以下是$ipmitool -sensor
的输出,它们显示了所有DIMM信息。但FreeIPMI只有插件的DIMM信息。如何在C中使用FreeIPMI API获取所有内存DIMM信息?
$ sudo ipmitool sensor
CPU Temp | 59.000 | degrees C | ok | 0.000 | 0.000 | 0.000 | 99.000 | 104.000 | 104.000
System Temp | 35.000 | degrees C | ok | -10.000 | -5.000 | 0.000 | 80.000 | 85.000 | 90.000
Peripheral Temp | 49.000 | degrees C | ok | -10.000 | -5.000 | 0.000 | 80.000 | 85.000 | 90.000
DIMMA1 Temp | na | | na | na | na | na | na | na | na
DIMMA2 Temp | na | | na | na | na | na | na | na | na
DIMMB1 Temp | 36.000 | degrees C | ok | -5.000 | 0.000 | 5.000 | 80.000 | 85.000 | 90.000
DIMMB2 Temp | na | | na | na | na | na | na | na | na
FAN1 | 3800.000 | RPM | ok | 300.000 | 500.000 | 700.000 | 25300.000 | 25400.000 | 25500.000
FAN2 | 4100.000 | RPM | ok | 300.000 | 500.000 | 700.000 | 25300.000 | 25400.000 | 25500.000
FAN3 | 4100.000 | RPM | ok | 300.000 | 500.000 | 700.000 | 25300.000 | 25400.000 | 25500.000
FANA | 4400.000 | RPM | ok | 300.000 | 500.000 | 700.000 | 25300.000 | 25400.000 | 25500.000
12V | 12.000 | Volts | ok | 10.173 | 10.299 | 10.740 | 12.945 | 13.260 | 13.386
5VCC | 4.922 | Volts | ok | 4.246 | 4.298 | 4.480 | 5.390 | 5.546 | 5.598
3.3VCC | 3.248 | Volts | ok | 2.789 | 2.823 | 2.959 | 3.554 | 3.656 | 3.690
VBAT | 3.047 | Volts | ok | 2.375 | 2.487 | 2.599 | 3.775 | 3.887 | 3.999
Vcpu | 1.809 | Volts | ok | 1.242 | 1.260 | 1.395 | 1.899 | 2.088 | 2.106
VDIMMAB | 1.191 | Volts | ok | 0.948 | 0.975 | 1.047 | 1.344 | 1.425 | 1.443
VDIMMCD | 1.209 | Volts | ok | 0.948 | 0.975 | 1.047 | 1.344 | 1.425 | 1.443
5VSB | 4.974 | Volts | ok | 4.246 | 4.298 | 4.480 | 5.390 | 5.546 | 5.598
3.3VSB | 3.197 | Volts | ok | 2.789 | 2.823 | 2.959 | 3.554 | 3.656 | 3.690
1.5V PCH | 1.509 | Volts | ok | 1.320 | 1.347 | 1.401 | 1.644 | 1.671 | 1.698
1.2V BMC | 1.218 | Volts | ok | 1.020 | 1.047 | 1.092 | 1.344 | 1.371 | 1.398
1.05V PCH | 1.041 | Volts | ok | 0.870 | 0.897 | 0.942 | 1.194 | 1.221 | 1.248
Chassis Intru | 0x0 | discrete | 0x0000| na | na | na | na | na | na
关于内存信息,我知道DIMMA1,A2和B2不是插件,DIMMB1的温度是36.0度。
以下是FreeIPMI ipmimonitoring-sensors
的输出:
Record ID, Sensor Name, Sensor Number, Sensor Type, Sensor State, Sensor Reading, Sensor Units, Sensor Event/Reading Type Code, Sensor Event Bitmask, Sensor Event String
4, Processor 1 CPU Temp, 1, Temperature, Nominal, 60.00, C, 1h, C0h, 'OK'
71, System Board 1 System Temp, 11, Temperature, Nominal, 36.00, C, 1h, C0h, 'OK'
138, System Board 2 Peripheral Temp, 14, Temperature, Nominal, 50.00, C, 1h, C0h, 'OK'
339, Memory Device 68 DIMMB1 Temp, 180, Temperature, Nominal, 37.00, C, 1h, C0h, 'OK'
473, Fan 1 FAN1, 65, Fan, Nominal, 3800.00, RPM, 1h, C0h, 'OK'
540, Fan 2 FAN2, 66, Fan, Nominal, 4100.00, RPM, 1h, C0h, 'OK'
607, Fan 3 FAN3, 67, Fan, Nominal, 4000.00, RPM, 1h, C0h, 'OK'
674, Fan 5 FANA, 69, Fan, Nominal, 4300.00, RPM, 1h, C0h, 'OK'
741, System Board 17 12V, 48, Voltage, Nominal, 12.00, V, 1h, C0h, 'OK'
808, System Board 33 5VCC, 49, Voltage, Nominal, 4.92, V, 1h, C0h, 'OK'
875, System Board 32 3.3VCC, 50, Voltage, Nominal, 3.25, V, 1h, C0h, 'OK'
942, System Board 18 VBAT, 51, Voltage, Nominal, 3.05, V, 1h, C0h, 'OK'
1009, Processor 2 Vcpu, 52, Voltage, Nominal, 1.81, V, 1h, C0h, 'OK'
1076, Memory Device 1 VDIMMAB, 53, Voltage, Nominal, 1.19, V, 1h, C0h, 'OK'
1143, Memory Device 2 VDIMMCD, 55, Voltage, Nominal, 1.21, V, 1h, C0h, 'OK'
1210, System Board 15 5VSB, 56, Voltage, Nominal, 4.97, V, 1h, C0h, 'OK'
1277, System Board 16 3.3VSB, 57, Voltage, Nominal, 3.20, V, 1h, C0h, 'OK'
1344, System Board 19 1.5V PCH, 60, Voltage, Nominal, 1.51, V, 1h, C0h, 'OK'
1411, System Board 20 1.2V BMC, 61, Voltage, Nominal, 1.22, V, 1h, C0h, 'OK'
1478, System Board 21 1.05V PCH, 62, Voltage, Nominal, 1.04, V, 1h, C0h, 'OK'
1545, System Chassis Chassis Intru, 170, Physical Security, Nominal, N/A, N/A, 6Fh, 0h, 'OK'
但没有关于DIMMA1,A2和B2的信息,因为它们不是插件。所以我追踪了impi-monitoring-sensor.c的代码。
if ((sensor_count = ipmi_monitoring_sensor_readings_by_record_id (ctx,
hostname,
ipmi_config,
sensor_reading_flags,
NULL, /* record_ids */
0, /* record_ids_length */
NULL,
NULL)) < 0)
和配置
static void
_init_ipmi_config (struct ipmi_monitoring_ipmi_config *ipmi_config)
{
assert (ipmi_config);
ipmi_config->driver_type = driver_type;
ipmi_config->disable_auto_probe = disable_auto_probe;
ipmi_config->driver_address = driver_address;
ipmi_config->register_spacing = register_spacing;
ipmi_config->driver_device = driver_device;
ipmi_config->protocol_version = protocol_version;
ipmi_config->username = username;
ipmi_config->password = password;
ipmi_config->k_g = k_g;
ipmi_config->k_g_len = k_g_len;
ipmi_config->privilege_level = privilege_level;
ipmi_config->authentication_type = authentication_type;
ipmi_config->cipher_suite_id = cipher_suite_id;
ipmi_config->session_timeout_len = session_timeout;
ipmi_config->retransmission_timeout_len = retransmission_timeout;
ipmi_config->workaround_flags = workaround_flags;
}
我可以假设主板有4个DIMM插槽,如果在FreeIPMI传感器输出中找不到它们,我猜它们不是插件。但是如何通过IPMI命令知道主板上的所有DIMM插槽?
答案 0 :(得分:0)
FreeIPMI维护者在这里。一般来说,FreeIPMI中的大多数工具都不会输出有关传感器的信息(如果它不可用&#34;)。 (在内部,它映射到我不会详细说明的各种事情。)无论可用性如何,默认情况下ipmitool会输出一些传感器信息。
根据您关于使用IPMI命令的问题。使用FreeIPMI的ipmi-sensors,您可以使用-v(或可能的-vv)查看剩余的DIMM。
根据关于API的标题中的问题,在libipmimonitoring API中,键标志为IPMI_MONITORING_SENSOR_READING_FLAGS_IGNORE_NON_INTERPRETABLE_SENSORS。在示例代码中查找它,您可能会看到该怎么做。