我尝试使用地址和订单列系列创建“客户”表，但收到以下错误
命令是：
hbase(main):003:0> create 'customer', 'address', 'order'
错误：
ERROR: Can't get master address from ZooKeeper; znode data == null
Creates a table. Pass a table name, and a set of column family
specifications (at least one), and, optionally, table configuration.
Column specification can be a simple string (name), or a dictionary
(dictionaries are described below in main help output), necessarily
including NAME attribute.
Examples:
Create a table with namespace=ns1 and table qualifier=t1
hbase> create 'ns1:t1', {NAME => 'f1', VERSIONS => 5}
Create a table with namespace=default and table qualifier=t1
hbase> create 't1', {NAME => 'f1'}, {NAME => 'f2'}, {NAME => 'f3'}
hbase> # The above in shorthand would be the following:
hbase> create 't1', 'f1', 'f2', 'f3'
hbase> create 't1', {NAME => 'f1', VERSIONS => 1, TTL => 2592000, BLOCKCACHE => true}
hbase> create 't1', {NAME => 'f1', CONFIGURATION => {'hbase.hstore.blockingStoreFiles' => '10'}}
hbase> create 't1', {NAME => 'f1', IS_MOB => true, MOB_THRESHOLD => 1000000, MOB_COMPACT_PARTITION_POLICY => 'weekly'}
Table configuration options can be put at the end.
Examples:
hbase> create 'ns1:t1', 'f1', SPLITS => ['10', '20', '30', '40']
hbase> create 't1', 'f1', SPLITS => ['10', '20', '30', '40']
hbase> create 't1', 'f1', SPLITS_FILE => 'splits.txt', OWNER => 'johndoe'
hbase> create 't1', {NAME => 'f1', VERSIONS => 5}, METADATA => { 'mykey' => 'myvalue' }
hbase> # Optionally pre-split the table into NUMREGIONS, using
hbase> # SPLITALGO ("HexStringSplit", "UniformSplit" or classname)
hbase> create 't1', 'f1', {NUMREGIONS => 15, SPLITALGO => 'HexStringSplit'}
hbase> create 't1', 'f1', {NUMREGIONS => 15, SPLITALGO => 'HexStringSplit', REGION_REPLICATION => 2, CONFIGURATION => {'hbase.hregion.scan.loadColumnFamiliesOnDemand' => 'true'}}
hbase> create 't1', {NAME => 'f1', DFS_REPLICATION => 1}
You can also keep around a reference to the created table:
hbase> t1 = create 't1', 'f1'
Which gives you a reference to the table named 't1', on which you can then
call methods.
hbase(main):004:0> list
TABLE
ERROR: Can't get master address from ZooKeeper; znode data == null
List all tables in hbase. Optional regular expression parameter could
be used to filter the output. Examples:
hbase> list
hbase> list 'abc.*'
hbase> list 'ns:abc.*'
hbase> list 'ns:.*'
收到此错误后...我运行以下命令检查HBase服务状态
命令是：
[cloudera@quickstart ~]$ service --status-all
错误 -
> abrt-ccpp hook is installed abrtd (pid 5220) is running...
> abrt-dump-oops is stopped acpid (pid 4508) is running... atd (pid
> 8186) is running... auditd (pid 4351) is running...
>
> if [ "$1" == "start" ] ; then
> if [ "${EC2}" == 'true' ]; then
> FIRST_BOOT_FLAG=/var/lib/cloudera-quickstart/.ec2-key-installed
> if [ ! -f "${FIRST_BOOT_FLAG}" ]; then
> METADATA_API=http://169.254.169.254/latest/meta-data
> KEY_URL=${METADATA_API}/public-keys/0/openssh-key
> SSH_DIR=/home/cloudera/.ssh
> mkdir -p ${SSH_DIR}
> chown cloudera:cloudera ${SSH_DIR}
> curl ${KEY_URL} >> ${SSH_DIR}/authorized_keys
> touch ${FIRST_BOOT_FLAG}
> fi
> fi
> if [ "${DOCKER}" != 'true' ]; then
> if [ -f /sys/kernel/mm/redhat_transparent_hugepage/defrag ]; then
> echo never > /sys/kernel/mm/redhat_transparent_hugepage/defrag
> fi
>
> cloudera-quickstart-ip
> HOSTNAME=quickstart.cloudera
> hostname ${HOSTNAME}
> sed -i -e "s/HOSTNAME=.*/HOSTNAME=${HOSTNAME}/" /etc/sysconfig/network
> fi
>
> (
> cd /var/lib/cloudera-quickstart/tutorial;
> nohup python -m SimpleHTTPServer 80 &
> )
>
> # TODO: check for expired CM license and update config.js accordingly fi
> + '[' status == start ']'
>
> By default, the Cloudera QuickStart VM run Cloudera's Distribution
> including Apache Hadoop (CDH) under Linux's service and configuration
> management. If you wish to migrate to Cloudera Manager, you must run
> one of the following commands.
>
> To use Cloudera Express (free), run:
>
> sudo /home/cloudera/cloudera-manager --express
>
> This requires at least 8 GB of RAM and at least 2 virtual CPUs.
>
> To begin a 60-day trial of Cloudera Enterprise with advanced
> management features, run:
>
> sudo /home/cloudera/cloudera-manager --enterprise
>
> This requires at least 10 GB or RAM and at least 2 virtual CPUs.
>
> Be aware that after rebooting, it may take several minutes before
> Cloudera Manager has started all of the services it manages and is
> ready to accept connections from clients. By default, the Cloudera
> QuickStart VM run Cloudera's Distribution including Apache Hadoop
> (CDH) under Linux's service and configuration management. If you wish
> to migrate to Cloudera Manager, you must run one of the following
> commands.
>
> To use Cloudera Express (free), run:
>
> sudo /home/cloudera/cloudera-manager --express
>
> This requires at least 8 GB of RAM and at least 2 virtual CPUs.
>
> To begin a 60-day trial of Cloudera Enterprise with advanced
> management features, run:
>
> sudo /home/cloudera/cloudera-manager --enterprise
>
> This requires at least 10 GB or RAM and at least 2 virtual CPUs.
>
> Be aware that after rebooting, it may take several minutes before
> Cloudera Manager has started all of the services it manages and is
> ready to accept connections from clients. cpuspeed is stopped crond
> (pid 7327) is running... Usage: /etc/init.d/dkms_autoinstaller
> {start|stop} dnsmasq is stopped Flume NG agent is running
> [ OK ] Hadoop datanode is running [
> OK ] Hadoop journalnode is running [ OK
> ] Hadoop namenode is running [ OK ]
> Hadoop secondarynamenode is running [ OK ]
> Hadoop httpfs is running [ OK ]
> Hadoop historyserver is running [ OK ]
> Hadoop nodemanager is running [ OK ]
> Hadoop proxyserver is dead and pid file exists [FAILED]
> Hadoop resourcemanager is running [ OK ]
> hald (pid 4526) is running... HBase master daemon is not running
> [FAILED] hbase-regionserver is not running. HBase rest daemon is
> running [ OK ] HBase Solr Indexer is
> not running [FAILED] HBase thrift daemon is
> running [ OK ] Hive Metastore is running
> [ OK ] Hive Server2 is running [
> OK ] htcacheclean is stopped httpd status unknown due to insufficient
> privileges. supervisor (pid 7405) is running... Impala Catalog Server
> is running [ OK ] Impala Server is running
> [ OK ] Impala State Store Server is running [
> OK ] ip6tables: Only usable by root.
> [WARNING] iptables: Only usable by root.
> [WARNING] /etc/init.d/kdump: line 47: /var/lock/kdump: Permission
> denied lvmetad is stopped dmeventd is stopped mdmonitor status unknown
> due to insufficient privileges. messagebus (pid 4454) is running...
> mysqld (pid 12463) is running... netconsole module not loaded
> Configured devices: lo eth0 Currently active devices: lo eth0
> NetworkManager (pid 4467) is running... grep: /proc/fs/nfsd/portlist:
> No such file or directory ntpd (pid 4840) is running... running
> master status unknown due to insufficient privileges. pppoe-server is
> stopped Process accounting is disabled. quota_nld is stopped rdisc is
> stopped Low level hardware support loaded: none found
>
> Upper layer protocol modules: none found
>
> User space access modules: none found
>
> Connection management modules: none found
>
> rngd is stopped rpcbind (pid 4431) is running... rsyslogd status
> unknown due to insufficient privileges. sandbox is stopped saslauthd
> is stopped Sentry DB Store Service is dead and pid file exists
> [FAILED] smartd is stopped Solr server daemon is running
> [ OK ] Spark history-server is running [
> OK ] Sqoop Server is running [ OK
> ] sqoop-metastore is not running. /etc/init.d/sshd: line 33:
> /etc/sysconfig/sshd: Permission denied openssh-daemon (pid 4826) is
> running... The VirtualBox Additions are currently running. Checking
> for VBoxService ...running winbindd is stopped wpa_supplicant (pid
> 4525) is running... zookeeper-server is running