我阅读了一些文章并看到了Lane Detection的视频，因此决定了解它是如何工作的 我对OpenCV完全不熟悉，请原谅我愚蠢的怀疑。 我使用了Udacity Opensource Project来开发Lane Detection，但是我无法执行代码。我收到了一个我无法理解的值错误
代码：
import numpy as np
import cv2
import math
import matplotlib.pyplot as plt
def grayscale(img):
"""Applies the Grayscale transform
This will return an image with only one color channel
but NOTE: to see the returned image as grayscale
you should call plt.imshow(gray, cmap='gray')"""
return cv2.cvtColor(img, cv2.COLOR_BGR2GRAY)
def canny(img, low_threshold, high_threshold):
"""Applies the Canny transform"""
return cv2.Canny(img, low_threshold, high_threshold)
def gaussian_blur(img, kernel_size):
"""Applies a Gaussian Noise kernel"""
return cv2.GaussianBlur(img, (kernel_size, kernel_size), 0)
def region_of_interest(img, vertices):
"""
Applies an image mask.
Only keeps the region of the image defined by the polygon
formed from `vertices`. The rest of the image is set to black.
"""
# defining a blank mask to start with
mask = np.zeros_like(img)
# defining a 3 channel or 1 channel color to fill the mask with depending on the input image
if len(img.shape) > 2:
channel_count = img.shape[2] # i.e. 3 or 4 depending on your image
ignore_mask_color = (255,) * channel_count
else:
ignore_mask_color = 255
# filling pixels inside the polygon defined by "vertices" with the fill color
cv2.fillPoly(mask, vertices, ignore_mask_color)
# returning the image only where mask pixels are nonzero
masked_image = cv2.bitwise_and(img, mask)
return masked_image
def draw_lines(img, lines, color=[255, 0, 0], thickness=10):
"""
NOTE: this is the function you might want to use as a starting point once you want to
average/extrapolate the line segments you detect to map out the full
extent of the lane (going from the result shown in raw-lines-example.mp4
to that shown in P1_example.mp4).
Think about things like separating line segments by their
slope ((y2-y1)/(x2-x1)) to decide which segments are part of the left
line vs. the right line. Then, you can average the position of each of
the lines and extrapolate to the top and bottom of the lane.
This function draws `lines` with `color` and `thickness`.
Lines are drawn on the image inplace (mutates the image).
If you want to make the lines semi-transparent, think about combining
this function with the weighted_img() function below
"""
imshape = img.shape
left_x1 = []
left_x2 = []
right_x1 = []
right_x2 = []
y_min = img.shape[0]
y_max = int(img.shape[0] * 0.611)
for line in lines:
for x1, y1, x2, y2 in line:
if ((y2 - y1) / (x2 - x1)) < 0:
mc = np.polyfit([x1, x2], [y1, y2], 1)
left_x1.append(np.int(np.float((y_min - mc[1])) / np.float(mc[0])))
left_x2.append(np.int(np.float((y_max - mc[1])) / np.float(mc[0])))
# cv2.line(img, (xone, imshape[0]), (xtwo, 330), color, thickness)
elif ((y2 - y1) / (x2 - x1)) > 0:
mc = np.polyfit([x1, x2], [y1, y2], 1)
right_x1.append(np.int(np.float((y_min - mc[1])) / np.float(mc[0])))
right_x2.append(np.int(np.float((y_max - mc[1])) / np.float(mc[0])))
# cv2.line(img, (xone, imshape[0]), (xtwo, 330), color, thickness)
l_avg_x1 = np.int(np.nanmean(left_x1))
l_avg_x2 = np.int(np.nanmean(left_x2))
r_avg_x1 = np.int(np.nanmean(right_x1))
r_avg_x2 = np.int(np.nanmean(right_x2))
# print([l_avg_x1, l_avg_x2, r_avg_x1, r_avg_x2])
cv2.line(img, (l_avg_x1, y_min), (l_avg_x2, y_max), color, thickness)
cv2.line(img, (r_avg_x1, y_min), (r_avg_x2, y_max), color, thickness)
def hough_lines(img, rho, theta, threshold, min_line_len, max_line_gap):
"""
`img` should be the output of a Canny transform.
Returns an image with hough lines drawn.
"""
lines = cv2.HoughLinesP(img, rho, theta, threshold, np.array([]), minLineLength=min_line_len,
maxLineGap=max_line_gap)
line_img = np.zeros(img.shape, dtype=np.uint8)
draw_lines(line_img, lines)
return line_img
def process_image(img):
img_test = grayscale(img)
img_test = gaussian_blur(img_test, 7)
img_test = canny(img_test, 50, 150)
imshape = img.shape
vertices = np.array([[(100, imshape[0]), (400, 330), (600, 330), (imshape[1], imshape[0])]], dtype=np.int32)
img_test = region_of_interest(img_test, vertices)
rho = 2 # distance resolution in pixels of the Hough grid
theta = np.pi / 180 # angular resolution in radians of the Hough grid
threshold = 55 # minimum number of votes (intersections in Hough grid cell)
min_line_length = 40 # minimum number of pixels making up a line
max_line_gap = 100 # maximum gap in pixels between connectable line segments
line_image = np.copy(img) * 0 # creating a blank to draw lines on
img_test = hough_lines(img_test, rho, theta, threshold, min_line_length, max_line_gap)
return img_test
img = cv2.imread("sy1.jpg")
res = process_image(img)
plt.imshow(res)
结果错误：
/Users/ViditShah/anaconda/envs/py27/bin/python /Users/ViditShah/Downloads/untitled1/gist.py
/Users/ViditShah/Downloads/untitled1/gist.py:85: RuntimeWarning: Mean of empty slice
r_avg_x1 = np.int(np.nanmean(right_x1))
Traceback (most recent call last):
File "/Users/ViditShah/Downloads/untitled1/gist.py", line 122, in <module>
res = process_image(img)
File "/Users/ViditShah/Downloads/untitled1/gist.py", line 117, in process_image
img_test = hough_lines(img_test, rho, theta, threshold, min_line_length, max_line_gap)
File "/Users/ViditShah/Downloads/untitled1/gist.py", line 100, in hough_lines
draw_lines(line_img, lines)
File "/Users/ViditShah/Downloads/untitled1/gist.py", line 85, in draw_lines
r_avg_x1 = np.int(np.nanmean(right_x1))
ValueError: cannot convert float NaN to integer
Process finished with exit code 1
我正在使用python2.7
请指导我。 忠实于你的， Vidit Shah
答案 0 :(得分：0)
在计算梯度时，一种可能性是除以零创建Nans;尝试过滤掉x1 == x2。这种潜在的错误来源很少会出现。
最重要的问题是，在代码结构的霍夫变换（55）中，阈值设置得太高。如果Hough Lines阶段没有识别线条，那么您将无法绘制它们。
您可以通过降低阈值（并在线路检测中丢失质量来确定其工作时的情况）或调整代码中的其他内容来解决此问题，例如使用error handling或预处理图像的方式不同，因此霍夫步骤总会输出线条。