我尝试在Ubuntu 16.04 VM中安装devtools软件包 我错了。
我尝试成功安装的其他软件包
但是我无法安装它，控制台中的过程是这样的：
> install.packages("devtools")
Installing package into ‘/home/stefan/R/x86_64-pc-linux-gnu-library/3.2’
(as ‘lib’ is unspecified)
also installing the dependencies ‘curl’, ‘openssl’, ‘httr’, ‘git2r’
--2018-01-26 22:14:08-- https://cran.rstudio.com/src/contrib/curl_3.1.tar.gz
Resolving cran.rstudio.com (cran.rstudio.com)... 54.230.27.181
Connecting to cran.rstudio.com (cran.rstudio.com)|54.230.27.181|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 366086 (358K) [application/x-gzip]
Saving to: ‘/tmp/RtmpIF4wAz/downloaded_packages/curl_3.1.tar.gz’
0K .......... .......... .......... .......... .......... 13% 1017K 0s
50K .......... .......... .......... .......... .......... 27% 1,62M 0s
100K .......... .......... .......... .......... .......... 41% 1,32M 0s
150K .......... .......... .......... .......... .......... 55% 4,09M 0s
200K .......... .......... .......... .......... .......... 69% 4,59M 0s
250K .......... .......... .......... .......... .......... 83% 12,0M 0s
300K .......... .......... .......... .......... .......... 97% 2,84M 0s
350K ....... 100% 19,6M=0,2s
2018-01-26 22:14:09 (2,18 MB/s) - ‘/tmp/RtmpIF4wAz/downloaded_packages/curl_3.1.tar.gz’ saved [366086/366086]
--2018-01-26 22:14:09-- https://cran.rstudio.com/src/contrib/openssl_0.9.9.tar.gz
Resolving cran.rstudio.com (cran.rstudio.com)... 54.230.27.181
Connecting to cran.rstudio.com (cran.rstudio.com)|54.230.27.181|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1112927 (1,1M) [application/x-gzip]
Saving to: ‘/tmp/RtmpIF4wAz/downloaded_packages/openssl_0.9.9.tar.gz’
0K .......... .......... .......... .......... .......... 4% 1,02M 1s
50K .......... .......... .......... .......... .......... 9% 194K 3s
100K .......... .......... .......... .......... .......... 13% 215K 3s
150K .......... .......... .......... .......... .......... 18% 227K 3s
200K .......... .......... .......... .......... .......... 23% 10,2M 3s
250K .......... .......... .......... .......... .......... 27% 253K 3s
300K .......... .......... .......... .......... .......... 32% 271K 2s
350K .......... .......... .......... .......... .......... 36% 289K 2s
400K .......... .......... .......... .......... .......... 41% 317K 2s
450K .......... .......... .......... .......... .......... 46% 3,97M 2s
500K .......... .......... .......... .......... .......... 50% 338K 2s
550K .......... .......... .......... .......... .......... 55% 346K 1s
600K .......... .......... .......... .......... .......... 59% 372K 1s
650K .......... .......... .......... .......... .......... 64% 5,58M 1s
700K .......... .......... .......... .......... .......... 69% 317K 1s
750K .......... .......... .......... .......... .......... 73% 315K 1s
800K .......... .......... .......... .......... .......... 78% 344K 1s
850K .......... .......... .......... .......... .......... 82% 344K 1s
900K .......... .......... .......... .......... .......... 87% 6,08M 0s
950K .......... .......... .......... .......... .......... 92% 404K 0s
1000K .......... .......... .......... .......... .......... 96% 567K 0s
1050K .......... .......... .......... ...... 100% 7,47M=2,8s
2018-01-26 22:14:13 (394 KB/s) - ‘/tmp/RtmpIF4wAz/downloaded_packages/openssl_0.9.9.tar.gz’ saved [1112927/1112927]
--2018-01-26 22:14:13-- https://cran.rstudio.com/src/contrib/httr_1.3.1.tar.gz
Resolving cran.rstudio.com (cran.rstudio.com)... 54.230.27.181
Connecting to cran.rstudio.com (cran.rstudio.com)|54.230.27.181|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 147593 (144K) [application/x-gzip]
Saving to: ‘/tmp/RtmpIF4wAz/downloaded_packages/httr_1.3.1.tar.gz’
0K .......... .......... .......... .......... .......... 34% 934K 0s
50K .......... .......... .......... .......... .......... 69% 100K 0s
100K .......... .......... .......... .......... .... 100% 342K=0,7s
2018-01-26 22:14:15 (212 KB/s) - ‘/tmp/RtmpIF4wAz/downloaded_packages/httr_1.3.1.tar.gz’ saved [147593/147593]
--2018-01-26 22:14:15-- https://cran.rstudio.com/src/contrib/git2r_0.21.0.tar.gz
Resolving cran.rstudio.com (cran.rstudio.com)... 54.230.27.181
Connecting to cran.rstudio.com (cran.rstudio.com)|54.230.27.181|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1155512 (1,1M) [application/x-gzip]
Saving to: ‘/tmp/RtmpIF4wAz/downloaded_packages/git2r_0.21.0.tar.gz’
0K .......... .......... .......... .......... .......... 4% 1,06M 1s
50K .......... .......... .......... .......... .......... 8% 1,52M 1s
100K .......... .......... .......... .......... .......... 13% 1,28M 1s
150K .......... .......... .......... .......... .......... 17% 1,54M 1s
200K .......... .......... .......... .......... .......... 22% 6,96M 1s
250K .......... .......... .......... .......... .......... 26% 1,10M 1s
300K .......... .......... .......... .......... .......... 31% 1,21M 1s
350K .......... .......... .......... .......... .......... 35% 940K 1s
400K .......... .......... .......... .......... .......... 39% 1,72M 0s
450K .......... .......... .......... .......... .......... 44% 5,84M 0s
500K .......... .......... .......... .......... .......... 48% 1,38M 0s
550K .......... .......... .......... .......... .......... 53% 2,17M 0s
600K .......... .......... .......... .......... .......... 57% 2,20M 0s
650K .......... .......... .......... .......... .......... 62% 5,09M 0s
700K .......... .......... .......... .......... .......... 66% 2,36M 0s
750K .......... .......... .......... .......... .......... 70% 3,40M 0s
800K .......... .......... .......... .......... .......... 75% 1,73M 0s
850K .......... .......... .......... .......... .......... 79% 2,03M 0s
900K .......... .......... .......... .......... .......... 84% 42,4M 0s
950K .......... .......... .......... .......... .......... 88% 2,49M 0s
1000K .......... .......... .......... .......... .......... 93% 1,68M 0s
1050K .......... .......... .......... .......... .......... 97% 3,40M 0s
1100K .......... .......... ........ 100% 83,9M=0,6s
2018-01-26 22:14:16 (1,93 MB/s) - ‘/tmp/RtmpIF4wAz/downloaded_packages/git2r_0.21.0.tar.gz’ saved [1155512/1155512]
--2018-01-26 22:14:16-- https://cran.rstudio.com/src/contrib/devtools_1.13.4.tar.gz
Resolving cran.rstudio.com (cran.rstudio.com)... 54.230.27.181
Connecting to cran.rstudio.com (cran.rstudio.com)|54.230.27.181|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 486348 (475K) [application/x-gzip]
Saving to: ‘/tmp/RtmpIF4wAz/downloaded_packages/devtools_1.13.4.tar.gz’
0K .......... .......... .......... .......... .......... 10% 1,10M 0s
50K .......... .......... .......... .......... .......... 21% 1,40M 0s
100K .......... .......... .......... .......... .......... 31% 1,54M 0s
150K .......... .......... .......... .......... .......... 42% 1,72M 0s
200K .......... .......... .......... .......... .......... 52% 2,99M 0s
250K .......... .......... .......... .......... .......... 63% 1,54M 0s
300K .......... .......... .......... .......... .......... 73% 867K 0s
350K .......... .......... .......... .......... .......... 84% 2,16M 0s
400K .......... .......... .......... .......... .......... 94% 3,66M 0s
450K .......... .......... .... 100% 8,73M=0,3s
2018-01-26 22:14:17 (1,63 MB/s) - ‘/tmp/RtmpIF4wAz/downloaded_packages/devtools_1.13.4.tar.gz’ saved [486348/486348]
* installing *source* package ‘curl’ ...
** package ‘curl’ successfully unpacked and MD5 sums checked
Package libcurl was not found in the pkg-config search path.
Perhaps you should add the directory containing `libcurl.pc'
to the PKG_CONFIG_PATH environment variable
No package 'libcurl' found
Package libcurl was not found in the pkg-config search path.
Perhaps you should add the directory containing `libcurl.pc'
to the PKG_CONFIG_PATH environment variable
No package 'libcurl' found
Using PKG_CFLAGS=
Using PKG_LIBS=-lcurl
------------------------- ANTICONF ERROR ---------------------------
Configuration failed because libcurl was not found. Try installing:
* deb: libcurl4-openssl-dev (Debian, Ubuntu, etc)
* rpm: libcurl-devel (Fedora, CentOS, RHEL)
* csw: libcurl_dev (Solaris)
If libcurl is already installed, check that 'pkg-config' is in your
PATH and PKG_CONFIG_PATH contains a libcurl.pc file. If pkg-config
is unavailable you can set INCLUDE_DIR and LIB_DIR manually via:
R CMD INSTALL --configure-vars='INCLUDE_DIR=... LIB_DIR=...'
--------------------------------------------------------------------
ERROR: configuration failed for package ‘curl’
* removing ‘/home/stefan/R/x86_64-pc-linux-gnu-library/3.2/curl’
Warning in install.packages :
installation of package ‘curl’ had non-zero exit status
* installing *source* package ‘openssl’ ...
** package ‘openssl’ successfully unpacked and MD5 sums checked
Using PKG_CFLAGS=
------------------------- ANTICONF ERROR ---------------------------
Configuration failed because openssl was not found. Try installing:
* deb: libssl-dev (Debian, Ubuntu, etc)
* rpm: openssl-devel (Fedora, CentOS, RHEL)
* csw: libssl_dev (Solaris)
* brew: openssl@1.1 (Mac OSX)
If openssl is already installed, check that 'pkg-config' is in your
PATH and PKG_CONFIG_PATH contains a openssl.pc file. If pkg-config
is unavailable you can set INCLUDE_DIR and LIB_DIR manually via:
R CMD INSTALL --configure-vars='INCLUDE_DIR=... LIB_DIR=...'
--------------------------------------------------------------------
ERROR: configuration failed for package ‘openssl’
* removing ‘/home/stefan/R/x86_64-pc-linux-gnu-library/3.2/openssl’
Warning in install.packages :
installation of package ‘openssl’ had non-zero exit status
* installing *source* package ‘git2r’ ...
** package ‘git2r’ successfully unpacked and MD5 sums checked
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking how to run the C preprocessor... gcc -std=gnu99 -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking size of void*... 8
checking for library containing inflate... -lz
checking for library containing EVP_EncryptInit... no
checking for openssl... no
configure: error: in `/tmp/RtmpQ9e11v/R.INSTALL82977388520/git2r':
configure: error:
---------------------------------------------
The OpenSSL library that is required to
build git2r was not found.
Please install:
libssl-dev (package on e.g. Debian and Ubuntu)
openssl-devel (package on e.g. Fedora, CentOS and RHEL)
openssl (Homebrew package on OS X)
and try again.
If the OpenSSL library is installed on
your system but the git2r configuration
is unable to find it, you can specify
the include and lib path to OpenSSL with:
R CMD INSTALL --configure-args='--with-libssl-include=INCLUDE_PATH --with-libssl-lib=LIB_PATH' git2r
---------------------------------------------
See `config.log' for more details
ERROR: configuration failed for package ‘git2r’
* removing ‘/home/stefan/R/x86_64-pc-linux-gnu-library/3.2/git2r’
Warning in install.packages :
installation of package ‘git2r’ had non-zero exit status
ERROR: dependencies ‘curl’, ‘openssl’ are not available for package ‘httr’
* removing ‘/home/stefan/R/x86_64-pc-linux-gnu-library/3.2/httr’
Warning in install.packages :
installation of package ‘httr’ had non-zero exit status
ERROR: dependencies ‘httr’, ‘git2r’ are not available for package ‘devtools’
* removing ‘/home/stefan/R/x86_64-pc-linux-gnu-library/3.2/devtools’
Warning in install.packages :
installation of package ‘devtools’ had non-zero exit status
The downloaded source packages are in
‘/tmp/RtmpIF4wAz/downloaded_packages’
任何想法我怎么能安装它？问题是相同的，如果我使用而不是Rstudio我使用终端R
同样从github安装汽车包，因为我在Tools-＆gt; Install Packages列表中找不到它有问题：
> library(devtools)
> install_github("cran/car")
Downloading GitHub repo cran/car@master
from URL https://api.github.com/repos/cran/car/zipball/master
Installing car
--2018-01-26 22:39:07-- https://cran.rstudio.com/src/contrib/pbkrtest_0.4-7.tar.gz
Resolving cran.rstudio.com (cran.rstudio.com)... 54.230.27.181
Connecting to cran.rstudio.com (cran.rstudio.com)|54.230.27.181|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 156406 (153K) [application/x-gzip]
Saving to: ‘/tmp/RtmpIF4wAz/pbkrtest_0.4-7.tar.gz’
0K .......... .......... .......... .......... .......... 32% 1,16M 0s
50K .......... .......... .......... .......... .......... 65% 1,45M 0s
100K .......... .......... .......... .......... .......... 98% 3,79M 0s
150K .. 100% 8,52M=0,09s
2018-01-26 22:39:07 (1,68 MB/s) - ‘/tmp/RtmpIF4wAz/pbkrtest_0.4-7.tar.gz’ saved [156406/156406]
Installing pbkrtest
--2018-01-26 22:39:11-- https://cran.rstudio.com/src/contrib/lme4_1.1-15.tar.gz
Resolving cran.rstudio.com (cran.rstudio.com)... 54.230.27.181
Connecting to cran.rstudio.com (cran.rstudio.com)|54.230.27.181|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 3610706 (3,4M) [application/x-gzip]
Saving to: ‘/tmp/RtmpIF4wAz/lme4_1.1-15.tar.gz’
0K .......... .......... .......... .......... .......... 1% 1,05M 3s
50K .......... .......... .......... .......... .......... 2% 1,52M 3s
100K .......... .......... .......... .......... .......... 4% 3,40M 2s
150K .......... .......... .......... .......... .......... 5% 1,36M 2s
200K .......... .......... .......... .......... .......... 7% 3,97M 2s
250K .......... .......... .......... .......... .......... 8% 15,4M 2s
300K .......... .......... .......... .......... .......... 9% 2,23M 2s
350K .......... .......... .......... .......... .......... 11% 65,5M 1s
400K .......... .......... .......... .......... .......... 12% 3,85M 1s
450K .......... .......... .......... .......... .......... 14% 60,4M 1s
500K .......... .......... .......... .......... .......... 15% 79,4M 1s
550K .......... .......... .......... .......... .......... 17% 6,83M 1s
600K .......... .......... .......... .......... .......... 18% 2,60M 1s
650K .......... .......... .......... .......... .......... 19% 4,68M 1s
700K .......... .......... .......... .......... .......... 21% 83,6M 1s
750K .......... .......... .......... .......... .......... 22% 91,2M 1s
800K .......... .......... .......... .......... .......... 24% 96,8M 1s
850K .......... .......... .......... .......... .......... 25% 4,27M 1s
900K .......... .......... .......... .......... .......... 26% 91,6M 1s
950K .......... .......... .......... .......... .......... 28% 1,39M 1s
1000K .......... .......... .......... .......... .......... 29% 3,98M 1s
1050K .......... .......... .......... .......... .......... 31% 27,1M 1s
1100K .......... .......... .......... .......... .......... 32% 91,8M 1s
1150K .......... .......... .......... .......... .......... 34% 86,4M 1s
1200K .......... .......... .......... .......... .......... 35% 3,19M 1s
1250K .......... .......... .......... .......... .......... 36% 5,66M 1s
1300K .......... .......... .......... .......... .......... 38% 43,6M 0s
1350K .......... .......... .......... .......... .......... 39% 86,1M 0s
1400K .......... .......... .......... .......... .......... 41% 5,28M 0s
1450K .......... .......... .......... .......... .......... 42% 16,6M 0s
1500K .......... .......... .......... .......... .......... 43% 9,84M 0s
1550K .......... .......... .......... .......... .......... 45% 3,84M 0s
1600K .......... .......... .......... .......... .......... 46% 4,36M 0s
1650K .......... .......... .......... .......... .......... 48% 19,5M 0s
1700K .......... .......... .......... .......... .......... 49% 4,09M 0s
1750K .......... .......... .......... .......... .......... 51% 84,7M 0s
1800K .......... .......... .......... .......... .......... 52% 1,32M 0s
1850K .......... .......... .......... .......... .......... 53% 104M 0s
1900K .......... .......... .......... .......... .......... 55% 14,4M 0s
1950K .......... .......... .......... .......... .......... 56% 23,1M 0s
2000K .......... .......... .......... .......... .......... 58% 3,18M 0s
2050K .......... .......... .......... .......... .......... 59% 2,28M 0s
2100K .......... .......... .......... .......... .......... 60% 103M 0s
2150K .......... .......... .......... .......... .......... 62% 2,08M 0s
2200K .......... .......... .......... .......... .......... 63% 13,6M 0s
2250K .......... .......... .......... .......... .......... 65% 3,23M 0s
2300K .......... .......... .......... .......... .......... 66% 4,50M 0s
2350K .......... .......... .......... .......... .......... 68% 13,9M 0s
2400K .......... .......... .......... .......... .......... 69% 98,1M 0s
2450K .......... .......... .......... .......... .......... 70% 42,6M 0s
2500K .......... .......... .......... .......... .......... 72% 4,12M 0s
2550K .......... .......... .......... .......... .......... 73% 17,2M 0s
2600K .......... .......... .......... .......... .......... 75% 73,7M 0s
2650K .......... .......... .......... .......... .......... 76% 94,0M 0s
2700K .......... .......... .......... .......... .......... 77% 102M 0s
2750K .......... .......... .......... .......... .......... 79% 80,8M 0s
2800K .......... .......... .......... .......... .......... 80% 101M 0s
2850K .......... .......... .......... .......... .......... 82% 3,39M 0s
2900K .......... .......... .......... .......... .......... 83% 89,8M 0s
2950K .......... .......... .......... .......... .......... 85% 88,7M 0s
3000K .......... .......... .......... .......... .......... 86% 82,8M 0s
3050K .......... .......... .......... .......... .......... 87% 7,12M 0s
3100K .......... .......... .......... .......... .......... 89% 80,9M 0s
3150K .......... .......... .......... .......... .......... 90% 79,9M 0s
3200K .......... .......... .......... .......... .......... 92% 7,38M 0s
3250K .......... .......... .......... .......... .......... 93% 100M 0s
3300K .......... .......... .......... .......... .......... 95% 88,2M 0s
3350K .......... .......... .......... .......... .......... 96% 9,04M 0s
3400K .......... .......... .......... .......... .......... 97% 11,9M 0s
3450K .......... .......... .......... .......... .......... 99% 99,2M 0s
3500K .......... .......... ...... 100% 97,2M=0,6s
2018-01-26 22:39:12 (6,14 MB/s) - ‘/tmp/RtmpIF4wAz/lme4_1.1-15.tar.gz’ saved [3610706/3610706]
Installing lme4
--2018-01-26 22:39:20-- https://cran.rstudio.com/src/contrib/nloptr_1.0.4.tar.gz
Resolving cran.rstudio.com (cran.rstudio.com)... 54.230.27.181
Connecting to cran.rstudio.com (cran.rstudio.com)|54.230.27.181|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 353957 (346K) [application/x-gzip]
Saving to: ‘/tmp/RtmpIF4wAz/nloptr_1.0.4.tar.gz’
0K .......... .......... .......... .......... .......... 14% 1,11M 0s
50K .......... .......... .......... .......... .......... 28% 106K 1s
100K .......... .......... .......... .......... .......... 43% 644K 1s
150K .......... .......... .......... .......... .......... 57% 677K 0s
200K .......... .......... .......... .......... .......... 72% 5,64M 0s
250K .......... .......... .......... .......... .......... 86% 628K 0s
300K .......... .......... .......... .......... ..... 100% 2,39M=0,8s
2018-01-26 22:39:22 (448 KB/s) - ‘/tmp/RtmpIF4wAz/nloptr_1.0.4.tar.gz’ saved [353957/353957]
Installing nloptr
'/usr/lib/R/bin/R' --no-site-file --no-environ --no-save --no-restore --quiet CMD INSTALL \
'/tmp/RtmpIF4wAz/devtools756410ec724/nloptr' --library='/home/stefan/R/x86_64-pc-linux-gnu-library/3.2' --install-tests
ERROR: failed to lock directory ‘/home/stefan/R/x86_64-pc-linux-gnu-library/3.2’ for modifying
Try removing ‘/home/stefan/R/x86_64-pc-linux-gnu-library/3.2/00LOCK-nloptr’
Installation failed: Command failed (3)
'/usr/lib/R/bin/R' --no-site-file --no-environ --no-save --no-restore --quiet CMD INSTALL '/tmp/RtmpIF4wAz/devtools7561eb5da54/lme4' \
--library='/home/stefan/R/x86_64-pc-linux-gnu-library/3.2' --install-tests
ERROR: dependency ‘nloptr’ is not available for package ‘lme4’
* removing ‘/home/stefan/R/x86_64-pc-linux-gnu-library/3.2/lme4’
Installation failed: Command failed (1)
'/usr/lib/R/bin/R' --no-site-file --no-environ --no-save --no-restore --quiet CMD INSTALL \
'/tmp/RtmpIF4wAz/devtools75623bf595c/pbkrtest' --library='/home/stefan/R/x86_64-pc-linux-gnu-library/3.2' --install-tests
ERROR: dependency ‘lme4’ is not available for package ‘pbkrtest’
* removing ‘/home/stefan/R/x86_64-pc-linux-gnu-library/3.2/pbkrtest’
Installation failed: Command failed (1)
'/usr/lib/R/bin/R' --no-site-file --no-environ --no-save --no-restore --quiet CMD INSTALL \
'/tmp/RtmpIF4wAz/devtools75635e8f138/cran-car-4f39fce' --library='/home/stefan/R/x86_64-pc-linux-gnu-library/3.2' --install-tests
ERROR: dependency ‘pbkrtest’ is not available for package ‘car’
* removing ‘/home/stefan/R/x86_64-pc-linux-gnu-library/3.2/car’
Installation failed: Command failed (1)
答案 0 :(得分：6)
当然，答案在你粘贴的输出中。您需要在操作系统中安装（而不是在R中）以下依赖项：
libcurl4-OpenSSL的-dev的 的libssl-dev的
要安装它们，请在终端中运行：
sudo apt-get update
sudo apt-get install libcurl4-openssl-dev
sudo apt-get install libssl-dev
然后转到R并尝试重新安装“devtools”。
答案 1 :(得分：1)
猜测您需要添加
sudo apt-get install libxml2-dev
也。这是因为devtools也需要软件包xml2。
答案 2 :(得分：0)
从 Ubuntu 20.0 开始，devtools 可用作 r-cran ubuntu 包。 https://packages.ubuntu.com/groovy/r-cran-devtools
使用 sudo apt-get install r-cran-devtools 安装