如何在同一系统中的2个GPU之间切换？

Question

首先，我是新手与GPU合作，所以如果我错了请纠正我。我有一个带2个GPU卡的HP-z440盒子 **

  

  
1. AMD / ATI Firepro W2100
  
2. AMD / ATI Firepro W5100
  

** 我正在研究SLES 12操作系统我已经在HP官方网站上安装了相应的驱动程序。

    linux:~ # lspci -v | grep -A 15 VGA
02:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Oland                                                                                         GL [FirePro W2100] (prog-if 00 [VGA controller])
        Subsystem: Hewlett-Packard Company Device 2120
        Physical Slot: 2
        Flags: bus master, fast devsel, latency 0, IRQ 94
        Memory at d0000000 (64-bit, prefetchable) [size=256M]
        Memory at f0d00000 (64-bit, non-prefetchable) [size=256K]
        I/O ports at 2000 [size=256]
        Expansion ROM at f0d60000 [disabled] [size=128K]
        Capabilities: [48] Vendor Specific Information: Len=08 <?>
        Capabilities: [50] Power Management version 3
        Capabilities: [58] Express Legacy Endpoint, MSI 00
        Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
        Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <                                                                                        ?>
        Capabilities: [150] Advanced Error Reporting
        Capabilities: [200] #15
        Capabilities: [270] #19

03:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Bonair                                                                                        e [FirePro W5100] (prog-if 00 [VGA controller])
        Subsystem: Hewlett-Packard Company Device 0b0c
        Physical Slot: 5
        Flags: bus master, fast devsel, latency 0, IRQ 93
        Memory at e0000000 (64-bit, prefetchable) [size=256M]
        Memory at f0000000 (64-bit, prefetchable) [size=8M]
        I/O ports at 1000 [size=256]
        Memory at f0c00000 (32-bit, non-prefetchable) [size=256K]
        Expansion ROM at f0c60000 [disabled] [size=128K]
        Capabilities: [48] Vendor Specific Information: Len=08 <?>
        Capabilities: [50] Power Management version 3
        Capabilities: [58] Express Legacy Endpoint, MSI 00
        Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
        Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <                                                                                        ?>
        Capabilities: [150] Advanced Error Reporting
        Capabilities: [200] #15

和

   Linux:~#` aticonfig --odgc

    Default Adapter - AMD FirePro W2100 (FireGL V)
                                Core (MHz)    Memory (MHz)
               Current Clocks :    300           300
                 Current Peak :    680           900
      Configurable Peak Range : [300-1000]     [300-1000]
                     GPU load :    0%

~

我认为一次只能使用1张GPU卡。 我希望GPU卡都可以工作，这可能吗？ 或者我想在这些卡之间切换。

请帮忙。

Answer 1

一般来说，不建议连接两个不同的图形卡，并且可能无法按预期运行。 对于AMD GPU，您必须使用“Crossfire Bridge”连接两张卡：

这是一个小而宽的电缆，应该与GPU一起提供。 还有一个设置可以在驱动程序软件中打开和关闭Crossfire，但默认情况下应该打开。

要在卡片之间切换，只需将显示器插入所选卡片即可。