Question

我使用WCF客户端向WCF服务发送msmq消息，在WCF服务处理msmq消息之前，我想检查消息正文。
在检查了msmq消息体的内容后，我得到了以下结果
但是，我没能得到确切的字符串以下是WCF服务的定义

    [ServiceContract]
public interface IMSMQService
{

    [OperationContract(IsOneWay = true)]       

    void ShowMessage(string msg);
}

我使用下面的方法来检索邮件正文，并输出为空，如果我在ms上添加监视，我可以得到

“\ 0 \ U0001 \ 0 \ U0001 \ U0004 \ U0002（net.msmq：// VDI-V-tazho /私人/ TestQueue \ U0003 \ AV \ U0002符\ v \ u0001s \ U0004符\ v \ u0001a \ u0006V \ BD \ n \ u001e \ 0+ http://tempuri.org/IMSMQService/ShowMessage@ \ u0017VsDebuggerCausalityData \ bAhttp：//schemas.microsoft.com/vstudio/diagnostics/servicemodelsink<ϣ-lNFoJ0u \ u0006 \“\ 0 \ 0 \ 0 \ 0 \ u0017 \ 0i8CI \ 7 ^ QA \ u0012w} \为fA \ u000f \ rޮPE \ 0 \吨\ 0 \ 0D \˚F\ u001e \ 0（net.msmq：// VDI-v-tazho /私人/ TestQueue \ u0001V \ u000e @ \ vShowMessage \ b \ u0013http：//tempuri.org/@ \ u0003msg \ u0004test \ U0001 \ U0001 \ U0001"

                //message.Formatter = new XmlMessageFormatter(new String[] { });
            //StreamReader sr = new StreamReader(message.BodyStream);
            string ms = "";
            //while (sr.Peek() >= 0)
            //{
            //    ms += sr.ReadLine();
            //}
            message.Formatter = new ActiveXMessageFormatter();
            string result = System.Text.Encoding.UTF8.GetString(message.Body as byte[]);
            StreamReader reader = new StreamReader(message.BodyStream);

            ms = reader.ReadToEnd();
            MessageBox.Show(ms);

Answer 1

我得到了以下代码来实现我的要求。

private void MSMQStringBody_Click(object sender, EventArgs e)
{
    System.Messaging.MessageQueue[] queueList = System.Messaging.MessageQueue.GetPrivateQueuesByMachine(Environment.MachineName);
    MessageQueue myQueue = queueList[1];
    List<System.Messaging.Message> messages = myQueue.GetAllMessages().ToList();
    foreach (System.Messaging.Message message in messages)
    {
        System.Xml.XmlDocument result = ConvertToXMLDoc(message);
        MessageBox.Show(result.InnerText);
    }

}
public System.Xml.XmlDocument ConvertToXMLDoc(System.Messaging.Message msg)
{
    byte[] buffer = new byte[msg.BodyStream.Length];
    msg.BodyStream.Read(buffer, 0, (int)msg.BodyStream.Length);
    int envelopeStart = FindEnvolopeStart(buffer);
    System.IO.MemoryStream stream = new System.IO.MemoryStream(buffer, envelopeStart, buffer.Length - envelopeStart);
    System.ServiceModel.Channels.BinaryMessageEncodingBindingElement elm = new System.ServiceModel.Channels.BinaryMessageEncodingBindingElement();
    System.ServiceModel.Channels.Message msg1 = elm.CreateMessageEncoderFactory().Encoder.ReadMessage(stream, Int32.MaxValue);
    System.Xml.XmlDocument doc = new System.Xml.XmlDocument();
    doc.Load(msg1.GetReaderAtBodyContents());
    msg.BodyStream.Position = 0;
    return doc;
}
private int FindEnvolopeStart(byte[] stream)
{
    int i = 0;
    byte prevByte = stream[i];
    byte curByte = (byte)0;
    for (i = 0; i < stream.Length; i++)
    {
        curByte = stream[i];
        if (curByte == (byte)0x02 &&
        prevByte == (byte)0x56)
            break;
        prevByte = curByte;
    }
    return i - 1;
}

Answer 2

当您向/从MSMQ发送/检索邮件正文时，您应该使用相同的“类型”。请参阅下面的通用类型“T”。 T可以是您的任何自定义类。

    public T GetQueueMessage()
    {
        Message message = queue.Receive(new TimeSpan(0, 0, 0, 1, 0));
        return (T)message.Body;
    }

    public void InsertQueueMessage(T message)
    {
        using (Message msg = new Message((object)message))
        {
            queue.Send(msg, MessageQueueTransactionType.Single);
        }
    }

Answer 3

我知道问题是C＃代码，但是我想为那些喜欢使用Shell快速检查MSMQ内容的人提供Powershell脚本。如果有人正在寻找可以提取这些WCF消息的脚本，则可以使用Edward的代码与Powershell一起工作，该脚本使用协议绑定NetMsmqbinding或NetMsmqIntegrationBinding来作为有效负载发送到带有端点的WCF服务。

我使用了另一个我知道在大多数情况下就足够的大整数值，而不是使用Int32.MaxValue。顺便说一句，很高兴知道找到肥皂信封的逻辑。

这是Powershell脚本：

[System.Reflection.Assembly]::LoadWithPartialName("System.Messaging") | Out-Null
[System.Reflection.Assembly]::LoadWithPartialName("System.Xml") | Out-Null
[System.Reflection.Assembly]::LoadWithPartialName("System.ServiceModel") | Out-Null
[System.Reflection.Assembly]::LoadWithPartialName("System.IO") | Out-Null


$queuePath = ".\private$\demoqueue4"

Write-Host "Powershell MSMQ queue WCF inspector v0.1. Inspecting queue contents of the queue: $queuePath"
Write-Host ""


Run-MainDemoIterateMsmq $queuePath



Function Get-XmlFromWcfMessage([System.Messaging.Message] $msg) {

    $doc = New-Object System.Xml.XmlDocument;
    $messageLength = [int] $msg.BodyStream.Length


    $buffer = New-Object byte[] $messageLength


    $msg.BodyStream.Read($buffer, 0, $messageLength)

    $envelopeStart = Find-SoapEnvelopeStart($buffer)

    $envelopeStart = $envelopeStart - 0

    $envelopeLength = $($buffer.Length - $envelopeStart)
    #Write-Host $envelopeStart


    $stream = New-Object System.IO.MemoryStream($buffer, $envelopeStart, $envelopeLength)

    $elm = New-Object System.ServiceModel.Channels.BinaryMessageEncodingBindingElement
    $elm.ReaderQuotas.MaxStringContentLength = 10000000
    $elm.ReaderQuotas.MaxBytesPerRead = 10000000


    $msg1 = $elm.CreateMessageEncoderFactory().Encoder.ReadMessage($stream, 10000000);

    $doc.Load($msg1.GetReaderAtBodyContents());

    $msg.BodyStream.Position = 0;



    return $doc;
}

Function Find-SoapEnvelopeStart([byte[]] $stream)
{
    $i = 0;
    $j = 0;
    $prevByte = $stream[$i];
    $curByte = [byte]$j;
    for ($i = 0; $i -lt $stream.Length; $i++)
    {
        $curByte = $stream[$i];
        if ($curByte -eq [byte] 0x02 -and $prevByte -eq [byte] 0x56) {
            break;
        }
        $prevByte = $curByte;
    }
    return $i - 1;
}


Function Run-MainDemoIterateMsmq([string] $queuePath) {

$queue = New-Object System.Messaging.MessageQueue $queuePath

foreach ($message in $queue.GetAllMessages()){
  $xmlDoc = Get-XmlFromWcfMessage $message 
  Write-Host $xmlDoc.OuterXml
 } 


}

输出例如如下所示：

    <SendMessage xmlns="http://tempuri.org/"><message>this is another test!</message></SendMessage>
    <SendMessage xmlns="http://tempuri.org/"><message>why hello srmp</message></SendMessage>
    <SendMessage xmlns="http://tempuri.org/"><message>test</message></SendMessage>
    <SendMessage xmlns="http://tempuri.org/"><message>my message to msmq</message></SendMessage>
    <SendMessage xmlns="http://tempuri.org/"><message>This is a new message!</message></SendMessage>
    <SendMessage xmlns="http://tempuri.org/"><message>Another message to MSMQ! </message></SendMessage>
    <SendMessage xmlns="http://tempuri.org/"><message>another test here</message></SendMessage>
    <SendMessage xmlns="http://tempuri.org/"><message>This is a test message that will be sent using NetMsmqBinding. </message></SendMessage>
    <SendMessageDataContract xmlns="http://tempuri.org/"><message xmlns:b="http://schemas.datacontract.org/2004/07/WcfDemoNetMsmqBinding.Host" xmlns:i="http://www.w3.org/2001
    /XMLSchema-instance"><b:BoolValue>true</b:BoolValue><b:StringValue>This is a test of a stringvalue for a CompositeType</b:StringValue></message></SendMessageDataContract>

从C＃读取WCF MSMQ消息

3 个答案: