Question

我安装了所有必要的组件，可以安装和构建应用程序，最后我使用了-s构建来部署它。一切似乎都正常-但是，当我启动（firefox-browser）时，我可以看到徽标一会儿，然后写上“正在访问网络”，然后一会儿只有空白页。什么都看不见也没有点击。

2个屏幕截图：

Start Konsole

但是有很多错误，我也不知道为什么！

好吧，我还没有发现任何带有“ payload”的东西。.我有一个想法，认为数据库中的表出了错...但是我找不到东西。

所以-重要的是-首先： -任何日志文件中都没有任何内容 -config.json

{ 
    "network-config": { 
        "org1": {
            "name": "peerOrg1",
            "mspid": "Org1MSP", 
            "peer1": {
                "requests": "grpc://127.0.0.1:9050",
                "events": "grpc://127.0.0.1:9050",
                "server-hostname": "peer0.org1.example.com"
            },          
            "admin": {
                "key": "/home/osboxes/hyperledger/fabric-samples/basic-network/crypto-config/peerOrganizations/org1.example.com/users/Admin@org1.example.com/msp/keystore",
                "cert": "/home/osboxes/hyperledger/fabric-samples/basic-network/crypto-config/peerOrganizations/org1.example.com/users/Admin@org1.example.com/msp/signcerts"
            }
        }     
     },
   "host":"localhost",
   "port":"8080",
   "channel": "mychannel",
    "orderers":[
                {
                "mspid": "OrdererMSP",
                "server-hostname":"orderer.example.com",
                "requests":"grpc://127.0.0.1:7050",
                "tls_cacerts":"/home/osboxes/hyperledger/fabric-samples/basic-network/crypto-config/ordererOrganizations/example.com/orderers/orderer.example.com/tls/ca.crt"
                }
                ],
   "keyValueStore":"/tmp/fabric-client-kvs",
   "configtxgenToolPath": "/home/osboxes/hyperledger/fabric-samples/bin",
   "SYNC_START_DATE_FORMAT":"YYYY/MM/DD",
   "syncStartDate":"2018/01/01",
   "eventWaitTime":"30000",     
   "pg":{
      "host":"127.0.0.1",
      "port":"5432",
      "database":"fabricexplorer",
      "username":"hppoc",
      "passwd":"password"
   }
}

->我做了这些事情，如资源管理器中的问题所示：更改grpc，端口并删除certs-line（我可以在哪里看到对等方正在监听grpc的端口）

docker（容器和网络）据我了解，一切似乎都很好。这是kitematic的一些屏幕截图：
在此处输入图像描述[在此处输入图像描述] enter image description here 4

我可以通过kitematic看到我所有的容器都在运行。在那一刻，我问自己在哪里在浏览器中设置网络名称（我正在使用基本网络！）。

这是docker文件：

#
# Copyright IBM Corp All Rights Reserved
#
# SPDX-License-Identifier: Apache-2.0
#
version: '2'

networks:
  basic:

services:
  ca.example.com:
    image: hyperledger/fabric-ca
    environment:
      - FABRIC_CA_HOME=/etc/hyperledger/fabric-ca-server
      - FABRIC_CA_SERVER_CA_NAME=ca.example.com
      - FABRIC_CA_SERVER_CA_CERTFILE=/etc/hyperledger/fabric-ca-server-config/ca.org1.example.com-cert.pem
      - FABRIC_CA_SERVER_CA_KEYFILE=/etc/hyperledger/fabric-ca-server-config/9565378e944400b664b5818e341695b1dfcab71a9724bb3760e61420136065fb_sk
    ports:
      - "7054:7054"
    command: sh -c 'fabric-ca-server start -b admin:adminpw -d'
    volumes:
      - ./crypto-config/peerOrganizations/org1.example.com/ca/:/etc/hyperledger/fabric-ca-server-config
    container_name: ca.example.com
    networks:
      - basic

  orderer.example.com:
    container_name: orderer.example.com
    image: hyperledger/fabric-orderer
    environment:
      - ORDERER_GENERAL_LOGLEVEL=debug
      - ORDERER_GENERAL_LISTENADDRESS=0.0.0.0
      - ORDERER_GENERAL_GENESISMETHOD=file
      - ORDERER_GENERAL_GENESISFILE=/etc/hyperledger/configtx/genesis.block
      - ORDERER_GENERAL_LOCALMSPID=OrdererMSP
      - ORDERER_GENERAL_LOCALMSPDIR=/etc/hyperledger/msp/orderer/msp
    working_dir: /opt/gopath/src/github.com/hyperledger/fabric/orderer
    command: orderer
    ports:
      - 7050:7050
    volumes:
        - ./config/:/etc/hyperledger/configtx
        - ./crypto-config/ordererOrganizations/example.com/orderers/orderer.example.com/:/etc/hyperledger/msp/orderer
        - ./crypto-config/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/:/etc/hyperledger/msp/peerOrg1
    networks:
      - basic

  peer0.org1.example.com:
    container_name: peer0.org1.example.com
    image: hyperledger/fabric-peer
    environment:
      - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
      - CORE_PEER_ID=peer0.org1.example.com
      - CORE_LOGGING_PEER=debug
      - CORE_CHAINCODE_LOGGING_LEVEL=DEBUG
      - CORE_PEER_LOCALMSPID=Org1MSP
      - CORE_PEER_MSPCONFIGPATH=/etc/hyperledger/msp/peer/
      - CORE_PEER_ADDRESS=peer0.org1.example.com:7051
      # # the following setting starts chaincode containers on the same
      # # bridge network as the peers
      # # https://docs.docker.com/compose/networking/
      - CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=${COMPOSE_PROJECT_NAME}_basic
      - CORE_LEDGER_STATE_STATEDATABASE=CouchDB
      - CORE_LEDGER_STATE_COUCHDBCONFIG_COUCHDBADDRESS=couchdb:5984
      # The CORE_LEDGER_STATE_COUCHDBCONFIG_USERNAME and CORE_LEDGER_STATE_COUCHDBCONFIG_PASSWORD
      # provide the credentials for ledger to connect to CouchDB.  The username and password must
      # match the username and password set for the associated CouchDB.
      - CORE_LEDGER_STATE_COUCHDBCONFIG_USERNAME=
      - CORE_LEDGER_STATE_COUCHDBCONFIG_PASSWORD=
    working_dir: /opt/gopath/src/github.com/hyperledger/fabric
    #command: peer node start
    command: peer node start --peer-chaincodedev=true
    ports:
      - 7051:7051
      - 7053:7053
    volumes:
        - /var/run/:/host/var/run/
        - ./crypto-config/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/msp:/etc/hyperledger/msp/peer
        - ./crypto-config/peerOrganizations/org1.example.com/users:/etc/hyperledger/msp/users
        - ./config:/etc/hyperledger/configtx
    depends_on:
      - orderer.example.com
      - couchdb
    networks:
      - basic

  couchdb:
    container_name: couchdb
    image: hyperledger/fabric-couchdb
    # Populate the COUCHDB_USER and COUCHDB_PASSWORD to set an admin user and password
    # for CouchDB.  This will prevent CouchDB from operating in an "Admin Party" mode.
    environment:
      - COUCHDB_USER=
      - COUCHDB_PASSWORD=
    ports:
      - 5984:5984
    networks:
      - basic

  cli:
    container_name: cli
    image: hyperledger/fabric-tools
    tty: true
    environment:
      - GOPATH=/opt/gopath
      - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
      - CORE_LOGGING_LEVEL=DEBUG
      - CORE_PEER_ID=cli
      - CORE_PEER_ADDRESS=peer0.org1.example.com:7051
      - CORE_PEER_LOCALMSPID=Org1MSP
      - CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/users/Admin@org1.example.com/msp
      - CORE_CHAINCODE_KEEPALIVE=10
    working_dir: /opt/gopath/src/github.com/hyperledger/fabric/peer
    command: /bin/bash
    volumes:
        - /var/run/:/host/var/run/
        - ../chaincode/:/opt/gopath/src/github.com/
        - ./crypto-config:/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/
    networks:
        - basic
    #depends_on:
    #  - orderer.example.com
    #  - peer0.org1.example.com
    #  - couchdb

hyperledger Explorer在启动后仅显示空白页

0 个答案: