sakis3g配置问题ttyS1

Question

是杰森（Jayson）-我目前正在努力检测华硕Tinker板上的串行调制解调器，并将其连接到UART1，希望是ttyS1。

所以，我使用sakis3g这样连接到串行1。它会寻找usbinterface“ 0”，所以我更改了config，内联...

install sakis3g

linaro@tinkerboard:~$ sudo apt-get install libusb-1.0-0-dev                     
linaro@tinkerboard:~$ sudo cp /usr/include/libusb-1.0/libusb.h /usr/include  
linaro@tinkerboard:~$ sudo git clone https://github.com/Trixarian/sakis3g-source.git 
linaro@tinkerboard:~$ cd sakis3g-source
linaro@tinkerboard:~$ sudo ./compile
linaro@tinkerboard:~$ sudo cp build/sakis3gz /usr/bin/sakis3g

linaro@tinkerboard:~$ sudo passwd root

#set password for root and use in sakis3g`

run sakis3g

linaro@tinkerboard:~$ sudo sakis3g connect --console APN="CUSTOM_APN" OTHER="CUSTOM_TTY" CUSTOM_TTY="/dev/ttyS1" CUSTOM_APN="PRODATA"
Failed to detect driver of interface 0.
Failed to connect.
linaro@tinkerboard:~$

由于某种原因，当我显然需要阅读Asus TinkerBoard上的Uart1的ttyS1 ....时，它正在寻找接口“ 0”。