processing:
libavahi-glib1:amd64
geoclue-2.0
libgeoclue-2-0:amd64
E: Sub-process /usr/bin/dpkg returned an error code (1)
我尝试执行以下操作：
kcn@kcn-UBUNTU:~$ sudo apt-get install git
kcn的[sudo]密码：
E：dpkg被中断，必须手动运行'sudo dpkg --configure -a'纠正问题。
所以我打了
kcn@kcn-UBUNTU:~$ sudo dpkg --configure -a
................
................
dpkg: error processing package libavahi-glib1:amd64 (--configure):
package is in a very bad inconsistent state; you should
reinstall it before attempting configuration
答案 0 :(得分：4)
尝试一下：
sudo dpkg --configure -a
sudo apt-get -f install
sudo apt install libavahi-glib1 --reinstall
sudo dpkg --configure -a 指示dpkg自己“修复”
sudo apt-get -f install 这将指示apt-get纠正依赖关系并继续配置您的软件包。
sudo apt install libavahi-glib1 --reinstall 重新安装“ probelatic软件包”
答案 1 :(得分：0)
首先尝试重新安装损坏的软件包，如提示中所述，例如
sudo apt-get install --reinstall libavahi-glib1