我正在尝试构建https://github.com/olajep/parallella-fpga/tree/2016.11项目。 在我克隆它之后，我试图运行＆＃34; make＆＃34; parallella-fpga文件夹中的命令，但我在终端中收到此消息：
make -C AdiHDLLib/ lib
make[1]: Entering directory '/home/hadi/Vivado/project/parallella-fpga/AdiHDLLib'
make -C library/ all
make[2]: Entering directory '/home/hadi/Vivado/project/parallella-fpga/AdiHDLLib/library'
make -C axi_clkgen
make[3]: Entering directory '/home/hadi/Vivado/project/parallella-fpga/AdiHDLLib/library/axi_clkgen'
rm -rf *.cache *.data *.xpr *.log component.xml *.jou xgui .Xil
vivado -mode batch -source axi_clkgen_ip.tcl >> axi_clkgen_ip.log 2>&1
Makefile:43: recipe for target 'axi_clkgen.xpr' failed
make[3]: *** [axi_clkgen.xpr] Error 1
make[3]: Leaving directory '/home/hadi/Vivado/project/parallella-fpga/AdiHDLLib/library/axi_clkgen'
Makefile:96: recipe for target 'lib' failed
make[2]: [lib] Error 2 (ignored)
make -C axi_hdmi_tx
make[3]: Entering directory '/home/hadi/Vivado/project/parallella-fpga/AdiHDLLib/library/axi_hdmi_tx'
rm -rf *.cache *.data *.xpr *.log component.xml *.jou xgui .Xil
vivado -mode batch -source axi_hdmi_tx_ip.tcl >> axi_hdmi_tx_ip.log 2>&1
Makefile:55: recipe for target 'axi_hdmi_tx.xpr' failed
make[3]: *** [axi_hdmi_tx.xpr] Error 1
make[3]: Leaving directory '/home/hadi/Vivado/project/parallella-fpga/AdiHDLLib/library/axi_hdmi_tx'
Makefile:96: recipe for target 'lib' failed
make[2]: [lib] Error 2 (ignored)
make -C axi_spdif_tx
make[3]: Entering directory '/home/hadi/Vivado/project/parallella-fpga/AdiHDLLib/library/axi_spdif_tx'
rm -rf *.cache *.data *.xpr *.log component.xml *.jou xgui .Xil
vivado -mode batch -source axi_spdif_tx_ip.tcl >> axi_spdif_tx_ip.log 2>&1
Makefile:45: recipe for target 'axi_spdif_tx.xpr' failed
make[3]: *** [axi_spdif_tx.xpr] Error 1
make[3]: Leaving directory '/home/hadi/Vivado/project/parallella-fpga/AdiHDLLib/library/axi_spdif_tx'
Makefile:96: recipe for target 'lib' failed
make[2]: [lib] Error 2 (ignored)
make[2]: Leaving directory '/home/hadi/Vivado/project/parallella-fpga/AdiHDLLib/library'
make[1]: Leaving directory '/home/hadi/Vivado/project/parallella-fpga/AdiHDLLib'
make -C oh/src/parallella/fpga/parallella_base all
make[1]: Entering directory '/home/hadi/Vivado/project/parallella-fpga/oh/src/parallella/fpga/parallella_base'
vivado -mode batch -source run.tcl
****** Vivado v2015.2 (64-bit)
**** SW Build 1266856 on Fri Jun 26 16:35:25 MDT 2015
**** IP Build 1264090 on Wed Jun 24 14:22:01 MDT 2015
** Copyright 1986-2015 Xilinx, Inc. All Rights Reserved.
source run.tcl
# source ./system_params.tcl
## set design parallella_base
## set projdir ./
## set root "../../.."
## set partname "xc7z020clg400-1"
## set hdl_files [list \
## $root/parallella/hdl \
## $root/common/hdl/ \
## $root/emesh/hdl \
## $root/emmu/hdl \
## $root/axi/hdl \
## $root/emailbox/hdl \
## $root/edma/hdl \
## $root/elink/hdl \
## ]
## set ip_files [list \
## $root/xilibs/ip/fifo_async_104x32.xci \
## ]
## set constraints_files []
# source ../../../common/fpga/create_ip.tcl
## create_project -force $design $projdir -part $partname
## set_property target_language Verilog [current_project]
## set_property source_mgmt_mode None [current_project]
## if {[string equal [get_filesets -quiet sources_1] ""]} {
## create_fileset -srcset sources_1
## }
## add_files -norecurse -fileset [get_filesets sources_1] $hdl_files
## set_property top $design [get_filesets sources_1]
## if {[string equal [get_filesets -quiet constraints_1] ""]} {
## create_fileset -constrset constraints_1
## }
## if {[llength $constraints_files] != 0} {
## add_files -norecurse -fileset [get_filesets constraints_1] $constraints_files
## }
## if {[llength $ip_files] != 0} {
##
## #Add to fileset
## add_files -norecurse -fileset [get_filesets sources_1] $ip_files
##
## #Set mode for IP
## foreach file $ip_files {
## #TODO: is this needed?
## set file_obj [get_files -of_objects [get_filesets sources_1] $file]
## set_property "synth_checkpoint_mode" "Singular" $file_obj
## }
## #RERUN/UPGRADE IP
## upgrade_ip [get_ips]
## }
INFO: [IP_Flow 19-234] Refreshing IP repositories
INFO: [IP_Flow 19-1704] No user IP repositories specified
INFO: [IP_Flow 19-2313] Loaded Vivado IP repository '/opt/Xilinx/Vivado/2015.2/data/ip'.
WARNING: [Coretcl 2-1044] No upgrade is available for 'fifo_async_104x32'
WARNING: [Coretcl 2-1042] No IP was identified for upgrade.
## ipx::package_project -import_files -force -root_dir $projdir
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/common/hdl/oh_mux12.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/common/hdl/oh_clockor.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/common/hdl/oh_ser2par.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/common/hdl/oh_edgedetect.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/common/hdl/oh_clockgate.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/common/hdl/oh_parity.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/common/hdl/oh_pll.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/common/hdl/oh_crc32_64b.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/common/hdl/oh_pwr_isohi.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/common/hdl/oh_bin2onehot.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/common/hdl/oh_mux.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/common/hdl/oh_datagate.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/common/hdl/oh_csa92.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/common/hdl/oh_7seg_decode.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/common/hdl/oh_tristate.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/common/hdl/oh_iddr.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/common/hdl/oh_debouncer.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/common/hdl/oh_stretcher.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/common/hdl/oh_mux6.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/common/hdl/oh_reg1.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/common/hdl/oh_edge2pulse.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/common/hdl/oh_counter.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/common/hdl/oh_mux8.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/common/hdl/oh_csa62.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/common/hdl/oh_mux5.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/common/hdl/oh_delay.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/common/hdl/oh_memory_sp.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/common/hdl/oh_clockmux.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/common/hdl/oh_crc.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/common/hdl/oh_pwr_isolo.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/common/hdl/oh_bitreverse.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/common/hdl/oh_par2ser.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/common/hdl/oh_reg0.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/common/hdl/oh_8b10b_decode.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/common/hdl/oh_csa42.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/common/hdl/oh_mux2.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/common/hdl/oh_add.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/common/hdl/oh_pulse2pulse.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/common/hdl/oh_pwr_gate.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/common/hdl/oh_shifter.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/common/hdl/oh_crc32_8b.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/common/hdl/oh_lat0.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/common/hdl/oh_oddr.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/common/hdl/oh_standby.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/common/hdl/oh_rise2pulse.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/common/hdl/oh_mux7.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/common/hdl/oh_clockdiv.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/common/hdl/oh_8b10b_encode.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/common/hdl/oh_fall2pulse.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/common/hdl/cfg_generic.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/common/hdl/oh_lat1.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/common/hdl/oh_abs.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/common/hdl/oh_mux9.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/common/hdl/oh_csa32.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/common/hdl/oh_pwr_buf.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/emesh/hdl/emesh_readback.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/emesh/hdl/emesh_wralign.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/emesh/hdl/emesh_constants.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/emesh/hdl/ememory.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/emesh/hdl/emesh_rdalign.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/emesh/hdl/emesh_if.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/emesh/hdl/emesh_mux.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/edma/hdl/edma_ctrl.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/edma/hdl/edma_dp.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/edma/hdl/edma.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/edma/hdl/edma_regmap.vh'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/edma/hdl/edma_regs.v'.
WARNING: [IP_Flow 19-3833] Not packaging sources file marked as disabled: '/home/hadi/Vivado/project/parallella-fpga/oh/src/elink/hdl/ecfg_if.v'.
WARNING: [IP_Flow 19-3899] Cannot get the environment domain name variable for the component vendor name. Setting the vendor name to 'user.org'.
INFO: [IP_Flow 19-2228] Inferred bus interface "m_axi" of definition type "xilinx.com:interface:aximm:1.0".
INFO: [IP_Flow 19-2228] Inferred bus interface "s_axi" of definition type "xilinx.com:interface:aximm:1.0".
INFO: [IP_Flow 19-2228] Inferred bus interface "m_axi_aresetn" of definition type "xilinx.com:signal:reset:1.0".
INFO: [IP_Flow 19-2228] Inferred bus interface "s_axi_aresetn" of definition type "xilinx.com:signal:reset:1.0".
INFO: [IP_Flow 19-2228] Inferred bus interface "mailbox_irq" of definition type "xilinx.com:signal:interrupt:1.0".
INFO: [IP_Flow 19-2228] Inferred bus interface "m_axi_aresetn" of definition type "xilinx.com:signal:reset:1.0".
INFO: [IP_Flow 19-2228] Inferred bus interface "s_axi_aresetn" of definition type "xilinx.com:signal:reset:1.0".
INFO: [IP_Flow 19-2228] Inferred bus interface "sys_clk" of definition type "xilinx.com:signal:clock:1.0".
## ipx::remove_memory_map {s_axi} [ipx::current_core]
## ipx::add_memory_map {s_axi} [ipx::current_core]
## ipx::associate_bus_interfaces -busif s_axi -clock sys_clk [ipx::current_core]
## ipx::associate_bus_interfaces -busif m_axi -clock sys_clk [ipx::current_core]
WARNING: command 'get_bus_interface' will be removed in the 2015.2 release, use 'get_bus_interfaces' instead
## set_property slave_memory_map_ref {s_axi} [ipx::get_bus_interface s_axi [ipx::current_core]]
WARNING: command 'get_memory_map' will be removed in the 2015.2 release, use 'get_memory_maps' instead
## ipx::add_address_block {axi_lite} [ipx::get_memory_map s_axi [ipx::current_core]]
WARNING: command 'get_memory_map' will be removed in the 2015.2 release, use 'get_memory_maps' instead
WARNING: command 'get_address_block' will be removed in the 2015.2 release, use 'get_address_blocks' instead
## set_property range {65536} [ipx::get_address_block axi_lite \
## [ipx::get_memory_map s_axi [ipx::current_core]]]
## set_property vendor {www.parallella.org} [ipx::current_core]
## set_property library {user} [ipx::current_core]
## set_property taxonomy {{/AXI_Infrastructure}} [ipx::current_core]
## set_property vendor_display_name {ADAPTEVA} [ipx::current_core]
## set_property company_url {www.parallella.org} [ipx::current_core]
## set_property supported_families { \
## {virtex7} {Production} \
## {qvirtex7} {Production} \
## {kintex7} {Production} \
## {kintex7l} {Production} \
## {qkintex7} {Production} \
## {qkintex7l} {Production} \
## {artix7} {Production} \
## {artix7l} {Production} \
## {aartix7} {Production} \
## {qartix7} {Production} \
## {zynq} {Production} \
## {qzynq} {Production} \
## {azynq} {Production} \
## } [ipx::current_core]
## ipx::archive_core [concat $design.zip] [ipx::current_core]
## exit
INFO: [Common 17-206] Exiting Vivado at Sat May 26 22:29:59 2018...
make[1]: Leaving directory '/home/hadi/Vivado/project/parallella-fpga/oh/src/parallella/fpga/parallella_base'
# remove old elink simulation for now vivado -mode batch -source elinkdv.tcl
vivado -mode batch -source 7020_hdmi.tcl
****** Vivado v2015.2 (64-bit)
**** SW Build 1266856 on Fri Jun 26 16:35:25 MDT 2015
**** IP Build 1264090 on Wed Jun 24 14:22:01 MDT 2015
** Copyright 1986-2015 Xilinx, Inc. All Rights Reserved.
source 7020_hdmi.tcl
# set origin_dir "."
# set orig_proj_dir "[file normalize "$origin_dir/7020_hdmi"]"
# open_project 7020_hdmi/7020_hdmi.xpr
INFO: [Project 1-313] Project file moved from '~/parallella/parallella-fpga' since last save.
Scanning sources...
Finished scanning sources
INFO: [Project 1-230] Project '7020_hdmi.xpr' upgraded for this version of Vivado.
INFO: [Project 1-265] Setting active simulation fileset to 'sim_1'.
# set proj_dir [get_property directory [current_project]]
# set obj [get_projects 7020_hdmi]
# set_property "default_lib" "xil_defaultlib" $obj
# set_property "part" "xc7z020clg400-1" $obj
# set_property "simulator_language" "Mixed" $obj
# if {[string equal [get_filesets -quiet sources_1] ""]} {
# create_fileset -srcset sources_1
# }
# set obj [get_filesets sources_1]
# set_property "ip_repo_paths" "[file normalize "$origin_dir/oh/src/parallella/fpga/parallella_base"] [file normalize "$origin_dir/AdiHDLLib"]" $obj
# update_ip_catalog -rebuild
INFO: [IP_Flow 19-234] Refreshing IP repositories
INFO: [IP_Flow 19-1700] Loaded user IP repository '/home/hadi/Vivado/project/parallella-fpga/oh/src/parallella/fpga/parallella_base'.
INFO: [IP_Flow 19-1700] Loaded user IP repository '/home/hadi/Vivado/project/parallella-fpga/AdiHDLLib'.
INFO: [IP_Flow 19-2313] Loaded Vivado IP repository '/opt/Xilinx/Vivado/2015.2/data/ip'.
# set obj [get_filesets sources_1]
# set files [list \
# "[file normalize "$orig_proj_dir/7020_hdmi.srcs/sources_1/bd/elink2_top/elink2_top.bd"]"\
# "[file normalize "$orig_proj_dir/7020_hdmi.srcs/sources_1/bd/elink2_top/hdl/elink2_top_wrapper.v"]"\
# "[file normalize "$orig_proj_dir/archive_project_summary.txt"]"\
# ]
# add_files -norecurse -fileset $obj $files
# set file "$orig_proj_dir/7020_hdmi.srcs/sources_1/bd/elink2_top/elink2_top.bd"
# set file [file normalize $file]
# set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]]
# if { ![get_property "is_locked" $file_obj] } {
# set_property "generate_synth_checkpoint" "0" $file_obj
# }
# set_property "used_in_simulation" "0" $file_obj
# set file "$orig_proj_dir/7020_hdmi.srcs/sources_1/bd/elink2_top/hdl/elink2_top_wrapper.v"
# set file [file normalize $file]
# set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]]
# set_property "used_in_simulation" "0" $file_obj
# set obj [get_filesets sources_1]
# set_property "top" "elink2_top_wrapper" $obj
# if {[string equal [get_filesets -quiet constrs_1] ""]} {
# create_fileset -constrset constrs_1
# }
# set obj [get_filesets constrs_1]
# set file "[file normalize "$orig_proj_dir/7020_hdmi.srcs/constrs_1/imports/constraints/parallella_timing.xdc"]"
# set file_added [add_files -norecurse -fileset $obj $file]
# set file "$orig_proj_dir/7020_hdmi.srcs/constrs_1/imports/constraints/parallella_timing.xdc"
# set file [file normalize $file]
# set file_obj [get_files -of_objects [get_filesets constrs_1] [list "*$file"]]
# set_property "file_type" "XDC" $file_obj
# set file "[file normalize "$orig_proj_dir/7020_hdmi.srcs/constrs_1/imports/constraints/parallella_z70x0_loc.xdc"]"
# set file_added [add_files -norecurse -fileset $obj $file]
# set file "$orig_proj_dir/7020_hdmi.srcs/constrs_1/imports/constraints/parallella_z70x0_loc.xdc"
# set file [file normalize $file]
# set file_obj [get_files -of_objects [get_filesets constrs_1] [list "*$file"]]
# set_property "file_type" "XDC" $file_obj
# set file "[file normalize "$orig_proj_dir/7020_hdmi.srcs/constrs_1/imports/constraints/parallella_z7020_loc.xdc"]"
# set file_added [add_files -norecurse -fileset $obj $file]
# set file "$orig_proj_dir/7020_hdmi.srcs/constrs_1/imports/constraints/parallella_z7020_loc.xdc"
# set file [file normalize $file]
# set file_obj [get_files -of_objects [get_filesets constrs_1] [list "*$file"]]
# set_property "file_type" "XDC" $file_obj
# set obj [get_filesets constrs_1]
# set_property "target_constrs_file" "$orig_proj_dir/7020_hdmi.srcs/constrs_1/imports/constraints/parallella_timing.xdc" $obj
# if {[string equal [get_filesets -quiet sim_1] ""]} {
# create_fileset -simset sim_1
# }
# set obj [get_filesets sim_1]
# set obj [get_filesets sim_1]
# set_property "xelab.nosort" "1" $obj
WARNING: [filemgmt 56-29] Property 'xelab.nosort' is deprecated. If running in batch mode, please update your script and use 'xsim.compile.xvhdl.nosort' instead. Property 'xsim.compile.xvhdl.nosort' set to '1'.
# set_property "xelab.unifast" "" $obj
# if {[string equal [get_runs -quiet synth_1] ""]} {
# create_run -name synth_1 -part xc7z020clg400-1 -flow {Vivado Synthesis 2014} -strategy "Vivado Synthesis Defaults" -constrset constrs_1
# } else {
# set_property strategy "Vivado Synthesis Defaults" [get_runs synth_1]
# set_property flow "Vivado Synthesis 2014" [get_runs synth_1]
# }
# set obj [get_runs synth_1]
# set_property "needs_refresh" "1" $obj
# set_property "part" "xc7z020clg400-1" $obj
# current_run -synthesis [get_runs synth_1]
# if {[string equal [get_runs -quiet impl_1] ""]} {
# create_run -name impl_1 -part xc7z020clg400-1 -flow {Vivado Implementation 2014} -strategy "Vivado Implementation Defaults" -constrset constrs_1 -parent_run synth_1
# } else {
# set_property strategy "Vivado Implementation Defaults" [get_runs impl_1]
# set_property flow "Vivado Implementation 2014" [get_runs impl_1]
# }
# set obj [get_runs impl_1]
# set_property "needs_refresh" "1" $obj
# set_property "part" "xc7z020clg400-1" $obj
# set_property "steps.write_bitstream.args.readback_file" "0" $obj
# set_property "steps.write_bitstream.args.verbose" "0" $obj
# current_run -implementation [get_runs impl_1]
# puts "INFO: Project created:7020_hdmi"
INFO: Project created:7020_hdmi
# update_compile_order -fileset sources_1
# generate_target -quiet all [get_files $orig_proj_dir/7020_hdmi.srcs/sources_1/bd/elink2_top/elink2_top.bd]
Abnormal program termination (11)
Please check '/home/hadi/Vivado/project/parallella-fpga/hs_err_pid22965.log' for details
Makefile:7: recipe for target 'all' failed
make: *** [all] Error 139
我也把hs_err_pid22965.log放在这里：
#
# An unexpected error has occurred (11)
#
Stack:
/lib/x86_64-linux-gnu/libc.so.6(+0x3ef20) [0x7f5a67facf20]
/opt/Xilinx/Vivado/2015.2/lib/lnx64.o/librdi_coregen.so(HRSBMoDiagram::setForceValidateFlag(bool)+0) [0x7f5a57cc17c0]
/opt/Xilinx/Vivado/2015.2/lib/lnx64.o/librdi_rsb.so(HRSBEnCompositeFile::_generateFor_(HSTVector<std::string, std::allocator<std::string> > const&, HDGUIStatus&, bool)+0x4a5) [0x7f5a470311a5]
/opt/Xilinx/Vivado/2015.2/lib/lnx64.o/librdi_filemgmt.so(HDDACompositeFile::generateFor(HSTVector<std::string, std::allocator<std::string> > const&, HDGUIStatus&, bool)+0x494) [0x7f5a4b044cf4]
/opt/Xilinx/Vivado/2015.2/lib/lnx64.o/librdi_tcltasks.so(HTCDesignGenerateTarget::execute(Tcl_Interp*)+0x8d8) [0x7f5a3a386468]
/opt/Xilinx/Vivado/2015.2/lib/lnx64.o/librdi_common.so(+0x62104f) [0x7f5a690a404f]
/opt/Xilinx/Vivado/2015.2/lib/lnx64.o/libtcl8.5.so(+0x331f5) [0x7f5a63f7f1f5]
/opt/Xilinx/Vivado/2015.2/lib/lnx64.o/libtcl8.5.so(+0x34d6b) [0x7f5a63f80d6b]
/opt/Xilinx/Vivado/2015.2/lib/lnx64.o/libtcl8.5.so(Tcl_EvalEx+0x16) [0x7f5a63f81276]
/opt/Xilinx/Vivado/2015.2/lib/lnx64.o/libtcl8.5.so(Tcl_FSEvalFileEx+0x1d2) [0x7f5a63fe5d02]
/opt/Xilinx/Vivado/2015.2/lib/lnx64.o/librdi_commontasks.so(+0x2f0425) [0x7f5a5f81c425]
/opt/Xilinx/Vivado/2015.2/lib/lnx64.o/librdi_common.so(+0x62104f) [0x7f5a690a404f]
/opt/Xilinx/Vivado/2015.2/lib/lnx64.o/libtcl8.5.so(+0x331f5) [0x7f5a63f7f1f5]
/opt/Xilinx/Vivado/2015.2/lib/lnx64.o/libtcl8.5.so(Tcl_EvalObjv+0x32) [0x7f5a63f7f7e2]
/opt/Xilinx/Vivado/2015.2/lib/lnx64.o/libtcl8.5.so(TclEvalObjEx+0x322) [0x7f5a63f815d2]
/opt/Xilinx/Vivado/2015.2/lib/lnx64.o/librdi_commontasks.so(+0x3074a2) [0x7f5a5f8334a2]
/opt/Xilinx/Vivado/2015.2/lib/lnx64.o/librdi_commontasks.so(+0x30dd9d) [0x7f5a5f839d9d]
/opt/Xilinx/Vivado/2015.2/lib/lnx64.o/librdi_commontasks.so(+0x3078e3) [0x7f5a5f8338e3]
/opt/Xilinx/Vivado/2015.2/lib/lnx64.o/librdi_common.so(+0x62104f) [0x7f5a690a404f]
/opt/Xilinx/Vivado/2015.2/lib/lnx64.o/libtcl8.5.so(+0x331f5) [0x7f5a63f7f1f5]
/opt/Xilinx/Vivado/2015.2/lib/lnx64.o/libtcl8.5.so(Tcl_EvalObjv+0x32) [0x7f5a63f7f7e2]
/opt/Xilinx/Vivado/2015.2/lib/lnx64.o/libtcl8.5.so(TclEvalObjEx+0x322) [0x7f5a63f815d2]
/opt/Xilinx/Vivado/2015.2/lib/lnx64.o/librdi_commonmain.so(+0x7110) [0x7f5a6887e110]
/opt/Xilinx/Vivado/2015.2/lib/lnx64.o/libtcl8.5.so(Tcl_Main+0x1d5) [0x7f5a63fec175]
/opt/Xilinx/Vivado/2015.2/lib/lnx64.o/librdi_common.so(+0x659c89) [0x7f5a690dcc89]
/lib/x86_64-linux-gnu/libpthread.so.0(+0x76db) [0x7f5a679b86db]
/lib/x86_64-linux-gnu/libc.so.6(clone+0x3f) [0x7f5a6808f88f]
答案 0 :(得分：0)
如果检查运行的makefile，则要求将子模块作为组件。
所以运行以下
git submodule init
git submodule update
。
答案 1 :(得分：0)
运行git init和更新后，我遇到以下错误：
vivado -mode batch -source 7020_hdmi.tcl
****** Vivado v2015.4 (64-bit)
**** SW Build 1412921 on Wed Nov 18 09:44:32 MST 2015
**** IP Build 1412160 on Tue Nov 17 13:47:24 MST 2015
** Copyright 1986-2015 Xilinx, Inc. All Rights Reserved.
source 7020_hdmi.tcl
# set origin_dir "."
# set orig_proj_dir "[file normalize "$origin_dir/7020_hdmi"]"
# open_project 7020_hdmi/7020_hdmi.xpr
Scanning sources...
Finished scanning sources
INFO: [IP_Flow 19-234] Refreshing IP repositories
INFO: [IP_Flow 19-1700] Loaded user IP repository '/home/hadi/Vivado/project/peatsa/parallella/parallella-fpga/oh/src/parallella/fpga/parallella_base'.
INFO: [IP_Flow 19-1700] Loaded user IP repository '/home/hadi/Vivado/project/peatsa/parallella/parallella-fpga/AdiHDLLib'.
INFO: [IP_Flow 19-2313] Loaded Vivado IP repository '/opt/Xilinx.15.4/Vivado/2015.4/data/ip'.
# set proj_dir [get_property directory [current_project]]
# set obj [get_projects 7020_hdmi]
# set_property "default_lib" "xil_defaultlib" $obj
# set_property "part" "xc7z020clg400-1" $obj
# set_property "simulator_language" "Mixed" $obj
# if {[string equal [get_filesets -quiet sources_1] ""]} {
# create_fileset -srcset sources_1
# }
# set obj [get_filesets sources_1]
# set_property "ip_repo_paths" "[file normalize "$origin_dir/oh/src/parallella/fpga/parallella_base"] [file normalize "$origin_dir/AdiHDLLib"]" $obj
# update_ip_catalog -rebuild
INFO: [IP_Flow 19-234] Refreshing IP repositories
INFO: [IP_Flow 19-1700] Loaded user IP repository '/home/hadi/Vivado/project/peatsa/parallella/parallella-fpga/oh/src/parallella/fpga/parallella_base'.
INFO: [IP_Flow 19-1700] Loaded user IP repository '/home/hadi/Vivado/project/peatsa/parallella/parallella-fpga/AdiHDLLib'.
# set obj [get_filesets sources_1]
# set files [list \
# "[file normalize "$orig_proj_dir/7020_hdmi.srcs/sources_1/bd/elink2_top/elink2_top.bd"]"\
# "[file normalize "$orig_proj_dir/7020_hdmi.srcs/sources_1/bd/elink2_top/hdl/elink2_top_wrapper.v"]"\
# "[file normalize "$orig_proj_dir/archive_project_summary.txt"]"\
# ]
# add_files -norecurse -fileset $obj $files
CRITICAL WARNING: [Vivado 12-1462] The source file is already part of the fileset 'sources_1'. Requested source '/home/hadi/Vivado/project/peatsa/parallella/parallella-fpga/7020_hdmi/7020_hdmi.srcs/sources_1/bd/elink2_top/elink2_top.bd' will not be added.
WARNING: [filemgmt 56-12] File '/home/hadi/Vivado/project/peatsa/parallella/parallella-fpga/7020_hdmi/7020_hdmi.srcs/sources_1/bd/elink2_top/hdl/elink2_top_wrapper.v' cannot be added to the project because it already exists in the project, skipping this file
WARNING: [filemgmt 56-12] File '/home/hadi/Vivado/project/peatsa/parallella/parallella-fpga/7020_hdmi/archive_project_summary.txt' cannot be added to the project because it already exists in the project, skipping this file
# set file "$orig_proj_dir/7020_hdmi.srcs/sources_1/bd/elink2_top/elink2_top.bd"
# set file [file normalize $file]
# set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]]
# if { ![get_property "is_locked" $file_obj] } {
# set_property "generate_synth_checkpoint" "0" $file_obj
# }
# set_property "used_in_simulation" "0" $file_obj
# set file "$orig_proj_dir/7020_hdmi.srcs/sources_1/bd/elink2_top/hdl/elink2_top_wrapper.v"
# set file [file normalize $file]
# set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]]
# set_property "used_in_simulation" "0" $file_obj
# set obj [get_filesets sources_1]
# set_property "top" "elink2_top_wrapper" $obj
# if {[string equal [get_filesets -quiet constrs_1] ""]} {
# create_fileset -constrset constrs_1
# }
# set obj [get_filesets constrs_1]
# set file "[file normalize "$orig_proj_dir/7020_hdmi.srcs/constrs_1/imports/constraints/parallella_timing.xdc"]"
WARNING: [filemgmt 56-12] File '/home/hadi/Vivado/project/peatsa/parallella/parallella-fpga/7020_hdmi/7020_hdmi.srcs/constrs_1/imports/constraints/parallella_timing.xdc' cannot be added to the project because it already exists in the project, skipping this file
# set file_added [add_files -norecurse -fileset $obj $file]
# set file "$orig_proj_dir/7020_hdmi.srcs/constrs_1/imports/constraints/parallella_timing.xdc"
# set file [file normalize $file]
# set file_obj [get_files -of_objects [get_filesets constrs_1] [list "*$file"]]
# set_property "file_type" "XDC" $file_obj
# set file "[file normalize "$orig_proj_dir/7020_hdmi.srcs/constrs_1/imports/constraints/parallella_z70x0_loc.xdc"]"
WARNING: [filemgmt 56-12] File '/home/hadi/Vivado/project/peatsa/parallella/parallella-fpga/7020_hdmi/7020_hdmi.srcs/constrs_1/imports/constraints/parallella_z70x0_loc.xdc' cannot be added to the project because it already exists in the project, skipping this file
# set file_added [add_files -norecurse -fileset $obj $file]
# set file "$orig_proj_dir/7020_hdmi.srcs/constrs_1/imports/constraints/parallella_z70x0_loc.xdc"
# set file [file normalize $file]
# set file_obj [get_files -of_objects [get_filesets constrs_1] [list "*$file"]]
# set_property "file_type" "XDC" $file_obj
# set file "[file normalize "$orig_proj_dir/7020_hdmi.srcs/constrs_1/imports/constraints/parallella_z7020_loc.xdc"]"
WARNING: [filemgmt 56-12] File '/home/hadi/Vivado/project/peatsa/parallella/parallella-fpga/7020_hdmi/7020_hdmi.srcs/constrs_1/imports/constraints/parallella_z7020_loc.xdc' cannot be added to the project because it already exists in the project, skipping this file
# set file_added [add_files -norecurse -fileset $obj $file]
# set file "$orig_proj_dir/7020_hdmi.srcs/constrs_1/imports/constraints/parallella_z7020_loc.xdc"
# set file [file normalize $file]
# set file_obj [get_files -of_objects [get_filesets constrs_1] [list "*$file"]]
# set_property "file_type" "XDC" $file_obj
# set obj [get_filesets constrs_1]
# set_property "target_constrs_file" "$orig_proj_dir/7020_hdmi.srcs/constrs_1/imports/constraints/parallella_timing.xdc" $obj
# if {[string equal [get_filesets -quiet sim_1] ""]} {
# create_fileset -simset sim_1
# }
# set obj [get_filesets sim_1]
# set obj [get_filesets sim_1]
# set_property "xelab.nosort" "1" $obj
# set_property "xelab.unifast" "" $obj
# if {[string equal [get_runs -quiet synth_1] ""]} {
# create_run -name synth_1 -part xc7z020clg400-1 -flow {Vivado Synthesis 2014} -strategy "Vivado Synthesis Defaults" -constrset constrs_1
# } else {
# set_property strategy "Vivado Synthesis Defaults" [get_runs synth_1]
# set_property flow "Vivado Synthesis 2014" [get_runs synth_1]
# }
# set obj [get_runs synth_1]
# set_property "needs_refresh" "1" $obj
# set_property "part" "xc7z020clg400-1" $obj
# current_run -synthesis [get_runs synth_1]
# if {[string equal [get_runs -quiet impl_1] ""]} {
# create_run -name impl_1 -part xc7z020clg400-1 -flow {Vivado Implementation 2014} -strategy "Vivado Implementation Defaults" -constrset constrs_1 -parent_run synth_1
# } else {
# set_property strategy "Vivado Implementation Defaults" [get_runs impl_1]
# set_property flow "Vivado Implementation 2014" [get_runs impl_1]
# }
# set obj [get_runs impl_1]
# set_property "needs_refresh" "1" $obj
# set_property "part" "xc7z020clg400-1" $obj
# set_property "steps.write_bitstream.args.readback_file" "0" $obj
# set_property "steps.write_bitstream.args.verbose" "0" $obj
# current_run -implementation [get_runs impl_1]
# puts "INFO: Project created:7020_hdmi"
INFO: Project created:7020_hdmi
# update_compile_order -fileset sources_1
# generate_target -quiet all [get_files $orig_proj_dir/7020_hdmi.srcs/sources_1/bd/elink2_top/elink2_top.bd]
# set_property -name {STEPS.SYNTH_DESIGN.ARGS.MORE OPTIONS} -value {-verilog_define CFG_ASIC=0} -objects [get_runs synth_1]
# puts "INFO: Generated Output Products:7020_hdmi"
INFO: Generated Output Products:7020_hdmi
# reset_run synth_1
# launch_runs synth_1
Adding component instance block -- xilinx.com:ip:xlconcat:2.1 - xlconcat_0
Adding component instance block -- xilinx.com:ip:xlconstant:1.1 - xlconstant_0
Adding component instance block -- xilinx.com:ip:proc_sys_reset:5.0 - proc_sys_reset_0
Adding component instance block -- xilinx.com:ip:processing_system7:5.5 - processing_system7_0
Adding component instance block -- www.parallella.org:user:parallella_base:1.0 - parallella_base_0
Adding component instance block -- xilinx.com:ip:axi_protocol_converter:2.1 - auto_pc
Adding component instance block -- xilinx.com:ip:axi_protocol_converter:2.1 - auto_pc
Adding component instance block -- xilinx.com:ip:axi_crossbar:2.1 - xbar
Adding component instance block -- xilinx.com:ip:axi_protocol_converter:2.1 - auto_pc
Adding component instance block -- analog.com:user:axi_clkgen:1.0 - axi_clkgen_0
INFO: [BD 41-434] Could not find an IP with XCI file by name: elink2_top_axi_clkgen_0_0
ERROR: [BD 41-50] Could not find an IP with the given vlnv: analog.com:user:axi_clkgen:1.0
ERROR: [BD 41-595] Failed to add ip repository block <axi_clkgen_0>
ERROR: [BD 41-425] Failed to read Diagram <elink2_top> from BD file </home/hadi/Vivado/project/peatsa/parallella/parallella-fpga/7020_hdmi/7020_hdmi.srcs/sources_1/bd/elink2_top/elink2_top.bd>
Adding component instance block -- xilinx.com:ip:xlconcat:2.1 - xlconcat_0
Adding component instance block -- xilinx.com:ip:xlconstant:1.1 - xlconstant_0
Adding component instance block -- xilinx.com:ip:proc_sys_reset:5.0 - proc_sys_reset_0
Adding component instance block -- xilinx.com:ip:processing_system7:5.5 - processing_system7_0
Adding component instance block -- www.parallella.org:user:parallella_base:1.0 - parallella_base_0
Adding component instance block -- xilinx.com:ip:axi_protocol_converter:2.1 - auto_pc
Adding component instance block -- xilinx.com:ip:axi_protocol_converter:2.1 - auto_pc
Adding component instance block -- xilinx.com:ip:axi_crossbar:2.1 - xbar
Adding component instance block -- xilinx.com:ip:axi_protocol_converter:2.1 - auto_pc
Adding component instance block -- analog.com:user:axi_clkgen:1.0 - axi_clkgen_0
INFO: [BD 41-434] Could not find an IP with XCI file by name: elink2_top_axi_clkgen_0_0
ERROR: [BD 41-50] Could not find an IP with the given vlnv: analog.com:user:axi_clkgen:1.0
ERROR: [BD 41-595] Failed to add ip repository block <axi_clkgen_0>
ERROR: [BD 41-425] Failed to read Diagram <elink2_top> from BD file </home/hadi/Vivado/project/peatsa/parallella/parallella-fpga/7020_hdmi/7020_hdmi.srcs/sources_1/bd/elink2_top/elink2_top.bd>
WARNING: [Runs 36-53] Possible issues detected after target generation. Generation state is unexpected for target 'Synthesis'. Expected 'Generated', got 'Stale' for source '/home/hadi/Vivado/project/peatsa/parallella/parallella-fpga/7020_hdmi/7020_hdmi.srcs/sources_1/bd/elink2_top/elink2_top.bd'
Adding component instance block -- xilinx.com:ip:xlconcat:2.1 - xlconcat_0
Adding component instance block -- xilinx.com:ip:xlconstant:1.1 - xlconstant_0
Adding component instance block -- xilinx.com:ip:proc_sys_reset:5.0 - proc_sys_reset_0
Adding component instance block -- xilinx.com:ip:processing_system7:5.5 - processing_system7_0
Adding component instance block -- www.parallella.org:user:parallella_base:1.0 - parallella_base_0
Adding component instance block -- xilinx.com:ip:axi_protocol_converter:2.1 - auto_pc
Adding component instance block -- xilinx.com:ip:axi_protocol_converter:2.1 - auto_pc
Adding component instance block -- xilinx.com:ip:axi_crossbar:2.1 - xbar
Adding component instance block -- xilinx.com:ip:axi_protocol_converter:2.1 - auto_pc
Adding component instance block -- analog.com:user:axi_clkgen:1.0 - axi_clkgen_0
INFO: [BD 41-434] Could not find an IP with XCI file by name: elink2_top_axi_clkgen_0_0
ERROR: [BD 41-50] Could not find an IP with the given vlnv: analog.com:user:axi_clkgen:1.0
ERROR: [BD 41-595] Failed to add ip repository block <axi_clkgen_0>
ERROR: [BD 41-425] Failed to read Diagram <elink2_top> from BD file </home/hadi/Vivado/project/peatsa/parallella/parallella-fpga/7020_hdmi/7020_hdmi.srcs/sources_1/bd/elink2_top/elink2_top.bd>
WARNING: [Runs 36-53] Possible issues detected after target generation. Generation state is unexpected for target 'Implementation'. Expected 'Generated', got 'Stale' for source '/home/hadi/Vivado/project/peatsa/parallella/parallella-fpga/7020_hdmi/7020_hdmi.srcs/sources_1/bd/elink2_top/elink2_top.bd'
[Wed Jun 20 09:55:43 2018] Launched synth_1...
Run output will be captured here: /home/hadi/Vivado/project/peatsa/parallella/parallella-fpga/7020_hdmi/7020_hdmi.runs/synth_1/runme.log
ERROR: [Common 17-39] 'launch_runs' failed due to earlier errors.
while executing
"launch_runs synth_1"
(file "7020_hdmi.tcl" line 180)
INFO: [Common 17-206] Exiting Vivado at Wed Jun 20 09:55:43 2018...
Makefile:7: recipe for target 'all' failed
make: *** [all] Error 1