无法让phpMyAdmin在mac

时间:2018-05-09 01:24:51

标签: php yii2 xampp localhost apache2

我参加了网络开发课程并遇到了一系列问题。

几周前我在我的机器上安装了XAMPP(mac,Sierra)并用它来玩我创建的一些php文件。 php文件位于/lampp/htdocs/我相信。

然后几天前我安装了Yii2并成功创建了一个基本应用程序(称为UQST)并在Yii2打包的网络服务器上访问它(即我没有使用XAMPP应用程序)。 UQST应用程序安装在自己的目录(/Users/my_username/UQST/)中,我使用./yii serve命令启动与yii2打包在一起的Web服务器。

昨天我尝试安装phpMyAdmin以便我可以用它来创建一个基本数据库 - 但问题是我似乎无法想象phpMyAdmin gui。

我已经尝试在过去24小时内调试此问题,现在似乎无法将Yii2应用程序可视化......这意味着我实际上已经倒退了。洛尔。

我做过的一些事情:

  1. 保存/Users/my_username/UQST/
  2. 下的所有yii2文件
  3. 创建了从/Users/my_username/UQST/到我的DocumentRoot /Library/WebServer/Documents的符号链接,以便http://127.0.0.1/UQST/http://localhost/UQST/
  4. 显示我的应用
  5. phpMyAdmin下保存了基本的phpMyAdmin文件(/Users/my_username/UQST/web/),以便通过“http://localhost/UQST/phpMyAdmin
  6. 访问phpMyAdmin

    此时,当我访问http://localhosthttp://127.0.0.1/时,我看到"它有效!"。

    但当我访问http://127.0.0.1/UQST/http://localhost/UQST/时,我得到了#34;禁止访问:您无权访问此服务器上的/ UQST /。"

    当我尝试访问http://127.0.0.1/UQST/phpMyAdminhttp://localhost/UQST/phpMyAdmin时,我得到"未找到:在此服务器上找不到请求的URL / UQST / phpMyAdmin。"。我发现这个错误令人困惑,因为phpMyAdmin文件夹保存在../UQST/下。

    我的问题:

    1. 如何从http://localhost/UQST/看到yii2应用(UQST)?
    2. 如何从http://localhost/UQST/phpMyAdmin/
    3. 中看到phpMyAdmin

      我想我错过了一些比较基本的东西,但这似乎让我望而却步..

      干杯。

      /private/etc/apache2/httpd.conf:

      # This is the main Apache HTTP server configuration file.  It contains the
      # configuration directives that give the server its instructions.
      # See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
      # In particular, see 
      # <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
      # for a discussion of each configuration directive.
      #
      # Do NOT simply read the instructions in here without understanding
      # what they do.  They're here only as hints or reminders.  If you are unsure
      # consult the online docs. You have been warned.  
      #
      # Configuration and logfile names: If the filenames you specify for many
      # of the server's control files begin with "/" (or "drive:/" for Win32), the
      # server will use that explicit path.  If the filenames do *not* begin
      # with "/", the value of ServerRoot is prepended -- so "logs/access_log"
      # with ServerRoot set to "/usr/local/apache2" will be interpreted by the
      # server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log" 
      # will be interpreted as '/logs/access_log'.
      
      #
      # ServerRoot: The top of the directory tree under which the server's
      # configuration, error, and log files are kept.
      #
      # Do not add a slash at the end of the directory path.  If you point
      # ServerRoot at a non-local disk, be sure to specify a local disk on the
      # Mutex directive, if file-based mutexes are used.  If you wish to share the
      # same ServerRoot for multiple httpd daemons, you will need to change at
      # least PidFile.
      #
      ServerRoot "/usr"
      
      #
      # Mutex: Allows you to set the mutex mechanism and mutex file directory
      # for individual mutexes, or change the global defaults
      #
      # Uncomment and change the directory if mutexes are file-based and the default
      # mutex file directory is not on a local disk or is not appropriate for some
      # other reason.
      #
      # Mutex default:/private/var/run
      
      #
      # Listen: Allows you to bind Apache to specific IP addresses and/or
      # ports, instead of the default. See also the <VirtualHost>
      # directive.
      #
      # Change this to Listen on specific IP addresses as shown below to 
      # prevent Apache from glomming onto all bound IP addresses.
      #
      #Listen 12.34.56.78:80
      <IfDefine SERVER_APP_HAS_DEFAULT_PORTS>
          Listen 8080
      </IfDefine>
      <IfDefine !SERVER_APP_HAS_DEFAULT_PORTS>
          Listen 80
      </IfDefine>
      
      #
      # Dynamic Shared Object (DSO) Support
      #
      # To be able to use the functionality of a module which was built as a DSO you
      # have to place corresponding `LoadModule' lines at this location so the
      # directives contained in it are actually available _before_ they are used.
      # Statically compiled modules (those listed by `httpd -l') do not need
      # to be loaded here.
      #
      # Example:
      # LoadModule foo_module modules/mod_foo.so
      #
      LoadModule authn_file_module libexec/apache2/mod_authn_file.so
          #LoadModule authn_dbm_module libexec/apache2/mod_authn_dbm.so
          #LoadModule authn_anon_module libexec/apache2/mod_authn_anon.so
          #LoadModule authn_dbd_module libexec/apache2/mod_authn_dbd.so
          #LoadModule authn_socache_module libexec/apache2/mod_authn_socache.so
      LoadModule authn_core_module libexec/apache2/mod_authn_core.so
      LoadModule authz_host_module libexec/apache2/mod_authz_host.so
      LoadModule authz_groupfile_module libexec/apache2/mod_authz_groupfile.so
      LoadModule authz_user_module libexec/apache2/mod_authz_user.so
          #LoadModule authz_dbm_module libexec/apache2/mod_authz_dbm.so
          #LoadModule authz_owner_module libexec/apache2/mod_authz_owner.so
          #LoadModule authz_dbd_module libexec/apache2/mod_authz_dbd.so
      LoadModule authz_core_module libexec/apache2/mod_authz_core.so
          #LoadModule authnz_ldap_module libexec/apache2/mod_authnz_ldap.so
      LoadModule access_compat_module libexec/apache2/mod_access_compat.so
      LoadModule auth_basic_module libexec/apache2/mod_auth_basic.so
          #LoadModule auth_form_module libexec/apache2/mod_auth_form.so
          #LoadModule auth_digest_module libexec/apache2/mod_auth_digest.so
          #LoadModule allowmethods_module libexec/apache2/mod_allowmethods.so
          #LoadModule file_cache_module libexec/apache2/mod_file_cache.so
          #LoadModule cache_module libexec/apache2/mod_cache.so
          #LoadModule cache_disk_module libexec/apache2/mod_cache_disk.so
          #LoadModule cache_socache_module libexec/apache2/mod_cache_socache.so
          #LoadModule socache_shmcb_module libexec/apache2/mod_socache_shmcb.so
          #LoadModule socache_dbm_module libexec/apache2/mod_socache_dbm.so
          #LoadModule socache_memcache_module libexec/apache2/mod_socache_memcache.so
          #LoadModule watchdog_module libexec/apache2/mod_watchdog.so
          #LoadModule macro_module libexec/apache2/mod_macro.so
          #LoadModule dbd_module libexec/apache2/mod_dbd.so
          #LoadModule dumpio_module libexec/apache2/mod_dumpio.so
          #LoadModule echo_module libexec/apache2/mod_echo.so
          #LoadModule buffer_module libexec/apache2/mod_buffer.so
          #LoadModule data_module libexec/apache2/mod_data.so
          #LoadModule ratelimit_module libexec/apache2/mod_ratelimit.so
      LoadModule reqtimeout_module libexec/apache2/mod_reqtimeout.so
          #LoadModule ext_filter_module libexec/apache2/mod_ext_filter.so
          #LoadModule request_module libexec/apache2/mod_request.so
          #LoadModule include_module libexec/apache2/mod_include.so
      LoadModule filter_module libexec/apache2/mod_filter.so
          #LoadModule reflector_module libexec/apache2/mod_reflector.so
          #LoadModule substitute_module libexec/apache2/mod_substitute.so
          #LoadModule sed_module libexec/apache2/mod_sed.so
          #LoadModule charset_lite_module libexec/apache2/mod_charset_lite.so
          #LoadModule deflate_module libexec/apache2/mod_deflate.so
          #LoadModule xml2enc_module libexec/apache2/mod_xml2enc.so
          #LoadModule proxy_html_module libexec/apache2/mod_proxy_html.so
      LoadModule mime_module libexec/apache2/mod_mime.so
      LoadModule log_config_module libexec/apache2/mod_log_config.so
          #LoadModule log_debug_module libexec/apache2/mod_log_debug.so
          #LoadModule log_forensic_module libexec/apache2/mod_log_forensic.so
          #LoadModule logio_module libexec/apache2/mod_logio.so
      LoadModule env_module libexec/apache2/mod_env.so
          #LoadModule mime_magic_module libexec/apache2/mod_mime_magic.so
          #LoadModule expires_module libexec/apache2/mod_expires.so
      LoadModule headers_module libexec/apache2/mod_headers.so
          #LoadModule usertrack_module libexec/apache2/mod_usertrack.so
          ##LoadModule unique_id_module libexec/apache2/mod_unique_id.so
      LoadModule setenvif_module libexec/apache2/mod_setenvif.so
      LoadModule version_module libexec/apache2/mod_version.so
          #LoadModule remoteip_module libexec/apache2/mod_remoteip.so
          #LoadModule proxy_module libexec/apache2/mod_proxy.so
          #LoadModule proxy_connect_module libexec/apache2/mod_proxy_connect.so
          #LoadModule proxy_ftp_module libexec/apache2/mod_proxy_ftp.so
          #LoadModule proxy_http_module libexec/apache2/mod_proxy_http.so
          #LoadModule proxy_fcgi_module libexec/apache2/mod_proxy_fcgi.so
          #LoadModule proxy_scgi_module libexec/apache2/mod_proxy_scgi.so
          #LoadModule proxy_fdpass_module libexec/apache2/mod_proxy_fdpass.so
          #LoadModule proxy_wstunnel_module libexec/apache2/mod_proxy_wstunnel.so
          #LoadModule proxy_ajp_module libexec/apache2/mod_proxy_ajp.so
          #LoadModule proxy_balancer_module libexec/apache2/mod_proxy_balancer.so
          #LoadModule proxy_express_module libexec/apache2/mod_proxy_express.so
          #LoadModule proxy_hcheck_module libexec/apache2/mod_proxy_hcheck.so
          #LoadModule session_module libexec/apache2/mod_session.so
          #LoadModule session_cookie_module libexec/apache2/mod_session_cookie.so
          #LoadModule session_dbd_module libexec/apache2/mod_session_dbd.so
      LoadModule slotmem_shm_module libexec/apache2/mod_slotmem_shm.so
          #LoadModule slotmem_plain_module libexec/apache2/mod_slotmem_plain.so
          #LoadModule ssl_module libexec/apache2/mod_ssl.so
          #LoadModule dialup_module libexec/apache2/mod_dialup.so
          #LoadModule http2_module libexec/apache2/mod_http2.so
          #LoadModule lbmethod_byrequests_module libexec/apache2/mod_lbmethod_byrequests.so
          #LoadModule lbmethod_bytraffic_module libexec/apache2/mod_lbmethod_bytraffic.so
          #LoadModule lbmethod_bybusyness_module libexec/apache2/mod_lbmethod_bybusyness.so
          ##LoadModule lbmethod_heartbeat_module libexec/apache2/mod_lbmethod_heartbeat.so
      LoadModule unixd_module libexec/apache2/mod_unixd.so
          #LoadModule heartbeat_module libexec/apache2/mod_heartbeat.so
          #LoadModule heartmonitor_module libexec/apache2/mod_heartmonitor.so
          #LoadModule dav_module libexec/apache2/mod_dav.so
      LoadModule status_module libexec/apache2/mod_status.so
      LoadModule autoindex_module libexec/apache2/mod_autoindex.so
          #LoadModule asis_module libexec/apache2/mod_asis.so
          #LoadModule info_module libexec/apache2/mod_info.so
          #LoadModule cgi_module libexec/apache2/mod_cgi.so
          #LoadModule dav_fs_module libexec/apache2/mod_dav_fs.so
          #LoadModule dav_lock_module libexec/apache2/mod_dav_lock.so
          #LoadModule vhost_alias_module libexec/apache2/mod_vhost_alias.so
      LoadModule negotiation_module libexec/apache2/mod_negotiation.so
      LoadModule dir_module libexec/apache2/mod_dir.so
          #LoadModule imagemap_module libexec/apache2/mod_imagemap.so
          #LoadModule actions_module libexec/apache2/mod_actions.so
          #LoadModule speling_module libexec/apache2/mod_speling.so
          #LoadModule userdir_module libexec/apache2/mod_userdir.so
      LoadModule alias_module libexec/apache2/mod_alias.so
          #LoadModule rewrite_module libexec/apache2/mod_rewrite.so
      LoadModule php7_module libexec/apache2/libphp7.so
          #LoadModule perl_module libexec/apache2/mod_perl.so
      LoadModule hfs_apple_module libexec/apache2/mod_hfs_apple.so
      
      <IfModule unixd_module>
      #
      # If you wish httpd to run as a different user or group, you must run
      # httpd as root initially and it will switch.  
      #
      # User/Group: The name (or #number) of the user/group to run httpd as.
      # It is usually good practice to create a dedicated user and group for
      # running httpd, as with most system services.
      #
      User _www
      Group _www
      
      </IfModule>
      
      # 'Main' server configuration
      #
      # The directives in this section set up the values used by the 'main'
      # server, which responds to any requests that aren't handled by a
      # <VirtualHost> definition.  These values also provide defaults for
      # any <VirtualHost> containers you may define later in the file.
      #
      # All of these directives may appear inside <VirtualHost> containers,
      # in which case these default settings will be overridden for the
      # virtual host being defined.
      #
      
      #
      # ServerAdmin: Your address, where problems with the server should be
      # e-mailed.  This address appears on some server-generated pages, such
      # as error documents.  e.g. admin@your-domain.com
      #
      ServerAdmin you@example.com
      
      #
      # ServerName gives the name and port that the server uses to identify itself.
      # This can often be determined automatically, but we recommend you specify
      # it explicitly to prevent problems during startup.
      #
      # If your host doesn't have a registered DNS name, enter its IP address here.
      #
      #ServerName www.example.com:80
      
      #
      # Deny access to the entirety of your server's filesystem. You must
      # explicitly permit access to web content directories in other 
      # <Directory> blocks below.
      #
      <Directory />
          AllowOverride none
          Require all denied
      </Directory>
      
      #
      # Note that from this point forward you must specifically allow
      # particular features to be enabled - so if something's not working as
      # you might expect, make sure that you have specifically enabled it
      # below.
      #
      
      #
      # DocumentRoot: The directory out of which you will serve your
      # documents. By default, all requests are taken from this directory, but
      # symbolic links and aliases may be used to point to other locations.
      #
      DocumentRoot "/Library/WebServer/Documents"
      <Directory "/Library/WebServer/Documents">
          #
          # Possible values for the Options directive are "None", "All",
          # or any combination of:
          #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
          #
          # Note that "MultiViews" must be named *explicitly* --- "Options All"
          # doesn't give it to you.
          #
          # The Options directive is both complicated and important.  Please see
          # http://httpd.apache.org/docs/2.4/mod/core.html#options
          # for more information.
          #
          Options FollowSymLinks Multiviews
          MultiviewsMatch Any
      
          #
          # AllowOverride controls what directives may be placed in .htaccess files.
          # It can be "All", "None", or any combination of the keywords:
          #   AllowOverride FileInfo AuthConfig Limit
          #
          AllowOverride None
      
          #
          # Controls who can get stuff from this server.
          #
          Require all granted
      </Directory>
      
      #
      # DirectoryIndex: sets the file that Apache will serve if a directory
      # is requested.
      #
      <IfModule dir_module>
          DirectoryIndex index.html
      </IfModule>
      
      #
      # The following lines prevent .htaccess and .htpasswd files from being 
      # viewed by Web clients. 
      #
      <FilesMatch "^\.([Hh][Tt]|[Dd][Ss]_[Ss])">
          Require all denied
      </FilesMatch>
      
      #
      # Apple specific filesystem protection.
      #
      <Files "rsrc">
          Require all denied
      </Files>
      <DirectoryMatch ".*\.\.namedfork">
          Require all denied
      </DirectoryMatch>
      
      #
      # ErrorLog: The location of the error log file.
      # If you do not specify an ErrorLog directive within a <VirtualHost>
      # container, error messages relating to that virtual host will be
      # logged here.  If you *do* define an error logfile for a <VirtualHost>
      # container, that host's errors will be logged there and not here.
      #
      ErrorLog "/private/var/log/apache2/error_log"
      
      #
      # LogLevel: Control the number of messages logged to the error_log.
      # Possible values include: debug, info, notice, warn, error, crit,
      # alert, emerg.
      #
      LogLevel warn
      
      <IfModule log_config_module>
          #
          # The following directives define some format nicknames for use with
          # a CustomLog directive (see below).
          #
          LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
          LogFormat "%h %l %u %t \"%r\" %>s %b" common
      
          <IfModule logio_module>
            # You need to enable mod_logio.c to use %I and %O
            LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
          </IfModule>
      
          #
          # The location and format of the access logfile (Common Logfile Format).
          # If you do not define any access logfiles within a <VirtualHost>
          # container, they will be logged here.  Contrariwise, if you *do*
          # define per-<VirtualHost> access logfiles, transactions will be
          # logged therein and *not* in this file.
          #
          CustomLog "/private/var/log/apache2/access_log" common
      
          #
          # If you prefer a logfile with access, agent, and referer information
          # (Combined Logfile Format) you can use the following directive.
          #
          #CustomLog "/private/var/log/apache2/access_log" combined
      </IfModule>
      
      <IfModule alias_module>
          #
          # Redirect: Allows you to tell clients about documents that used to 
          # exist in your server's namespace, but do not anymore. The client 
          # will make a new request for the document at its new location.
          # Example:
          # Redirect permanent /foo http://www.example.com/bar
      
          #
          # Alias: Maps web paths into filesystem paths and is used to
          # access content that does not live under the DocumentRoot.
          # Example:
          # Alias /webpath /full/filesystem/path
          #
          # If you include a trailing / on /webpath then the server will
          # require it to be present in the URL.  You will also likely
          # need to provide a <Directory> section to allow access to
          # the filesystem path.
      
          #
          # ScriptAlias: This controls which directories contain server scripts. 
          # ScriptAliases are essentially the same as Aliases, except that
          # documents in the target directory are treated as applications and
          # run by the server when requested rather than as documents sent to the
          # client.  The same rules about trailing "/" apply to ScriptAlias
          # directives as to Alias.
          #
          ScriptAliasMatch ^/cgi-bin/((?!(?i:webobjects)).*$) "/Library/WebServer/CGI-Executables/$1"
      
      </IfModule>
      
      <IfModule cgid_module>
          #
          # ScriptSock: On threaded servers, designate the path to the UNIX
          # socket used to communicate with the CGI daemon of mod_cgid.
          #
          #Scriptsock cgisock
      </IfModule>
      
      #
      # "/Library/WebServer/CGI-Executables" should be changed to whatever your ScriptAliased
      # CGI directory exists, if you have that configured.
      #
      <Directory "/Library/WebServer/CGI-Executables">
          AllowOverride None
          Options None
          Require all granted
      </Directory>
      
      <IfModule headers_module>
          #
          # Avoid passing HTTP_PROXY environment to CGI's on this or any proxied
          # backend servers which have lingering "httpoxy" defects.
          # 'Proxy' request header is undefined by the IETF, not listed by IANA
          #
          RequestHeader unset Proxy early
      </IfModule>
      
      <IfModule mime_module>
          #
          # TypesConfig points to the file containing the list of mappings from
          # filename extension to MIME-type.
          #
          TypesConfig /private/etc/apache2/mime.types
      
          #
          # AddType allows you to add to or override the MIME configuration
          # file specified in TypesConfig for specific file types.
          #
          #AddType application/x-gzip .tgz
          #
          # AddEncoding allows you to have certain browsers uncompress
          # information on the fly. Note: Not all browsers support this.
          #
          #AddEncoding x-compress .Z
          #AddEncoding x-gzip .gz .tgz
          #
          # If the AddEncoding directives above are commented-out, then you
          # probably should define those extensions to indicate media types:
          #
          AddType application/x-compress .Z
          AddType application/x-gzip .gz .tgz
      
          #
          # AddHandler allows you to map certain file extensions to "handlers":
          # actions unrelated to filetype. These can be either built into the server
          # or added with the Action directive (see below)
          #
          # To use CGI scripts outside of ScriptAliased directories:
          # (You will also need to add "ExecCGI" to the "Options" directive.)
          #
          #AddHandler cgi-script .cgi
      
          # For type maps (negotiated resources):
          #AddHandler type-map var
      
          #
          # Filters allow you to process content before it is sent to the client.
          #
          # To parse .shtml files for server-side includes (SSI):
          # (You will also need to add "Includes" to the "Options" directive.)
          #
          #AddType text/html .shtml
          #AddOutputFilter INCLUDES .shtml
      </IfModule>
      
      #
      # The mod_mime_magic module allows the server to use various hints from the
      # contents of the file itself to determine its type.  The MIMEMagicFile
      # directive tells the module where the hint definitions are located.
      #
      #MIMEMagicFile /private/etc/apache2/magic
      
      #
      # Customizable error responses come in three flavors:
      # 1) plain text 2) local redirects 3) external redirects
      #
      # Some examples:
      #ErrorDocument 500 "The server made a boo boo."
      #ErrorDocument 404 /missing.html
      #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
      #ErrorDocument 402 http://www.example.com/subscription_info.html
      #
      
      #
      # MaxRanges: Maximum number of Ranges in a request before
      # returning the entire resource, or one of the special
      # values 'default', 'none' or 'unlimited'.
      # Default setting is to accept 200 Ranges.
      #MaxRanges unlimited
      
      #
      # EnableMMAP and EnableSendfile: On systems that support it, 
      # memory-mapping or the sendfile syscall may be used to deliver
      # files.  This usually improves server performance, but must
      # be turned off when serving from networked-mounted 
      # filesystems or if support for these functions is otherwise
      # broken on your system.
      # Defaults: EnableMMAP On, EnableSendfile Off
      #
      #EnableMMAP off
      #EnableSendfile on
      
      TraceEnable off
      
      # Supplemental configuration
      #
      # The configuration files in the /private/etc/apache2/extra/ directory can be 
      # included to add extra features or to modify the default configuration of 
      # the server, or you may simply copy their contents here and change as 
      # necessary.
      
      # Server-pool management (MPM specific)
      Include /private/etc/apache2/extra/httpd-mpm.conf
      
      # Multi-language error messages
      #Include /private/etc/apache2/extra/httpd-multilang-errordoc.conf
      
      # Fancy directory listings
      Include /private/etc/apache2/extra/httpd-autoindex.conf
      
      # Language settings
      #Include /private/etc/apache2/extra/httpd-languages.conf
      
      # User home directories
      #Include /private/etc/apache2/extra/httpd-userdir.conf
      
      # Real-time info on requests and configuration
      #Include /private/etc/apache2/extra/httpd-info.conf
      
      # Virtual hosts
      #Include /private/etc/apache2/extra/httpd-vhosts.conf
      
      # Local access to the Apache HTTP Server Manual
      #Include /private/etc/apache2/extra/httpd-manual.conf
      
      # Distributed authoring and versioning (WebDAV)
      #Include /private/etc/apache2/extra/httpd-dav.conf
      
      # Various default settings
      #Include /private/etc/apache2/extra/httpd-default.conf
      
      # Configure mod_proxy_html to understand HTML4/XHTML1
      <IfModule proxy_html_module>
      Include /private/etc/apache2/extra/proxy-html.conf
      </IfModule>
      
      # Secure (SSL/TLS) connections
      #Include /private/etc/apache2/extra/httpd-ssl.conf
      #
      # Note: The following must must be present to support
      #       starting without SSL on platforms with no /dev/random equivalent
      #       but a statically compiled-in mod_ssl.
      #
      <IfModule ssl_module>
      SSLRandomSeed startup builtin
      SSLRandomSeed connect builtin
      </IfModule>
      
      Include /private/etc/apache2/other/*.conf
      

      编辑#1: 我发现了一些问题。我认为,设置符号链接是错误的,因为我现在可以在访问http://localhost/UQST/UQST/web/phpMyAdmin/时看到phpMyAdmin。我仍然无法访问Yii2应用(当我尝试访问http://localhost/UQST/UQST/时,我收到了禁止的错误。

      编辑#2:我现在可以访问Yii2应用了。可以通过http://localhost/UQST/UQST/web/访问它。 FFS。我花了太长时间才弄明白。

1 个答案:

答案 0 :(得分:0)

Yii2应用程序在http://localhost/UQST/UQST/web/和php http://localhost/UQST/UQST/web/phpMyAdmin/的phpMyAdmin可见。这花了太长时间才搞清楚。