我是Waspmote的新手,为一堂课做了一些项目。任务是通过LoRaWAN发送/接收数据。我尝试了默认示例,并注意到我只能通过LoRaWAN发送十六进制。我无法发送“你好世界”#39;例如。有谁知道如何配置从ASCII发送所有字符?
#include <WaspLoRaWAN.h>
//////////////////////////////////////////////
uint8_t socket = SOCKET0;
//////////////////////////////////////////////
// define radio settings
//////////////////////////////////////////////
uint8_t power = 15;
uint32_t frequency;
char spreading_factor[] = "sf12";
char coding_rate[] = "4/5";
uint16_t bandwidth = 125;
char crc_mode[] = "on";
//////////////////////////////////////////////
// define data to send
char data[] = "0102030405060708090A0B0C0D0E0F";
// variable
uint8_t error;
void setup() {
USB.ON();
USB.println(F("Radio P2P example - Sending packets\n"));
// module setup
error = radioModuleSetup();
// Check status
if (error == 0) {
USB.println(F("Module configured OK"));
} else {
USB.println(F("Module configured ERROR"));
}
}
void loop() {
// Send packet
error = LoRaWAN.sendRadio(data);
// Check status
if (error == 0) {
USB.println(F("--> Packet sent OK"));
} else {
USB.print(F("Error waiting for packets. error = "));
USB.println(error, DEC);
}
delay(5000);
}
当我更改data[]
时,它可以正常工作,但只能使用十六进制字符。
接下来是接收代码:
#include <WaspLoRaWAN.h>
//////////////////////////////////////////////
uint8_t socket = SOCKET0;
//////////////////////////////////////////////
// define radio settings
//////////////////////////////////////////////
uint8_t power = 15;
uint32_t frequency;
char spreading_factor[] = "sf12";
char coding_rate[] = "4/5";
uint16_t bandwidth = 125;
char crc_mode[] = "on";
//////////////////////////////////////////////
// variable
uint8_t error;
void setup() {
USB.ON();
USB.println(F("Radio P2P example - Receiving packets\n"));
// module setup
error = radioModuleSetup();
// Check status
if (error == 0) {
USB.println(F("Module configured OK"));
} else {
USB.println(F("Module configured ERROR"));
}
}
void loop() {
USB.println(F("\nListening to packets..."));
// rx
error = LoRaWAN.receiveRadio(10000);
// Check status
if (error == 0) {
USB.println(F("--> Packet received"));
USB.print(F("packet: "));
USB.println((char*) LoRaWAN._buffer);
USB.print(F("length: "));
USB.println(LoRaWAN._length);
// get SNR
LoRaWAN.getRadioSNR();
USB.print(F("SNR: "));
USB.println(LoRaWAN._radioSNR);
} else {
// error code
// 1: error
// 2: no incoming packet
USB.print(F("Error waiting for packets. error = "));
USB.println(error, DEC);
}
}
答案 0 :(得分:2)
你需要转换你想要的字符串&#34; hello world&#34;到十六进制字符串。
转换功能:
bool string_to_hexstring(char *string, char *hexstring, uint16_t hexstring_length)
{
uint16_t hexstring_index = 0;
while(string[hexstring_index/2] != 0 && hexstring_index < hexstring_length-2)
{
char c = string[hexstring_index/2];
byte nib1 = (c >> 4) & 0x0F;
byte nib2 = (c >> 0) & 0x0F;
hexstring[hexstring_index++] = nib1 < 0xA ? '0' + nib1 : 'A' + nib1 - 0xA;
hexstring[hexstring_index++] = nib2 < 0xA ? '0' + nib2 : 'A' + nib2 - 0xA;
}
hexstring[hexstring_index++] = 0;
return string[hexstring_index/2] == 0;
}
稍后在您的代码中:
char buffer[32]; // needs to be at least two times the string size + 1
if (!string_to_hexstring("hello world", buffer, sizeof(buffer))) {
// buffer size too small
}
error = LoRaWAN.sendRadio(buffer);