我找不到任何关于它的任何线索，除了使用tweetpic的已弃用的文章现已关闭。
任何适用于Powershell的替代方案？
更新：我的问题不是关于是否有Twitter API当然我知道有，但因为使用这样的Powershell Guy并不是微不足道https://twittercommunity.com/t/media-upload-doesnt-work-powershell/93861我正在寻找一个模块
答案 0 :(得分：2)
来自https://www.adamtheautomator.com/twitter-module-powershell/的Adam Bertram **这只允许发布推文和DM。*
您可以尝试使用下面的PSM1模块，但您需要在apps.twitter.com上创建自己的Twitter应用程序，并在应用程序的API密钥部分下生成访问令牌。执行此操作后，我建议您将API密钥，API密码，访问令牌和访问令牌密钥复制/粘贴为Get-OAuthAuthorization函数下的默认参数。
<#
===========================================================================
Created on: 8/31/2014 3:11 PM
Created by: Adam Bertram
Filename: MyTwitter.psm1
#>
function Get-OAuthAuthorization {
<#
.SYNOPSIS
This function is used to setup all the appropriate security stuff needed to issue
API calls against Twitter's API. It has been tested with v1.1 of the API. It currently
includes support only for sending tweets from a single user account and to send DMs from
a single user account.
.EXAMPLE
Get-OAuthAuthorization -DmMessage 'hello' -HttpEndPoint 'https://api.twitter.com/1.1/direct_messages/new.json' -Username adam
This example gets the authorization string needed in the HTTP POST method to send a direct
message with the text 'hello' to the user 'adam'.
.EXAMPLE
Get-OAuthAuthorization -TweetMessage 'hello' -HttpEndPoint 'https://api.twitter.com/1.1/statuses/update.json'
This example gets the authorization string needed in the HTTP POST method to send out a tweet.
.PARAMETER HttpEndPoint
This is the URI that you must use to issue calls to the API.
.PARAMETER TweetMessage
Use this parameter if you're sending a tweet. This is the tweet's text.
.PARAMETER DmMessage
If you're sending a DM to someone, this is the DM's text.
.PARAMETER Username
If you're sending a DM to someone, this is the username you'll be sending to.
.PARAMETER ApiKey
The API key for the Twitter application you previously setup.
.PARAMETER ApiSecret
The API secret key for the Twitter application you previously setup.
.PARAMETER AccessToken
The access token that you generated within your Twitter application.
.PARAMETER
The access token secret that you generated within your Twitter application.
#>
[CmdletBinding(DefaultParameterSetName = 'None')]
[OutputType('System.Management.Automation.PSCustomObject')]
param (
[Parameter(Mandatory)]
[string]$HttpEndPoint,
[Parameter(Mandatory, ParameterSetName = 'NewTweet')]
[string]$TweetMessage,
[Parameter(Mandatory, ParameterSetName = 'DM')]
[string]$DmMessage,
[Parameter(Mandatory, ParameterSetName = 'DM')]
[string]$Username,
[Parameter()]
[string]$ApiKey = '2R3aJXohHmSABPaiQGaeprny7',
[Parameter()]
[string]$ApiSecret = '',
[Parameter()]
[string]$AccessToken = '',
[Parameter()]
[string]$AccessTokenSecret = ''
)
begin {
$ErrorActionPreference = [System.Management.Automation.ActionPreference]::Stop
Set-StrictMode -Version Latest
try {
[Reflection.Assembly]::LoadWithPartialName("System.Security") | Out-Null
[Reflection.Assembly]::LoadWithPartialName("System.Net") | Out-Null
} catch {
Write-Error $_.Exception.Message
}
}
process {
try {
## Generate a random 32-byte string. I'm using the current time (in seconds) and appending 5 chars to the end to get to 32 bytes
## Base64 allows for an '=' but Twitter does not. If this is found, replace it with some alphanumeric character
$OauthNonce = [System.Convert]::ToBase64String(([System.Text.Encoding]::ASCII.GetBytes("$([System.DateTime]::Now.Ticks.ToString())12345"))).Replace('=', 'g')
Write-Verbose "Generated Oauth none string '$OauthNonce'"
## Find the total seconds since 1/1/1970 (epoch time)
$EpochTimeNow = [System.DateTime]::UtcNow - [System.DateTime]::ParseExact("01/01/1970", "dd/MM/yyyy", $null)
Write-Verbose "Generated epoch time '$EpochTimeNow'"
$OauthTimestamp = [System.Convert]::ToInt64($EpochTimeNow.TotalSeconds).ToString();
Write-Verbose "Generated Oauth timestamp '$OauthTimestamp'"
## Build the signature
$SignatureBase = "$([System.Uri]::EscapeDataString($HttpEndPoint))&"
$SignatureParams = @{
'oauth_consumer_key' = $ApiKey;
'oauth_nonce' = $OauthNonce;
'oauth_signature_method' = 'HMAC-SHA1';
'oauth_timestamp' = $OauthTimestamp;
'oauth_token' = $AccessToken;
'oauth_version' = '1.0';
}
if ($TweetMessage) {
$SignatureParams.status = $TweetMessage
} elseif ($DmMessage) {
$SignatureParams.screen_name = $Username
$SignatureParams.text = $DmMessage
}
## Create a string called $SignatureBase that joins all URL encoded 'Key=Value' elements with a &
## Remove the URL encoded & at the end and prepend the necessary 'POST&' verb to the front
$SignatureParams.GetEnumerator() | sort name | foreach {
Write-Verbose "Adding '$([System.Uri]::EscapeDataString(`"$($_.Key)=$($_.Value)&`"))' to signature string"
$SignatureBase += [System.Uri]::EscapeDataString("$($_.Key)=$($_.Value)&".Replace(',','%2C').Replace('!','%21'))
}
$SignatureBase = $SignatureBase.TrimEnd('%26')
$SignatureBase = 'POST&' + $SignatureBase
Write-Verbose "Base signature generated '$SignatureBase'"
## Create the hashed string from the base signature
$SignatureKey = [System.Uri]::EscapeDataString($ApiSecret) + "&" + [System.Uri]::EscapeDataString($AccessTokenSecret);
$hmacsha1 = new-object System.Security.Cryptography.HMACSHA1;
$hmacsha1.Key = [System.Text.Encoding]::ASCII.GetBytes($SignatureKey);
$OauthSignature = [System.Convert]::ToBase64String($hmacsha1.ComputeHash([System.Text.Encoding]::ASCII.GetBytes($SignatureBase)));
Write-Verbose "Using signature '$OauthSignature'"
## Build the authorization headers using most of the signature headers elements. This is joining all of the 'Key=Value' elements again
## and only URL encoding the Values this time while including non-URL encoded double quotes around each value
$AuthorizationParams = $SignatureParams
$AuthorizationParams.Add('oauth_signature', $OauthSignature)
## Remove any API call-specific params from the authorization params
$AuthorizationParams.Remove('status')
$AuthorizationParams.Remove('text')
$AuthorizationParams.Remove('screen_name')
$AuthorizationString = 'OAuth '
$AuthorizationParams.GetEnumerator() | sort name | foreach { $AuthorizationString += $_.Key + '="' + [System.Uri]::EscapeDataString($_.Value) + '", ' }
$AuthorizationString = $AuthorizationString.TrimEnd(', ')
Write-Verbose "Using authorization string '$AuthorizationString'"
$AuthorizationString
} catch {
Write-Error $_.Exception.Message
}
}
}
function Send-Tweet {
<#
.SYNOPSIS
This sends a tweet under a username.
.EXAMPLE
Send-Tweet -Message 'hello, world'
This example will send a tweet with the text 'hello, world'.
.PARAMETER Message
The text of the tweet.
#>
[CmdletBinding()]
[OutputType('System.Management.Automation.PSCustomObject')]
param (
[Parameter(Mandatory)]
[ValidateLength(1, 140)]
[string]$Message
)
process {
$HttpEndPoint = 'https://api.twitter.com/1.1/statuses/update.json'
$AuthorizationString = Get-OAuthAuthorization -TweetMessage $Message -HttpEndPoint $HttpEndPoint
## Convert the message to a Byte array
#$Body = [System.Text.Encoding]::ASCII.GetBytes("status=$Message");
$Body = "status=$Message"
Write-Verbose "Using POST body '$Body'"
Invoke-RestMethod -URI $HttpEndPoint -Method Post -Body $Body -Headers @{ 'Authorization' = $AuthorizationString } -ContentType "application/x-www-form-urlencoded"
}
}
function Send-TwitterDm {
<#
.SYNOPSIS
This sends a DM to another Twitter user. NOTE: You can only send up to
250 DMs in a 24 hour period.
.EXAMPLE
Send-TwitterDm -Message 'hello, Adam' -Username 'adam','bill'
This sends a DM with the text 'hello, Adam' to the username 'adam' and 'bill'
.PARAMETER Message
The text of the DM.
.PARAMETER Username
The username(s) you'd like to send the DM to.
#>
[CmdletBinding()]
[OutputType('System.Management.Automation.PSCustomObject')]
param (
[Parameter(Mandatory)]
[ValidateLength(1, 140)]
[string]$Message,
[Parameter(Mandatory)]
[string[]]$Username
)
process {
$HttpEndPoint = 'https://api.twitter.com/1.1/direct_messages/new.json'
## Convert the message to a Byte array
#$Message = [System.Uri]::EscapeDataString($Message)
foreach ($User in $Username) {
$AuthorizationString = Get-OAuthAuthorization -DmMessage $Message -HttpEndPoint $HttpEndPoint -Username $User -Verbose
$User = [System.Uri]::EscapeDataString($User)
$Body ="text=$Message&screen_name=$User"
Write-Verbose "Using POST body '$Body'"
Invoke-RestMethod -URI $HttpEndPoint -Method Post -Body $Body -Headers @{ 'Authorization' = $AuthorizationString } -ContentType "application/x-www-form-urlencoded"
}
}
}
Export-ModuleMember Send-Tweet
Export-ModuleMember Send-TwitterDm