如何将BlueZ配置为要求连接设备输入匹配的密码?

时间:2018-09-03 03:29:42

标签: embedded-linux bluez

我正在尝试在嵌入式Linux设备上设置蓝牙,以便使用SSP模式,并且我的设备在其显示屏上生成并显示密码,并且要求远端(例如用户的电话)输入匹配的密码才能成功配对。

我正在编写/注册一个将其模式设置为DisplayOnly的代理;我期望当设备连接“ RequestPasskey”回调时,我的代理将能够生成并返回新的密码,并且要求远程端输入相同的密码。我实际上看到的是远程端正在生成自己的密码。

如果我禁用SSP并使用旧版配对,则可以实现类似所需行为的功能,但我不必这样做。

使用BlueZ是否可以实现此行为?

1 个答案:

答案 0 :(得分:0)

为简化此处的讨论,请考虑来自Bluetooth SIG的Bluetooth Pairing blog的解释。

为简单起见,下面的图片是从上述博客中复制的。

enter image description here

因此,输入可以是“无输入”,“是/否”和“键盘”三种形式。输出可以是“无输出”和“数字输出”。

在您的情况下,您想在嵌入式设备中生成密码(我们可以将其命名为响应者),然后在启动连接的设备中输入密钥(我们可以将其命名为发起者)。

要实现这种情况,您需要指定

响应者(嵌入式设备):作为“仅键盘” 启动器:也作为“仅键盘”

要进行实验,请使用以下示例代理程序,

/*
 * gcc `pkg-config --cflags glib-2.0 gio-2.0` -Wall -Wextra -o ./bin/agent ./agent.c `pkg-config --libs glib-2.0 gio-2.0`
 */
#include <glib.h>
#include <gio/gio.h>
#include <stdio.h>

GMainLoop *loop;
GDBusConnection *con;
#define AGENT_PATH  "/org/bluez/AutoPinAgent"

static void bluez_agent_method_call(GDBusConnection *conn,
                    const gchar *sender,
                    const gchar *path,
                    const gchar *interface,
                    const gchar *method,
                    GVariant *params,
                    GDBusMethodInvocation *invocation,
                    void *userdata)
{
    int pass;
    int entered;
    char *opath;
    GVariant *p= g_dbus_method_invocation_get_parameters(invocation);

    g_print("Agent method call: %s.%s()\n", interface, method);
    if(!strcmp(method, "RequestPinCode")) {
        ;
    }
    else if(!strcmp(method, "DisplayPinCode")) {
        ;
    }
    else if(!strcmp(method, "RequestPasskey")) {
        g_print("Getting the Pin from user: ");
        fscanf(stdin, "%d", &pass);
        g_print("\n");
        g_dbus_method_invocation_return_value(invocation, g_variant_new("(u)", pass));
    }
    else if(!strcmp(method, "DisplayPasskey")) {
        g_variant_get(params, "(ouq)", &opath, &pass, &entered);
        g_print("Path: %s Pass: %d Entered: %d\n", opath, pass, entered);
        g_dbus_method_invocation_return_value(invocation, NULL);
    }
    else if(!strcmp(method, "RequestConfirmation")) {
        g_variant_get(params, "(ou)", &opath, &pass);
        g_print("Path: %s Pass: %d\n", opath, pass);
        g_dbus_method_invocation_return_value(invocation, NULL);
    }
    else if(!strcmp(method, "RequestAuthorization")) {
        ;
    }
    else if(!strcmp(method, "AuthorizeService")) {
        ;
    }
    else if(!strcmp(method, "Cancel")) {
        ;
    }
    else
        g_print("We should not come here, unknown method\n");
}

static const GDBusInterfaceVTable agent_method_table = {
    .method_call = bluez_agent_method_call,
};

int bluez_register_agent(GDBusConnection *con)
{
    GError *error = NULL;
    guint id = 0;
    GDBusNodeInfo *info = NULL;

    static const gchar bluez_agent_introspection_xml[] =
        "<node name='/org/bluez/SampleAgent'>"
        "   <interface name='org.bluez.Agent1'>"
        "       <method name='Release'>"
        "       </method>"
        "       <method name='RequestPinCode'>"
        "           <arg type='o' name='device' direction='in' />"
        "           <arg type='s' name='pincode' direction='out' />"
        "       </method>"
        "       <method name='DisplayPinCode'>"
        "           <arg type='o' name='device' direction='in' />"
        "           <arg type='s' name='pincode' direction='in' />"
        "       </method>"
        "       <method name='RequestPasskey'>"
        "           <arg type='o' name='device' direction='in' />"
        "           <arg type='u' name='passkey' direction='out' />"
        "       </method>"
        "       <method name='DisplayPasskey'>"
        "           <arg type='o' name='device' direction='in' />"
        "           <arg type='u' name='passkey' direction='in' />"
        "           <arg type='q' name='entered' direction='in' />"
        "       </method>"
        "       <method name='RequestConfirmation'>"
        "           <arg type='o' name='device' direction='in' />"
        "           <arg type='u' name='passkey' direction='in' />"
        "       </method>"
        "       <method name='RequestAuthorization'>"
        "           <arg type='o' name='device' direction='in' />"
        "       </method>"
        "       <method name='AuthorizeService'>"
        "           <arg type='o' name='device' direction='in' />"
        "           <arg type='s' name='uuid' direction='in' />"
        "       </method>"
        "       <method name='Cancel'>"
        "       </method>"
        "   </interface>"
        "</node>";

    info = g_dbus_node_info_new_for_xml(bluez_agent_introspection_xml, &error);
    if(error) {
        g_printerr("Unable to create node: %s\n", error->message);
        g_clear_error(&error);
        return 0;
    }

    id = g_dbus_connection_register_object(con, 
            AGENT_PATH,
            info->interfaces[0],
            &agent_method_table,
            NULL, NULL, &error);
    g_dbus_node_info_unref(info);
    //g_dbus_connection_unregister_object(con, id);
    /* call register method in AgentManager1 interface */
    return id;
}

static int bluez_agent_call_method(const gchar *method, GVariant *param)
{
    GVariant *result;
    GError *error = NULL;

    result = g_dbus_connection_call_sync(con,
            "org.bluez",
            "/org/bluez",
            "org.bluez.AgentManager1",
            method,
            param,
            NULL,
            G_DBUS_CALL_FLAGS_NONE,
            -1,
            NULL,
            &error);
    if(error != NULL) {
        g_print("Register %s: %s\n", AGENT_PATH, error->message);
        return 1;
    }

    g_variant_unref(result);
    return 0;
}

static int bluez_register_autopair_agent(const char *cap)
{
    int rc;

    rc = bluez_agent_call_method("RegisterAgent", g_variant_new("(os)", AGENT_PATH, cap));
    if(rc)
        return 1;

    rc = bluez_agent_call_method("RequestDefaultAgent", g_variant_new("(o)", AGENT_PATH));
    if(rc) {
        bluez_agent_call_method("UnregisterAgent", g_variant_new("(o)", AGENT_PATH));
        return 1;
    }

    return 0;
}


static void cleanup_handler(int signo)
{
    if (signo == SIGINT) {
        g_print("received SIGINT\n");
        g_main_loop_quit(loop);
    }
}

int main(int argc, char **argv)
{
    int id;
    int rc;

    if(argc < 2)
        return 1;

    if(signal(SIGINT, cleanup_handler) == SIG_ERR)
        g_print("can't catch SIGINT\n");

    con = g_bus_get_sync(G_BUS_TYPE_SYSTEM, NULL, NULL);
    if(con == NULL) {
        g_print("Not able to get connection to system bus\n");
        return 1;
    }

    loop = g_main_loop_new(NULL, FALSE);

    id = bluez_register_agent(con);
    if(id == 0)
        goto fail;

    rc = bluez_register_autopair_agent(argv[1]);
    if(rc) {
        g_print("Not able to register default autopair agent\n");
        goto fail;
    }

    g_main_loop_run(loop);

fail:
    g_dbus_connection_unregister_object(con, id);
    g_object_unref(con);
    return 0;
}

要对此进行实验,必须在蓝牙“代理关闭”中禁用代理,然后以以下方式打开代理,

Responder: ./bin/agent "KeyboardOnly"
Initiator: ./bin/agent "KeyboardOnly"

当您尝试从启动器端启动连接时,两端都会调用RequestPasskey。您可以在最后输入相同的密钥。如果要响应固定密钥PIN,请在功能“ RequestPasskey ”的“响应者”端编辑代理代码,方法是答复固定PIN,然后手动输入相同的PIN,或者从“启动器”自动输入相同的PIN也结束了。