我正在使用“ CL-SOM-AM57x-TI AM5728 / AM5718模块化系统”。
我试图安装由compulab Link提供的Yocto Linux。
我选择自动安装，但是安装后出现错误，无法在该设备上启动Yocto Linux。 （Automatic Installation Instructions）
我在下面发布了错误。如何正确安装Yocto Linux？为什么会发生此错误？
Hit any key to stop autoboot: 0
Saving Environment to SPI Flash...
SF: Detected w25q16cl with page size 256 Bytes, erase size 4 KiB, total 2 MiB,
mapped at 5c000000
Erasing SPI flash...Writing to SPI flash...done
switch to partitions #0, OK
mmc1(part 0) is current device
** File not found kernel.img **
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
No FDT memory address configured. Please configure
the FDT address via "fdt addr <address>" command.
Aborting!
No FDT memory address configured. Please configure
the FDT address via "fdt addr <address>" command.
Aborting!
No FDT memory address configured. Please configure
the FDT address via "fdt addr <address>" command.
Aborting!
No FDT memory address configured. Please configure
the FDT address via "fdt addr <address>" command.
Aborting!
No FDT memory address configured. Please configure
the FDT address via "fdt addr <address>" command.
Aborting!
No FDT memory address configured. Please configure
the FDT address via "fdt addr <address>" command.
Aborting!
No FDT memory address configured. Please configure
the FDT address via "fdt addr <address>" command.
Aborting!
No FDT memory address configured. Please configure
the FDT address via "fdt addr <address>" command.
Aborting!
No FDT memory address configured. Please configure
the FDT address via "fdt addr <address>" command.
Aborting!
No FDT memory address configured. Please configure
the FDT address via "fdt addr <address>" command.
Aborting!
ERROR: Did not find a cmdline Flattened Device Tree
Could not find a valid device tree
答案 0 :(得分：0)
在引导程序（可能是u-boot）中，必须指定引导环境。要加载内核和设备树，必须设置bootcmd。要访问主板的用户空间，需要使用文件系统在bootargs变量中。