我正在研究Linux内核模块（已卸载KVM和KVM_intel）以测试英特尔的VMX功能。 现在我想知道进入VMX根模式的先决条件。 我的内核模块使用Linux文件系统接口为用户空间程序提供设备接口来进行VMX操作 以下是供参考的代码（来自https://www.cs.usfca.edu/~cruse/cs686s07/nmiexits.c，并更改为使用我的Linux-2.6.32，其他所需文件也来自该链接）
//-------------------------------------------------------------------
// nmiexits.c (A modification of our 'linuxvmm.c' module)
//
// This Linux kernel module implements a device-driver (named
// '/dev/vmm') which lets an application program execute some
// real-mode code in Virtual-8086 mode within a guest virtual
// machine, assuming the cpu supports Intel VMX instructions.
//
// This modification sets the pin-based VM Execution Controls
// so that control passes to our Virtual Machine Manager when
// any external interrupt (or non-maskable interrupt) occurs.
// These asynchronous events are then serviced by Linux ISRs,
// and our guest VM is resumed. For the case of non-maskable
// interrupts, the host executes the 'int $0x02' instruction;
// for the case of external interrupts, the appropriate Linux
// interrupt service routine automatically gets executed when
// the host executes 'sti', which allows the CPU to recognize
// the still-pending external interrupt-request.
//
// compile using: $ mmake nmiexits
// install using: $ /sbin/insmod nmiexits.ko
//
// NOTE: Written and tested using Linux x86_64 kernel 2.6.17.
//
// programmer: ALLAN CRUSE
// date begun: 29 APR 2007
// completion: 03 MAY 2007 -- our initial driver-prototype
// revised on: 14 MAY 2007 -- sets 'interrupt-exiting' control
// revised on: 24 MAY 2007 -- sets the 'NMI-exiting' control
// revised on: 21 JUL 2008 -- for Linux kernel version 2.6.26.
//-------------------------------------------------------------------
#include <linux/kernel.h>
#include <linux/module.h> // for init_module()
#include <linux/proc_fs.h> // for create_proc_read_entry()
#include <linux/fs.h> // for struct file_operations
#include <asm/io.h> // for virt_to_phys()
#include <asm/uaccess.h> // for copy_from_user()
#include <linux/slab.h> // for init_module()
#include <linux/mm.h> // for remap_pfn_range()
#include <linux/seq_file.h>
#include "machine.h" // for our VMCS fields
#include "myvmx.h" // for 'regs_ia32'
#define N_ARENAS 11 // number of 64KB memory allocations
#define ARENA_LENGTH (64<<10) // size of each allocated memory-arena
#define IA32_VMX_BASIC 0x0480
#define IA32_VMX_PINBASED_CTLS 0x0481
#define IA32_VMX_PROCBASED_CTLS 0x0482
#define IA32_VMX_EXIT_CTLS 0x0483
#define IA32_VMX_ENTRY_CTLS 0x0484
#define IA32_VMX_MISC 0x0485
#define IA32_VMX_CR0_FIXED0 0x0486
#define IA32_VMX_CR0_FIXED1 0x0487
#define IA32_VMX_CR4_FIXED0 0x0488
#define IA32_VMX_CR4_FIXED1 0x0489
#define IA32_VMX_VMCS_ENUM 0x048A
#define IA32_VMX_PROCBASED_CTLS2 0x048B
#define IA32_VMX_EPT_VPID_CAP 0x048C
#define IA32_VMX_TRUE_PINBASED_CTLS 0x048D
#define IA32_VMX_TRUE_PROCBASED_CTLS 0x048E
#define IA32_VMX_TRUE_EXIT_CTLS 0x048F
#define IA32_VMX_TRUE_ENTRY_CTLS 0x0490
#define NUM_VMX_MSR (IA32_VMX_TRUE_ENTRY_CTLS - IA32_VMX_BASIC + 1)
#define LEGACY_REACH 0x110000 // end of 'real-addressible' memory
#define PAGE_DIR_OFFSET 0x2000
#define PAGE_TBL_OFFSET 0x3000
#define IDT_KERN_OFFSET 0x4000
#define GDT_KERN_OFFSET 0x4800
#define LDT_KERN_OFFSET 0x4A00
#define TSS_KERN_OFFSET 0x4C00
#define TOS_KERN_OFFSET 0x8000
#define ISR_KERN_OFFSET 0x8000
#define __SELECTOR_TASK 0x0008
#define __SELECTOR_LDTR 0x0010
#define __SELECTOR_CODE 0x0004
#define __SELECTOR_DATA 0x000C
#define __SELECTOR_VRAM 0x0014
#define __SELECTOR_FLAT 0x001C
char modname[] = "nmiexits";
int my_major = 88;
char cpu_oem[16];
int cpu_features;
void *kmem[ N_ARENAS ];
unsigned long msr0x480[ NUM_VMX_MSR ];
unsigned long cr0, cr4;
unsigned long msr_efer;
unsigned long vmxon_region;
unsigned long guest_region;
unsigned long pgdir_region;
unsigned long pgtbl_region;
unsigned long g_IDT_region;
unsigned long g_GDT_region;
unsigned long g_LDT_region;
unsigned long g_TSS_region;
unsigned long g_TOS_region;
unsigned long g_ISR_region;
//============================================================
long my_ioctl( struct file *, unsigned int, unsigned long );
int my_release ( struct inode *inode, struct file *file );
int my_mmap( struct file *file, struct vm_area_struct *vma )
{
unsigned long user_virtaddr = vma->vm_start;
unsigned long region_length = vma->vm_end - vma->vm_start;
unsigned long physical_addr, pfn;
int i;
// we require prescribed parameter-values from our client
if ( user_virtaddr != 0x00000000L ) return -EINVAL;
if ( region_length != LEGACY_REACH ) return -EINVAL;
// let the kernel know not to try swapping out this region
/// vma->vm_flags |= VM_RESERVED;
// ask the kernel to add page-table entries to 'map' these arenas
for (i = 0; i < N_ARENAS+6; i++)
{
int j = i % 16;
if ( j < 0xA ) physical_addr = virt_to_phys( kmem[ j ] );
else physical_addr = user_virtaddr;
pfn = ( physical_addr >> PAGE_SHIFT );
if ( remap_pfn_range( vma, user_virtaddr, pfn,
ARENA_LENGTH, vma->vm_page_prot ) ) return -EAGAIN;
user_virtaddr += ARENA_LENGTH;
}
// copy page-frame 0x000 to bottom of arena 0x0 (for IVT and BDA)
memcpy( kmem[0], phys_to_virt( 0x00000 ), PAGE_SIZE );
// copy page-frames 0x90 to 0x9F to arena 0x9 (for EBDA)
memcpy( kmem[9], phys_to_virt( 0x90000 ), ARENA_LENGTH );
return 0; // SUCCESS
}
struct file_operations
my_fops = {
owner: THIS_MODULE,
.unlocked_ioctl= my_ioctl,
mmap: my_mmap,
.release = my_release,
};
void set_CR4_vmxe( void *dummy )
{
asm( " mov %%cr4, %%rax \n"\
" bts $13, %%rax \n"\
" mov %%rax, %%cr4 " ::: "ax" );
}
void clear_CR4_vmxe( void *dummy )
{
asm( " mov %%cr4, %%rax \n"\
" btr $13, %%rax \n"\
" mov %%rax, %%cr4 " ::: "ax" );
}
static inline u64
vmx_rdmsr (u32 ecx)
{
u32 edx, eax;
asm volatile ("rdmsr":"=d" (edx), "=a" (eax):"c" (ecx));
return (((u64) edx) << 32) | ((u64) eax);
}
static inline void
vmx_wrmsr (u32 ecx, u64 val)
{
u32 edx, eax;
edx = (u32) (val >> 32);
eax = (u32) val;
asm volatile ("wrmsr"::"d" (edx), "a" (eax), "c" (ecx));
}
int init_module( void )
{
int i, j;
// confirm installation and show device-major number
printk( "<1>\nInstalling \'%s\' module ", modname );
printk( "(major=%d) \n", my_major );
// verify processor supports Intel Virtualization Technology
asm( " xor %%eax, %%eax \n"\
" cpuid \n"\
" mov %%ebx, cpu_oem+0 \n"\
" mov %%edx, cpu_oem+4 \n"\
" mov %%ecx, cpu_oem+8 \n"\
::: "ax", "bx", "cx", "dx" );
printk( " processor is \'%s\' \n", cpu_oem );
if ( strncmp( cpu_oem, "GenuineIntel", 12 ) == 0 )
asm( " mov $1, %%eax \n"\
" cpuid \n"\
" mov %%ecx, cpu_features \n"\
::: "ax", "bx", "cx", "dx" );
if ( ( cpu_features & (1<<5) ) == 0 )
{
printk( " Virtualization Technology is unsupported \n" );
return -ENODEV;
}
else printk( " Virtualization Technology is supported \n" );
// read contents of the VMX-Capability Model-Specific Registers
asm( " xor %%rbx, %%rbx \n"\
" mov %0, %%rcx \n"\
"nxcap: \n"\
" rdmsr \n"\
" mov %%eax, msr0x480+0(, %%rbx, 8) \n"\
" mov %%edx, msr0x480+4(, %%rbx, 8) \n"\
" inc %%rcx \n"\
" inc %%rbx \n"\
" cmp $17, %%rbx \n"\
" jb nxcap \n"\
:: "i" (IA32_VMX_BASIC) : "ax", "bx", "cx", "dx" );
// preserve the initial values in relevant system registers
asm( " mov %%cr0, %%rax \n mov %%rax, cr0 " ::: "ax" );
asm( " mov %%cr4, %%rax \n mov %%rax, cr4 " ::: "ax" );
asm( " mov %0, %%ecx \n"\
" rdmsr \n"\
" mov %%eax, msr_efer+0 \n"\
" mov %%edx, msr_efer+4 \n"\
:: "i" (MSR_EFER) : "ax", "cx", "dx" );
// allocate page-aligned blocks of non-pageable kernel memory
for (i = 0; i < N_ARENAS; i++)
{
kmem[ i ] = kmalloc( ARENA_LENGTH, GFP_KERNEL );
if ( kmem[ i ] == NULL )
{
for (j = 0; j < i; j++) kfree( kmem[ j ] );
return -ENOMEM;
}
else memset( kmem[ i ], 0x00, ARENA_LENGTH );
}
// assign usages to allocated kernel memory areas
vmxon_region = virt_to_phys( kmem[ 10 ] + 0x0000 );
guest_region = virt_to_phys( kmem[ 10 ] + 0x1000 );
pgdir_region = virt_to_phys( kmem[ 10 ] + PAGE_DIR_OFFSET );
pgtbl_region = virt_to_phys( kmem[ 10 ] + PAGE_TBL_OFFSET );
g_IDT_region = virt_to_phys( kmem[ 10 ] + IDT_KERN_OFFSET );
g_GDT_region = virt_to_phys( kmem[ 10 ] + GDT_KERN_OFFSET );
g_LDT_region = virt_to_phys( kmem[ 10 ] + LDT_KERN_OFFSET );
g_TSS_region = virt_to_phys( kmem[ 10 ] + TSS_KERN_OFFSET );
g_TOS_region = virt_to_phys( kmem[ 10 ] + TOS_KERN_OFFSET );
g_ISR_region = virt_to_phys( kmem[ 10 ] + ISR_KERN_OFFSET );
return register_chrdev( my_major, modname, &my_fops );
}
void cleanup_module( void )
{
int i;
smp_call_function( clear_CR4_vmxe, NULL, 1 );
clear_CR4_vmxe( NULL );
unregister_chrdev( my_major, modname );
for (i = 0; i < N_ARENAS; i++) kfree( kmem[ i ] );
printk( "<1>Removing \'%s\' module\n", modname );
}
MODULE_LICENSE("GPL");
unsigned short _gdtr[ 5 ], _idtr[ 5 ];
unsigned int _eax, _ebx, _ecx, _edx, _esp, _ebp, _esi, _edi;
int retval = -1;
int nmiints = 0;
int extints = 0;
regs_ia32 vm;
long my_ioctl( struct file *file, unsigned int count, unsigned long buf)
{
unsigned long *gdt, *ldt, *idt;
unsigned int *pgtbl, *pgdir, *tss, phys_addr = 0;
signed long desc = 0;
int i, j;
// sanity check: we require the client-process to pass an
// exact amount of data representing CPU's register-state
if ( count != sizeof( regs_ia32 ) ) return -EINVAL;
// reinitialize the Virtual Machine Control Stuctures
memset( phys_to_virt( vmxon_region ), 0x00, PAGE_SIZE );
memset( phys_to_virt( guest_region ), 0x00, PAGE_SIZE );
memcpy( phys_to_virt( vmxon_region ), msr0x480, 4 );
memcpy( phys_to_virt( guest_region ), msr0x480, 4 );
// initialize our guest-task's page-table and page-directory
pgtbl = (unsigned int*)phys_to_virt( pgtbl_region );
for (i = 0; i < 18; i++) {
switch ( i ) {
case 0: case 1: case 2: case 3: case 4:
case 5: case 6: case 7: case 8: case 9:
phys_addr = virt_to_phys( kmem[ i ] ); break;
case 10: case 11: case 12: case 13: case 14: case 15:
phys_addr = i * ARENA_LENGTH; break;
case 16:
phys_addr = virt_to_phys( kmem[ 0 ] ); break;
case 17:
phys_addr = virt_to_phys( kmem[ 10 ] ); break;
}
for (j = 0; j < 16; j++)
pgtbl[ i*16 + j ] = phys_addr + (j << PAGE_SHIFT) + 7;
}
pgdir = (unsigned int*)phys_to_virt( pgdir_region );
pgdir[ 0 ] = (unsigned int)pgtbl_region + 7;
// copy the client's virtual-machine register-values
if ( copy_from_user( &vm, (void*)buf, count ) ) return -EFAULT;
guest_ES_selector = vm.es;
guest_CS_selector = vm.cs;
guest_SS_selector = vm.ss;
guest_DS_selector = vm.ds;
guest_FS_selector = vm.fs;
guest_GS_selector = vm.gs;
_eax = vm.eax;
_ebx = vm.ebx;
_ecx = vm.ecx;
_edx = vm.edx;
_ebp = vm.ebp;
_esi = vm.esi;
_edi = vm.edi;
guest_RSP = vm.esp;
guest_RIP = vm.eip;
guest_RFLAGS = vm.eflags;
guest_RFLAGS |= (1 << 17); // VM=1 (for Virtual-8086 mode)
guest_RFLAGS |= (1 << 1); // it's essential to set bit #1
// setup other guest-state fields (for Virtual-8086 mode)
guest_ES_base = (guest_ES_selector << 4);
guest_CS_base = (guest_CS_selector << 4);
guest_SS_base = (guest_SS_selector << 4);
guest_DS_base = (guest_DS_selector << 4);
guest_FS_base = (guest_FS_selector << 4);
guest_GS_base = (guest_GS_selector << 4);
guest_ES_limit = 0xFFFF;
guest_CS_limit = 0xFFFF;
guest_SS_limit = 0xFFFF;
guest_DS_limit = 0xFFFF;
guest_FS_limit = 0xFFFF;
guest_GS_limit = 0xFFFF;
guest_ES_access_rights = 0xF3;
guest_CS_access_rights = 0xF3;
guest_SS_access_rights = 0xF3;
guest_DS_access_rights = 0xF3;
guest_FS_access_rights = 0xF3;
guest_GS_access_rights = 0xF3;
guest_CR0 = 0x80000031;
guest_CR4 = 0x00002011;
guest_CR3 = pgdir_region;
guest_VMCS_link_pointer_full = 0xFFFFFFFF;
guest_VMCS_link_pointer_high = 0xFFFFFFFF;
guest_IDTR_base = LEGACY_REACH + IDT_KERN_OFFSET;
guest_GDTR_base = LEGACY_REACH + GDT_KERN_OFFSET;
guest_LDTR_base = LEGACY_REACH + LDT_KERN_OFFSET;
guest_TR_base = LEGACY_REACH + TSS_KERN_OFFSET;
guest_IDTR_limit = (256 * 8) - 1;
guest_GDTR_limit = (3 * 8) - 1;
guest_LDTR_limit = (4 * 8) - 1;
guest_TR_limit = (26 * 4) + 0x20 + 0x2000;
guest_LDTR_access_rights = 0x82;
guest_TR_access_rights = 0x8B;
guest_LDTR_selector = __SELECTOR_LDTR;
guest_TR_selector = __SELECTOR_TASK;
// provisionally initialize our guest-task's LDTR
ldt = (unsigned long*)phys_to_virt( g_LDT_region );
ldt[ __SELECTOR_CODE >> 3 ] = 0x00CF9B000000FFFF;
ldt[ __SELECTOR_DATA >> 3 ] = 0x00CF93000000FFFF;
ldt[ __SELECTOR_VRAM >> 3 ] = 0x0000920B8000FFFF;
ldt[ __SELECTOR_FLAT >> 3 ] = 0x008F92000000FFFF;
// Adjust the CODE and DATA descriptors here
desc = LEGACY_REACH + ISR_KERN_OFFSET;
desc <<= 16;
desc &= 0x000000FFFFFF0000;
ldt[ __SELECTOR_CODE >> 3 ] |= desc;
ldt[ __SELECTOR_DATA >> 3 ] |= desc;
// initialize our guest-task's GDTR
gdt = (unsigned long*)phys_to_virt( g_GDT_region );
desc = 0x00008B0000000000;
desc |= (guest_TR_base << 32)&0xFF00000000000000;
desc |= (guest_TR_base << 16)&0x000000FFFFFF0000;
desc |= (guest_TR_limit & 0xFFFF);
gdt[ __SELECTOR_TASK >> 3 ] = desc;
desc = 0x0000820000000000;
desc |= ( guest_LDTR_base << 32)&0xFF00000000000000;
desc |= ( guest_LDTR_base << 16)&0x000000FFFFFF0000;
desc |= ( guest_LDTR_limit & 0xFFFF );
gdt[ __SELECTOR_LDTR >> 3 ] = desc;
// initialize our guest's IDT
idt = (unsigned long*)phys_to_virt( g_IDT_region );
desc = 0; // offset-address for GPF isr
desc &= 0x00000000FFFFFFFF;
desc |= (desc << 32);
desc &= 0xFFFF00000000FFFF;
desc |= ( __SELECTOR_CODE << 16);
desc |= 0x00008E0000000000;
idt[ 13 ] = desc;
// initialize our guest's Task-State Segment
tss = (unsigned int*)phys_to_virt( g_TSS_region );
tss[ 1 ] = TOS_KERN_OFFSET;
tss[ 2 ] = __SELECTOR_DATA;
tss[ 25 ] = 0x00880000;
tss[ guest_TR_limit >> 2 ] = 0xFF;
//----------------------------------------------------
// initialize the global variables for the host state
//----------------------------------------------------
asm(" mov %%cr0, %%rax \n mov %%rax, host_CR0 " ::: "ax" );
asm(" mov %%cr4, %%rax \n mov %%rax, host_CR4 " ::: "ax" );
asm(" mov %%cr3, %%rax \n mov %%rax, host_CR3 " ::: "ax" );
asm(" str host_TR_selector ");
asm(" mov %es, host_ES_selector ");
asm(" mov %cs, host_CS_selector ");
asm(" mov %ss, host_SS_selector ");
asm(" mov %ds, host_DS_selector ");
asm(" mov %fs, host_FS_selector ");
asm(" mov %gs, host_GS_selector ");
asm(" sgdt _gdtr \n sidt _idtr ");
host_GDTR_base = *(unsigned long*)( _gdtr+1 );
host_IDTR_base = *(unsigned long*)( _idtr+1 );
gdt = (unsigned long*)host_GDTR_base;
desc = gdt[ (host_TR_selector >> 3) + 0 ];
host_TR_base = ((desc >> 16)&0x00FFFFFF)|((desc >> 32)&0xFF000000);
desc = gdt[ (host_TR_selector >> 3) + 1 ];
desc <<= 48; // maneuver to insure 'canonical' address
host_TR_base |= (desc >> 16)&0xFFFFFFFF00000000;
asm( " mov $0x174, %%ecx \n"\
" rdmsr \n"\
" mov %%eax, host_SYSENTER_CS \n"\
" inc %%ecx \n"\
" rdmsr \n"\
" mov %%eax, host_SYSENTER_ESP+0 \n"\
" mov %%edx, host_SYSENTER_ESP+4 \n"\
" inc %%ecx \n"\
" rdmsr \n"\
" mov %%eax, host_SYSENTER_EIP+0 \n"\
" mov %%edx, host_SYSENTER_EIP+4 \n"\
::: "ax", "cx", "dx" );
asm( " mov %0, %%ecx \n"\
" rdmsr \n"\
" mov %%eax, host_FS_base+0 \n"\
" mov %%edx, host_FS_base+4 \n"\
:: "i" (0xC0000100) : "ax", "cx", "dx" );
asm( " mov %0, %%ecx \n"\
" rdmsr \n"\
" mov %%eax, host_GS_base+0 \n"\
" mov %%edx, host_GS_base+4 \n"\
:: "i" (0xC0000101) : "ax", "cx", "dx" );
//------------------------------------------------------
// initialize the global variables for the VMX controls
//------------------------------------------------------
control_VMX_pin_based = msr0x480[ 1 ];
control_VMX_cpu_based = msr0x480[ 2 ];
control_VM_exit_controls = msr0x480[ 3 ];
control_VM_entry_controls = msr0x480[ 4 ];
control_VMX_pin_based |= (1 << 0); // exit on interrupts
control_VMX_pin_based |= (1 << 3); // NMI-exiting
control_VMX_cpu_based |= (1 << 7) | (1 << 29); // Hlt + Monitor exit
control_pagefault_errorcode_match = 0xFFFFFFFF;
control_VM_exit_controls |= (1 << 9); // exit to 64-bit host
control_CR0_mask = 0x80000021;
control_CR4_mask = 0x00002000;
control_CR0_shadow = 0x80000021;
control_CR4_shadow = 0x00002000;
control_CR3_target_count = 2;
control_CR3_target0 = guest_CR3; // guest's directory
control_CR3_target1 = host_CR3; // host's directory
// initialize our counters for NMIs and external interrupts
nmiints = 0;
extints = 0;
// enable virtual machine extensions (bit 13 in CR4)
set_CR4_vmxe( NULL );
smp_call_function( set_CR4_vmxe, NULL, 1 );
//---------------------
// launch the guest VM
//---------------------
asm volatile (" .type my_vmm, @function \n"\
" pushfq \n"\
" push %rax \n"\
" push %rbx \n"\
" push %rcx \n"\
" push %rdx \n"\
" push %rbp \n"\
" push %rsi \n"\
" push %rdi \n"\
" push %r11 \n"\
" \n"\
" lea my_vmm, %rax \n"\
" \n"\
" mov %rax, host_RIP \n"\
" mov %rsp, host_RSP \n"\
" \n"\
" vmxon vmxon_region \n"\
" jc fail \n"\
" jz over \n"\
" \n"\
" movl $1, retval \n"\
" vmclear guest_region \n"\
" \n"\
" movl $2, retval \n"\
" vmptrld guest_region \n"\
" \n"\
" movl $3, retval \n"\
" \n"\
" xor %rdx, %rdx \n"\
" mov elements, %rcx \n"\
"nxwr: \n"\
" mov machine+0(%rdx), %rax \n"\
" mov machine+8(%rdx), %rbx \n"\
" vmwrite (%rbx), %rax \n"\
" add $16, %rdx \n"\
" loop nxwr \n"\
" \n"\
" movl $4, retval \n"\
" mov _eax, %eax \n"\
" mov _ebx, %ebx \n"\
" mov _ecx, %ecx \n"\
" mov _edx, %edx \n"\
" mov _ebp, %ebp \n"\
" mov _esi, %esi \n"\
" mov _edi, %edi \n"\
" vmlaunch \n"\
" movl $5, retval \n"\
" jmp read \n"\
"my_vmm: \n"\
" \n"\
" mov %eax, _eax \n"\
" mov %ebx, _ebx \n"\
" mov %ecx, _ecx \n"\
" mov %edx, _edx \n"\
" mov %ebp, _ebp \n"\
" mov %esi, _esi \n"\
" mov %edi, _edi \n"\
"read: \n"\
" xor %rdx, %rdx \n"\
" mov rocount, %rcx \n"\
"nxrd: \n"\
" mov results+0(%rdx), %rax \n"\
" mov results+8(%rdx), %rbx \n"\
" vmread %rax, (%rbx) \n"\
" add $16, %rdx \n"\
" loop nxrd \n"\
" \n"\
" cmpl $0, info_vmexit_reason \n"\
" je was_nmi \n"\
" \n"\
" cmpl $1, info_vmexit_reason \n"\
" je was_extint \n"\
" \n"\
" jmp over \n"\
" \n"\
"was_nmi: \n"\
" incl nmiints \n"\
/* " int $0x02 \n"\
*/ " jmp resume_guest \n"\
" \n"\
"was_extint: \n"\
" sti \n"\
" incl extints \n"\
" \n"\
"resume_guest: \n"\
" mov _eax, %eax \n"\
" mov _ebx, %ebx \n"\
" mov _ecx, %ecx \n"\
" mov _edx, %edx \n"\
" mov _ebp, %ebp \n"\
" mov _esi, %esi \n"\
" mov _edi, %edi \n"\
" vmresume \n"\
" \n"\
" movl $-1, retval \n"\
"over: \n"\
" vmxoff \n"\
"fail: \n"\
" pop %r11 \n"\
" pop %rdi \n"\
" pop %rsi \n"\
" pop %rbp \n"\
" pop %rdx \n"\
" pop %rcx \n"\
" pop %rbx \n"\
" pop %rax \n"\
" popfq \n"\
);
// show why the VMentry failed, or else why the VMexit occurred
printk( "\n VM-instruction error: %d ", info_vminstr_error );
printk( " Exit Reason: %d \n", info_vmexit_reason );
printk( " VMexit-interruption-information: %08X \n",
info_vmexit_interrupt_information );
printk( " VMexit-interruption-error-code: %08X \n",
info_vmexit_interrupt_error_code );
if (retval >= 0) {
retval = info_vmexit_reason;
}
// display the number of external interruption-exits
printk( "\n" );
printk( " number of external interrupts = %d \n", extints );
printk( " number of non-maskable interrupts = %d \n", nmiints );
// copy the client's virtual-machine register-values
vm.eflags = (unsigned int)guest_RFLAGS;
vm.eip = (unsigned int)guest_RIP;
vm.esp = (unsigned int)guest_RSP;
vm.eax = _eax;
vm.ebx = _ebx;
vm.ecx = _ecx;
vm.edx = _edx;
vm.ebp = _ebp;
vm.esi = _esi;
vm.edi = _edi;
vm.es = guest_ES_selector;
vm.cs = guest_CS_selector;
vm.ss = guest_SS_selector;
vm.ds = guest_DS_selector;
vm.fs = guest_FS_selector;
vm.gs = guest_GS_selector;
if ( copy_to_user( (void*)buf, &vm, count ) ) return -EFAULT;
return retval;
}
int my_release ( struct inode *inode, struct file *file )
{
pr_info("Calling %s\n", __func__);
/*
smp_call_function( clear_CR4_vmxe, NULL, 1 );
clear_CR4_vmxe( NULL );
*/
retval = 0;
return 0;
}
通过使用delay.cpp测试上面的代码，我发现VMlaunch第一次失败，VMX指令错误为8（无效的主机状态），所有后续的VMX操作都没问题。
调试后，我发现它与在CR4中设置和清除VMXE（bit13）的位置有关。
如果在init_module中设置VMXE位，则每次都可以很好地启动VM，没有错误为8。
然后，如果清除my_release中的VMXE位，则VMX操作每次都会失败（因此我注释掉了该操作）。
我必须错过一些关于输入VMX根操作的重要信息。
我的测试环境是VMware WS，以及裸机Ubuntu Linux主机 我在SMP主机和非SMP主机上测试得到了相同的结果。