Question

我有以下.geo for GMSH：

cl__1 = 1.125;
Point(1) = {0, 0, 0, cl__1};
Point(2) = {1, 0, 0, cl__1};
Point(3) = {1, 1, 0, cl__1};
Point(4) = {0, 1, 0, cl__1};
Point(5) = {0.350000,0.100000,cl__1};
Point(6) = {0.350000,0.350000,cl__1};
Point(7) = {0.100000,0.350000,cl__1};
Point(8) = {0.85,0.85,cl__1};
Line(1) = {1, 2};
Line(2) = {2, 3};
Line(3) = {3, 4};
Line(4) = {4, 1};
Circle(5) = {5,6,7};
Line(6) = {7,8};
Line(7) = {8,5};
Line Loop(1) = {1, 2, 3, 4};
Line Loop(2) = {5,6,7};
Plane Surface(1) = {1,2};
Plane Surface(2) = {2};
Circle {5} In Surface {2};
Line {6} In Surface {2};
Line {7} In Surface {2};

我已经绘制了我想要构建的几何体，但不知何故Gmsh仅在Plane Surface 2内部进行网格划分。这段代码有什么问题吗？

Answer 1

点5 - 8的点定义不在平面中z = 0它们在平面内（z = cl_1）。建议，当您编写此类文件时，请尝试按以下方式排列：

cl_1 = 1.125;
Point(1) = {0       , 0       , 0, cl_1};
Point(2) = {1       , 0       , 0, cl_1};
Point(3) = {1       , 1       , 0, cl_1};
Point(4) = {0       , 1       , 0, cl_1};
Point(5) = {0.350000, 0.100000, 0, cl_1};
Point(6) = {0.350000, 0.350000, 0, cl_1};
Point(7) = {0.100000, 0.350000, 0, cl_1};
Point(8) = {0.85    , 0.85    , 0, cl_1};
Line(1) = {1, 2};
Line(2) = {2, 3};
Line(3) = {3, 4};
Line(4) = {4, 1};
Circle(5) = {5,6,7};
Line(6) = {7,8};
Line(7) = {8,5};
Line Loop(1) = {1, 2, 3, 4};
Line Loop(2) = {5,6,7};
Plane Surface(8) = {1, 2};
Plane Surface(9) = {2};

只有通过检查才能节省大量时间。

两种材料圆形网 - Gmsh

1 个答案: