无法删除此问题。它被转移到另一个论坛。
我正在尝试通过串行线路在两台Linux机器之间建立PPP连接。我关注了these instructions，但没有成功。这两个机器分别是Fedora 28 Linux上的Intel(R) Core(TM) i7-7600U CPU @ 2.80GHz和Linux 4.14.0-xilinx-v2018.2上带有ARMv7 A的定制板。
这是我在Fedora机器上获得的命令和输出：
$ sudo pppd -detach debug passive lock xonxoff 192.168.10.100:192.168.10.1 /dev/ttyUSB0 9600
[sudo] password for user:
using channel 3
Using interface ppp0
Connect: ppp0 <--> /dev/ttyUSB0
sent [LCP ConfReq id=0x1 <asyncmap 0xa0000> <magic 0x888f0bcb> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0xa0000> <magic 0x888f0bcb> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0xa0000> <magic 0x888f0bcb> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0xa0000> <magic 0x888f0bcb> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0xa0000> <magic 0x888f0bcb> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0xa0000> <magic 0x888f0bcb> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0xa0000> <magic 0x888f0bcb> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0xa0000> <magic 0x888f0bcb> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0xa0000> <magic 0x888f0bcb> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0xa0000> <magic 0x888f0bcb> <pcomp> <accomp>]
LCP: timeout sending Config-Requests
这是我得到的Linux 4.14.0-xilinx-v2018.2
root@cpe-08:/data# pppd -detach debug passive lock xonxoff 192.168.10.1:192.168.10.100 /dev/ttyS0 9
600
是的，您没看错，没有其他输出Linux4.14.0-xilinx-v2018.2。
我原本希望在两台计算机上都看到ppp0界面，但是没有看到它们。
这是运行ifconfig命令后Fedora 28上pppd的输出
$ ifconfig
enp0s20f0u2u2: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 172.24.176.116 netmask 255.255.255.0 broadcast 172.24.176.255
inet6 fe80::63fd:53b6:8b94:1abf prefixlen 64 scopeid 0x20<link>
ether 00:0e:c6:a5:94:88 txqueuelen 1000 (Ethernet)
RX packets 5016 bytes 457454 (446.7 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 1368 bytes 141981 (138.6 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
enp0s31f6: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 54:e1:ad:8c:32:a5 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 16 memory 0xec200000-ec220000
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 184264 bytes 109696260 (104.6 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 184264 bytes 109696260 (104.6 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
virbr0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
inet 192.168.122.1 netmask 255.255.255.0 broadcast 192.168.122.255
ether 52:54:00:62:c0:6c txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlp58s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 100.96.37.134 netmask 255.255.255.192 broadcast 100.96.37.191
inet6 fe80::3728:7f03:ba95:5757 prefixlen 64 scopeid 0x20<link>
inet6 2620:10d:c0be:2226:7261:932:1670:38bb prefixlen 64 scopeid 0x0<global>
ether f8:34:41:af:1a:0e txqueuelen 1000 (Ethernet)
RX packets 13305344 bytes 16391874252 (15.2 GiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 5691206 bytes 1228184162 (1.1 GiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
这是运行ifconfig命令后Linux 4.14.0-xilinx-v2018.2在pppd上的输出
# ifconfig
eth0 Link encap:Ethernet HWaddr 00:04:35:00:01:08
inet addr:172.24.176.208 Bcast:172.24.176.255 Mask:255.255.255.0
inet6 addr: fe80::204:35ff:fe00:108/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2515 errors:0 dropped:0 overruns:0 frame:0
TX packets:753 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:221227 (216.0 KiB) TX bytes:93698 (91.5 KiB)
Interrupt:27 Base address:0xb000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:36160 errors:0 dropped:0 overruns:0 frame:0
TX packets:36160 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1516794 (1.4 MiB) TX bytes:1516794 (1.4 MiB)
我知道Linux 4.14.0-xilinx-v2018.2被编译为包含ppp支持。我本应包括“ .config”的摘录，但构建未提供该摘录。我知道ppp支持在内核中的原因是因为我问我们的构建人员，他说他包括了它。在此方面，我将不胜感激。
答案 0 :(得分：0)
弄乱了一段时间后，我设法使其工作了。这是Fedora机器的命令
sudo 0pppd -detach local debug noauth passive lock 192.168.10.100:192.168.10.1 /dev/ttyUSB0 9600
这是Linux 4.14.0-xilinx-v2018.2机器的命令
pppd -detach persist debug local noauth passive lock 192.168.10.1:192.168.10.100 /dev/ttyS0 9600
过去2个月来我一直在努力解决这个问题。不知道为什么这个问题最初被降级。我想还有其他人也遇到过同样的问题。