在严格模式时行为是否正确，对于格式M/D/YYYY，moment.js会接受01.09.2017？如果只有1.9.2017＆＃34;那么它不应该只接受M D格式？同样适用于moment('1/09/2017', 'MM/D/YYYY', true).isValid() // false
moment('01/09/2017', 'M/D/YYYY', true).isValid() // true -> why?
天。
修改
M 01为什么MM是仁慈的，但1不是<?xml version="1.0" encoding="UTF-8" ?>
<config>
<luceneMatchVersion>6.4.1</luceneMatchVersion>
<lib dir="${solr.install.dir:../../../..}/contrib/extraction/lib" regex=".*\.jar" />
<lib dir="${solr.install.dir:../../../..}/dist/" regex="solr-cell-\d.*\.jar" />
<lib dir="${solr.install.dir:../../../..}/contrib/clustering/lib/" regex=".*\.jar" />
<lib dir="${solr.install.dir:../../../..}/dist/" regex="solr-clustering-\d.*\.jar" />
<lib dir="${solr.install.dir:../../../..}/contrib/langid/lib/" regex=".*\.jar" />
<lib dir="${solr.install.dir:../../../..}/dist/" regex="solr-langid-\d.*\.jar" />
<lib dir="${solr.install.dir:../../../..}/contrib/velocity/lib" regex=".*\.jar" />
<lib dir="${solr.install.dir:../../../..}/dist/" regex="solr-velocity-\d.*\.jar" />
<!-- an exact 'path' can be used instead of a 'dir' to specify a
specific jar file. This will cause a serious error to be logged
if it can't be loaded.
-->
<!--
<lib path="../a-jar-that-does-not-exist.jar" />
-->
<!-- Data Directory
Used to specify an alternate directory to hold all index data
other than the default ./data under the Solr home. If
replication is in use, this should match the replication
configuration.
-->
<dataDir>${solr.data.dir:}</dataDir>
<directoryFactory name="DirectoryFactory"
class="${solr.directoryFactory:solr.NRTCachingDirectoryFactory}"/>
<codecFactory class="solr.SchemaCodecFactory"/>
<!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Index Config - These settings control low-level behavior of indexing
Most example settings here show the default value, but are commented
out, to more easily see where customizations have been made.
Note: This replaces <indexDefaults> and <mainIndex> from older versions
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -->
<indexConfig>
</indexConfig>
<updateHandler class="solr.DirectUpdateHandler2">
<updateLog>
<str name="dir">${solr.ulog.dir:}</str>
<int name="numVersionBuckets">${solr.ulog.numVersionBuckets:65536}</int>
</updateLog>
<autoCommit>
<maxDocs>15000</maxDocs>
<!-- I suspect This make slow updates !!!!!!!
<maxTime>60000</maxTime>
-->
<openSearcher>false</openSearcher>
</autoCommit>
<autoSoftCommit>
<maxTime>${solr.autoSoftCommit.maxTime:-1}</maxTime>
</autoSoftCommit>
</updateHandler>
<query>
<maxBooleanClauses>1024</maxBooleanClauses>
<filterCache class="solr.FastLRUCache"
size="512"
initialSize="512"
autowarmCount="0"/>
<queryResultCache class="solr.LRUCache"
size="512"
initialSize="512"
autowarmCount="0"/>
<documentCache class="solr.LRUCache"
size="512"
initialSize="512"
autowarmCount="0"/>
<!-- custom cache currently used by block join -->
<cache name="perSegFilter"
class="solr.search.LRUCache"
size="10"
initialSize="0"
autowarmCount="10"
regenerator="solr.NoOpRegenerator" />
<enableLazyFieldLoading>true</enableLazyFieldLoading>
<queryResultWindowSize>40</queryResultWindowSize>
<!-- Maximum number of documents to cache for any entry in the
queryResultCache.
-->
<queryResultMaxDocsCached>200</queryResultMaxDocsCached>
<listener event="newSearcher" class="solr.QuerySenderListener">
<arr name="queries">
<!--
<lst><str name="q">solr</str><str name="sort">price asc</str></lst>
<lst><str name="q">rocks</str><str name="sort">weight asc</str></lst>
-->
</arr>
</listener>
<listener event="firstSearcher" class="solr.QuerySenderListener">
<arr name="queries">
<!--
<lst>
<str name="q">static firstSearcher warming in solrconfig.xml</str>
</lst>
-->
</arr>
</listener>
<useColdSearcher>false</useColdSearcher>
<maxWarmingSearchers>12</maxWarmingSearchers>
</query>
<requestDispatcher handleSelect="false" >
<requestParsers enableRemoteStreaming="true"
multipartUploadLimitInKB="2048000"
formdataUploadLimitInKB="2048"
addHttpRequestToContext="false"/>
<!-- HTTP Caching
Set HTTP caching related parameters (for proxy caches and clients).
The options below instruct Solr not to output any HTTP Caching
related headers
-->
<httpCaching never304="true" />
</requestDispatcher>
<!-- Used for more likt this videos related -->
<requestHandler name="/mlt" class="solr.MoreLikeThisHandler" >
<lst name="defaults"><!--
<str name="mlt.fl">title</str> -->
<str name="mlt">true</str>
<str name="mlt.mintf">1</str>
<!-- <str name="mlt.mindf">2</str> -->
<!-- <str name="mlt.minwl">4</str> -->
<!-- <str name="mlt.boost">true</str> -->
<str name="mlt.count">100</str>
<str name="mlt.match.include">false</str>
<str name="echoParams">all</str>
</lst>
</requestHandler>
<!-- Suggestions in search input -->
<!-- need call curl http://127.0.0.1:8983/solr/collection1/suggest?suggest.build=true (put in cron)-->
<searchComponent name="suggest" class="solr.SuggestComponent">
<lst name="suggester">
<str name="name">suggest</str>
<str name="lookupImpl">FreeTextLookupFactory</str>
<str name="dictionaryImpl">DocumentDictionaryFactory</str>
<str name="field">term_suggest</str>
<str name="ngrams">3</str>
<float name="threshold">0.004</float>
<str name="highlight">false</str>
<str name="buildOnCommit">false</str>
<str name="buildOnStartup">false</str>
<str name="separator"> </str>
<str name="suggestFreeTextAnalyzerFieldType">text_suggest</str>
<str name="queryAnalyzerFieldType">phrase_suggest</str>
</lst>
</searchComponent>
<requestHandler name="/suggest" class="solr.SearchHandler" startup="lazy" >
<lst name="defaults">
<str name="suggest.dictionary">suggest</str>
<str name="suggest">true</str>
<str name="suggest.count">10</str>
</lst>
<arr name="components">
<str>suggest</str>
</arr>
</requestHandler>
<requestHandler name="/select" class="solr.SearchHandler">
<!-- default values for query parameters can be specified, these
will be overridden by parameters in the request
-->
<lst name="defaults">
<str name="echoParams">explicit</str>
<int name="rows">10</int>
<str name="df">text</str>
</lst>
</requestHandler>
<!-- A request handler that returns indented JSON by default -->
<requestHandler name="/query" class="solr.SearchHandler">
<lst name="defaults">
<str name="echoParams">explicit</str>
<str name="wt">json</str>
<str name="indent">true</str>
</lst>
</requestHandler>
<requestHandler name="/browse" class="solr.SearchHandler" useParams="query,facets,velocity,browse">
<lst name="defaults">
<str name="echoParams">explicit</str>
</lst>
</requestHandler>
<initParams path="/update/**,/query,/select,/tvrh,/elevate,/spell,/browse">
<lst name="defaults">
<str name="df">_text_</str>
</lst>
</initParams>
<initParams path="/update/**">
<lst name="defaults">
<str name="update.chain">add-unknown-fields-to-the-schema</str>
</lst>
</initParams>
<!-- Solr Cell Update Request Handler
http://wiki.apache.org/solr/ExtractingRequestHandler
-->
<requestHandler name="/update/extract"
startup="lazy"
class="solr.extraction.ExtractingRequestHandler" >
<lst name="defaults">
<str name="lowernames">true</str>
<str name="fmap.meta">ignored_</str>
<str name="fmap.content">_text_</str>
</lst>
</requestHandler>
<!-- Spell Check
The spell check component can return a list of alternative spelling
suggestions.
http://wiki.apache.org/solr/SpellCheckComponent
-->
<searchComponent name="spellcheck" class="solr.SpellCheckComponent">
<str name="queryAnalyzerFieldType">text_general</str>
<!-- Multiple "Spell Checkers" can be declared and used by this
component
-->
<!-- a spellchecker built from a field of the main index -->
<lst name="spellchecker">
<str name="name">default</str>
<str name="field">_text_</str>
<str name="classname">solr.DirectSolrSpellChecker</str>
<!-- the spellcheck distance measure used, the default is the internal levenshtein -->
<str name="distanceMeasure">internal</str>
<!-- minimum accuracy needed to be considered a valid spellcheck suggestion -->
<float name="accuracy">0.5</float>
<!-- the maximum #edits we consider when enumerating terms: can be 1 or 2 -->
<int name="maxEdits">2</int>
<!-- the minimum shared prefix when enumerating terms -->
<int name="minPrefix">1</int>
<!-- maximum number of inspections per result. -->
<int name="maxInspections">5</int>
<!-- minimum length of a query term to be considered for correction -->
<int name="minQueryLength">4</int>
<!-- maximum threshold of documents a query term can appear to be considered for correction -->
<float name="maxQueryFrequency">0.01</float>
<!-- uncomment this to require suggestions to occur in 1% of the documents
<float name="thresholdTokenFrequency">.01</float>
-->
</lst>
<!-- a spellchecker that can break or combine words. See "/spell" handler below for usage -->
<!--
<lst name="spellchecker">
<str name="name">wordbreak</str>
<str name="classname">solr.WordBreakSolrSpellChecker</str>
<str name="field">name</str>
<str name="combineWords">true</str>
<str name="breakWords">true</str>
<int name="maxChanges">10</int>
</lst>
-->
</searchComponent>
<!-- A request handler for demonstrating the spellcheck component.
NOTE: This is purely as an example. The whole purpose of the
SpellCheckComponent is to hook it into the request handler that
handles your normal user queries so that a separate request is
not needed to get suggestions.
IN OTHER WORDS, THERE IS REALLY GOOD CHANCE THE SETUP BELOW IS
NOT WHAT YOU WANT FOR YOUR PRODUCTION SYSTEM!
See http://wiki.apache.org/solr/SpellCheckComponent for details
on the request parameters.
-->
<requestHandler name="/spell" class="solr.SearchHandler" startup="lazy">
<lst name="defaults">
<!-- Solr will use suggestions from both the 'default' spellchecker
and from the 'wordbreak' spellchecker and combine them.
collations (re-written queries) can include a combination of
corrections from both spellcheckers -->
<str name="spellcheck.dictionary">default</str>
<str name="spellcheck">on</str>
<str name="spellcheck.extendedResults">true</str>
<str name="spellcheck.count">10</str>
<str name="spellcheck.alternativeTermCount">5</str>
<str name="spellcheck.maxResultsForSuggest">5</str>
<str name="spellcheck.collate">true</str>
<str name="spellcheck.collateExtendedResults">true</str>
<str name="spellcheck.maxCollationTries">10</str>
<str name="spellcheck.maxCollations">5</str>
</lst>
<arr name="last-components">
<str>spellcheck</str>
</arr>
</requestHandler>
<!-- Term Vector Component
http://wiki.apache.org/solr/TermVectorComponent
-->
<searchComponent name="tvComponent" class="solr.TermVectorComponent"/>
<!-- A request handler for demonstrating the term vector component
This is purely as an example.
In reality you will likely want to add the component to your
already specified request handlers.
-->
<requestHandler name="/tvrh" class="solr.SearchHandler" startup="lazy">
<lst name="defaults">
<bool name="tv">true</bool>
</lst>
<arr name="last-components">
<str>tvComponent</str>
</arr>
</requestHandler>
<!-- Clustering Component. (Omitted here. See the default Solr example for a typical configuration.) -->
<!-- Terms Component
http://wiki.apache.org/solr/TermsComponent
A component to return terms and document frequency of those
terms
-->
<searchComponent name="terms" class="solr.TermsComponent"/>
<!-- A request handler for demonstrating the terms component -->
<requestHandler name="/terms" class="solr.SearchHandler" startup="lazy">
<lst name="defaults">
<bool name="terms">true</bool>
<bool name="distrib">false</bool>
</lst>
<arr name="components">
<str>terms</str>
</arr>
</requestHandler>
<!-- Query Elevation Component
http://wiki.apache.org/solr/QueryElevationComponent
a search component that enables you to configure the top
results for a given query regardless of the normal lucene
scoring.
-->
<searchComponent name="elevator" class="solr.QueryElevationComponent" >
<!-- pick a fieldType to analyze queries -->
<str name="queryFieldType">string</str>
<str name="config-file">elevate.xml</str>
</searchComponent>
<!-- A request handler for demonstrating the elevator component -->
<requestHandler name="/elevate" class="solr.SearchHandler" startup="lazy">
<lst name="defaults">
<str name="echoParams">explicit</str>
</lst>
<arr name="last-components">
<str>elevator</str>
</arr>
</requestHandler>
<!-- Highlighting Component
http://wiki.apache.org/solr/HighlightingParameters
-->
<searchComponent class="solr.HighlightComponent" name="highlight">
<highlighting>
<!-- Configure the standard fragmenter -->
<!-- This could most likely be commented out in the "default" case -->
<fragmenter name="gap"
default="true"
class="solr.highlight.GapFragmenter">
<lst name="defaults">
<int name="hl.fragsize">100</int>
</lst>
</fragmenter>
<!-- A regular-expression-based fragmenter
(for sentence extraction)
-->
<fragmenter name="regex"
class="solr.highlight.RegexFragmenter">
<lst name="defaults">
<!-- slightly smaller fragsizes work better because of slop -->
<int name="hl.fragsize">70</int>
<!-- allow 50% slop on fragment sizes -->
<float name="hl.regex.slop">0.5</float>
<!-- a basic sentence pattern -->
<str name="hl.regex.pattern">[-\w ,/\n\"']{20,200}</str>
</lst>
</fragmenter>
<!-- Configure the standard formatter -->
<formatter name="html"
default="true"
class="solr.highlight.HtmlFormatter">
<lst name="defaults">
<str name="hl.simple.pre"><![CDATA[<em>]]></str>
<str name="hl.simple.post"><![CDATA[</em>]]></str>
</lst>
</formatter>
<!-- Configure the standard encoder -->
<encoder name="html"
class="solr.highlight.HtmlEncoder" />
<!-- Configure the standard fragListBuilder -->
<fragListBuilder name="simple"
class="solr.highlight.SimpleFragListBuilder"/>
<!-- Configure the single fragListBuilder -->
<fragListBuilder name="single"
class="solr.highlight.SingleFragListBuilder"/>
<!-- Configure the weighted fragListBuilder -->
<fragListBuilder name="weighted"
default="true"
class="solr.highlight.WeightedFragListBuilder"/>
<!-- default tag FragmentsBuilder -->
<fragmentsBuilder name="default"
default="true"
class="solr.highlight.ScoreOrderFragmentsBuilder">
<!--
<lst name="defaults">
<str name="hl.multiValuedSeparatorChar">/</str>
</lst>
-->
</fragmentsBuilder>
<!-- multi-colored tag FragmentsBuilder -->
<fragmentsBuilder name="colored"
class="solr.highlight.ScoreOrderFragmentsBuilder">
<lst name="defaults">
<str name="hl.tag.pre"><![CDATA[
<b style="background:yellow">,<b style="background:lawgreen">,
<b style="background:aquamarine">,<b style="background:magenta">,
<b style="background:palegreen">,<b style="background:coral">,
<b style="background:wheat">,<b style="background:khaki">,
<b style="background:lime">,<b style="background:deepskyblue">]]></str>
<str name="hl.tag.post"><![CDATA[</b>]]></str>
</lst>
</fragmentsBuilder>
<boundaryScanner name="default"
default="true"
class="solr.highlight.SimpleBoundaryScanner">
<lst name="defaults">
<str name="hl.bs.maxScan">10</str>
<str name="hl.bs.chars">.,!? 	 </str>
</lst>
</boundaryScanner>
<boundaryScanner name="breakIterator"
class="solr.highlight.BreakIteratorBoundaryScanner">
<lst name="defaults">
<!-- type should be one of CHARACTER, WORD(default), LINE and SENTENCE -->
<str name="hl.bs.type">WORD</str>
<!-- language and country are used when constructing Locale object. -->
<!-- And the Locale object will be used when getting instance of BreakIterator -->
<str name="hl.bs.language">en</str>
<str name="hl.bs.country">US</str>
</lst>
</boundaryScanner>
</highlighting>
</searchComponent>
<!-- Update Processors
Chains of Update Processor Factories for dealing with Update
Requests can be declared, and then used by name in Update
Request Processors
http://wiki.apache.org/solr/UpdateRequestProcessor
-->
<!-- Add unknown fields to the schema
An example field type guessing update processor that will
attempt to parse string-typed field values as Booleans, Longs,
Doubles, or Dates, and then add schema fields with the guessed
field types.
This requires that the schema is both managed and mutable, by
declaring schemaFactory as ManagedIndexSchemaFactory, with
mutable specified as true.
See http://wiki.apache.org/solr/GuessingFieldTypes
-->
<!-- https://cwiki.apache.org/confluence/display/solr/Schema+Factory+Definition+in+SolrConfig#SchemaFactoryDefinitioninSolrConfig-Switchingfromschema.xmltoManagedSchema -->
<schemaFactory class="ClassicIndexSchemaFactory"/>
<updateRequestProcessorChain name="add-unknown-fields-to-the-schema">
<!-- UUIDUpdateProcessorFactory will generate an id if none is present in the incoming document -->
<processor class="solr.UUIDUpdateProcessorFactory" />
<processor class="solr.RemoveBlankFieldUpdateProcessorFactory"/>
<processor class="solr.FieldNameMutatingUpdateProcessorFactory">
<str name="pattern">[^\w-\.]</str>
<str name="replacement">_</str>
</processor>
<processor class="solr.ParseBooleanFieldUpdateProcessorFactory"/>
<processor class="solr.ParseLongFieldUpdateProcessorFactory"/>
<processor class="solr.ParseDoubleFieldUpdateProcessorFactory"/>
<processor class="solr.ParseDateFieldUpdateProcessorFactory">
<arr name="format">
<str>yyyy-MM-dd'T'HH:mm:ss.SSSZ</str>
<str>yyyy-MM-dd'T'HH:mm:ss,SSSZ</str>
<str>yyyy-MM-dd'T'HH:mm:ss.SSS</str>
<str>yyyy-MM-dd'T'HH:mm:ss,SSS</str>
<str>yyyy-MM-dd'T'HH:mm:ssZ</str>
<str>yyyy-MM-dd'T'HH:mm:ss</str>
<str>yyyy-MM-dd'T'HH:mmZ</str>
<str>yyyy-MM-dd'T'HH:mm</str>
<str>yyyy-MM-dd HH:mm:ss.SSSZ</str>
<str>yyyy-MM-dd HH:mm:ss,SSSZ</str>
<str>yyyy-MM-dd HH:mm:ss.SSS</str>
<str>yyyy-MM-dd HH:mm:ss,SSS</str>
<str>yyyy-MM-dd HH:mm:ssZ</str>
<str>yyyy-MM-dd HH:mm:ss</str>
<str>yyyy-MM-dd HH:mmZ</str>
<str>yyyy-MM-dd HH:mm</str>
<str>yyyy-MM-dd</str>
</arr>
</processor>
<!-- <processor class="solr.AddSchemaFieldsUpdateProcessorFactory">
<str name="defaultFieldType">strings</str>
<lst name="typeMapping">
<str name="valueClass">java.lang.Boolean</str>
<str name="fieldType">booleans</str>
</lst>
<lst name="typeMapping">
<str name="valueClass">java.util.Date</str>
<str name="fieldType">tdates</str>
</lst>
<lst name="typeMapping">
<str name="valueClass">java.lang.Long</str>
<str name="valueClass">java.lang.Integer</str>
<str name="fieldType">tlongs</str>
</lst>
<lst name="typeMapping">
<str name="valueClass">java.lang.Number</str>
<str name="fieldType">tdoubles</str>
</lst>
</processor> -->
<processor class="solr.LogUpdateProcessorFactory"/>
<processor class="solr.DistributedUpdateProcessorFactory"/>
<processor class="solr.RunUpdateProcessorFactory"/>
</updateRequestProcessorChain>
<queryResponseWriter name="json" class="solr.JSONResponseWriter">
<!-- For the purposes of the tutorial, JSON responses are written as
plain text so that they are easy to read in *any* browser.
If you expect a MIME type of "application/json" just remove this override.
-->
<str name="content-type">text/plain; charset=UTF-8</str>
</queryResponseWriter>
<!--
Custom response writers can be declared as needed...
-->
<queryResponseWriter name="velocity" class="solr.VelocityResponseWriter" startup="lazy">
<str name="template.base.dir">${velocity.template.base.dir:}</str>
<str name="solr.resource.loader.enabled">${velocity.solr.resource.loader.enabled:true}</str>
<str name="params.resource.loader.enabled">${velocity.params.resource.loader.enabled:false}</str>
</queryResponseWriter>
<!-- XSLT response writer transforms the XML output by any xslt file found
in Solr's conf/xslt directory. Changes to xslt files are checked for
every xsltCacheLifetimeSeconds.
-->
<queryResponseWriter name="xslt" class="solr.XSLTResponseWriter">
<int name="xsltCacheLifetimeSeconds">5</int>
</queryResponseWriter>
</config>
？这是一个错误吗？
答案 0 :(得分：0)
它的工作方式可能不正确。在你的例子中它工作正常，但在其他情况下它可能会产生错误的结果。 Moment format doc
moment("01.09.2017", "M/D/YYYY").format("M/D/YYYY");
//"1/9/2017"
moment("02-25-1995", "MMM/D/YY").format("MM/DD/YYYY");
//"01/02/2025"
如果需要指定多种格式，可以通过将第二个参数设置为字符串格式数组来实现。 Moment multiple format
moment("29-06-1995", ["MM-DD-YYYY", "DD-MM", "DD-MM-YYYY"]); // uses the last format
moment("05-06-1995", ["MM-DD-YYYY", "DD-MM-YYYY"]); // uses the first format
对于严格模式：此参数对正则表达式有影响，解析数据和数字它将正常工作。
//Non strict regular
Hb = /\d\d?/
//Strict regular
Sb = /\d\d/
d = b._strict;
case"MM":
case"DD":
case"YY":
case"GG":
case"gg":
case"HH":
case"hh":
case"mm":
case"ss":
case"ww":
case"WW":
return d ? Sb : Hb;
如果一封信总是使用非严格的常规
case"M":
case"D":
case"d":
case"H":
case"h":
case"m":
case"s":
case"w":
case"W":
case"e":
case"E":
return Hb;
如果
，则严格模式将失败moment("1/9/1990", "MM/MD/YYYY", true).format("M/D/YYYY")
"Invalid date"
这一切都是在momentjs 2.7.0版本上测试的
新版本的时刻2.17.1格式['MMM', 'MMMM'], ['dd', 'ddd', 'dddd']