Question

键入时，我在日志中的apache2上出现此错误：
/etc/init.d/apache2 reload

[2月14日星期二15：53：59.437078 2017] [ssl：emerg] [pid 15072] AH02580：初始化：关键词www.XXX.com:443:0通行短语不正确 [2月14日星期二15：53：59.437128 2017] [ssl：emerg] [pid 15072] SSL库错误：错误：0D0680A8：asn1编码例程：ASN1_CHECK_TLEN：标记错误
[2月14日星期二15：53：59.437137 2017] [ssl：emerg] [pid 15072] SSL库错误：错误：0D08303A：asn1编码例程：ASN1_TEMPLATE_NOEXP_D2I：嵌套asn1错误
[2月14日星期二15：53：59.437143 2017] [ssl：emerg] [pid 15072] SSL库错误：错误：0D0680A8：asn1编码例程：ASN1_CHECK_TLEN：标记错误
[2月14日星期二15：53：59.437150 2017] [ssl：emerg] [pid 15072] SSL库错误：错误：0D07803A：asn1编码例程：ASN1_ITEM_EX_D2I：嵌套asn1错误（类型= RSA）
[2月14日星期二15：53：59.437157 2017] [ssl：emerg] [pid 15072] SSL库错误：错误：04093004：rsa例程：OLD_RSA_PRIV_DECODE：RSA lib
[2月14日星期二15：53：59.437163 2017] [ssl：emerg] [pid 15072] SSL库错误：错误：0D0680A8：asn1编码例程：ASN1_CHECK_TLEN：标记错误
[2月14日星期二15：53：59.437169 2017] [ssl：emerg] [pid 15072] SSL库错误：错误：0D07803A：asn1编码例程：ASN1_ITEM_EX_D2I：嵌套asn1错误（类型= PKCS8_PRIV_KEY_INFO）
[2月14日星期二15：53：59.437174 2017] [ssl：emerg] [pid 15072] AH02311：初始化mod_ssl致命错误，退出。有关更多信息，请参阅/var/log/apache2/error.log [2月14日星期二15：53：59.437177 2017] [ssl：emerg] [pid 15072] AH02564：无法配置加密（？）私钥www.XXX.com:443:0，请检查/root/www.XXXX.com .KEY
AH00016：配置失败

请注意，/etc/init.d/apache2 restart效果很好。

我使用以下方法在服务器上创建了密钥：
genrsa -des3 -out www.XXXX.com 2048 +密码

我使用以下方法创建了csr：
req -new -key la_cle -out the_file

默认网站配置为 000-default.conf 和 default-ssl.conf 文件：

<Directory /var/www/html/>
    Order allow,deny
    Deny from all
    Require all granted
</Directory>

# The ServerName directive sets the request scheme, hostname and port that
# the server uses to identify itself. This is used when creating
# redirection URLs. In the context of virtual hosts, the ServerName
# specifies what hostname must appear in the request's Host: header to
# match this virtual host. For the default virtual host (this file) this
# value is not decisive as it is used as a last resort host regardless.
# However, you must set it for any further virtual host explicitly.
#ServerName www.example.com

ServerAdmin webmaster@localhost
DocumentRoot /var/www/html

# Available loglevels: trace8, ..., trace1, debug, info, notice, warn,
# error, crit, alert, emerg.
# It is also possible to configure the loglevel for particular
# modules, e.g.
#LogLevel info ssl:warn

ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined

# For most configuration files from conf-available/, which are
# enabled or disabled at a global level, it is possible to
# include a line for only one particular virtual host. For example the
# following line enables the CGI configuration for this host only
# after it has been globally disabled with "a2disconf".
#Include conf-available/serve-cgi-bin.conf

#vim：syntax = apache ts = 4 sw = 4 sts = 4 sr noet

    ServerAdmin webmaster@localhost

    DocumentRoot /var/www/html
    ServerName www.XXXX.com
    SSLEngine on
    SSLCertificateFile /root/www.XXXX.com.crt
    SSLCertificateKeyFile /root/www.XXXX.com.key
    SSLCertificateChainFile /root/inter.www.XXXX.com.crt
    # Available loglevels: trace8, ..., trace1, debug, info, notice, warn,
    # error, crit, alert, emerg.
    # It is also possible to configure the loglevel for particular
    # modules, e.g.
    #LogLevel info ssl:warn

    ErrorLog ${APACHE_LOG_DIR}/error.log
    CustomLog ${APACHE_LOG_DIR}/access.log combined

    # For most configuration files from conf-available/, which are
    # enabled or disabled at a global level, it is possible to
    # include a line for only one particular virtual host. For example the
    # following line enables the CGI configuration for this host only
    # after it has been globally disabled with "a2disconf".
    #Include conf-available/serve-cgi-bin.conf

    #   SSL Engine Switch:
    #   Enable/Disable SSL for this virtual host.
    SSLEngine on

    #   A self-signed (snakeoil) certificate can be created by installing
    #   the ssl-cert package. See
    #   /usr/share/doc/apache2/README.Debian.gz for more info.
    #   If both key and certificate are stored in the same file, only the
    #   SSLCertificateFile directive is needed.
    SSLCertificateFile  /etc/ssl/certs/ssl-cert-snakeoil.pem
    SSLCertificateKeyFile /etc/ssl/private/ssl-cert-snakeoil.key

    #   Server Certificate Chain:
    #   Point SSLCertificateChainFile at a file containing the
    #   concatenation of PEM encoded CA certificates which form the
    #   certificate chain for the server certificate. Alternatively
    #   the referenced file can be the same as SSLCertificateFile
    #   when the CA certificates are directly appended to the server
    #   certificate for convinience.
    #SSLCertificateChainFile /etc/apache2/ssl.crt/server-ca.crt

    #   Certificate Authority (CA):
    #   Set the CA certificate verification path where to find CA
    #   certificates for client authentication or alternatively one
    #   huge file containing all of them (file must be PEM encoded)
    #   Note: Inside SSLCACertificatePath you need hash symlinks
    #        to point to the certificate files. Use the provided
    #        Makefile to update the hash symlinks after changes.
    #SSLCACertificatePath /etc/ssl/certs/
    #SSLCACertificateFile /etc/apache2/ssl.crt/ca-bundle.crt

    #   Certificate Revocation Lists (CRL):
    #   Set the CA revocation path where to find CA CRLs for client
    #   authentication or alternatively one huge file containing all
    #   of them (file must be PEM encoded)
    #   Note: Inside SSLCARevocationPath you need hash symlinks
    #        to point to the certificate files. Use the provided
    #        Makefile to update the hash symlinks after changes.
    #SSLCARevocationPath /etc/apache2/ssl.crl/
    #SSLCARevocationFile /etc/apache2/ssl.crl/ca-bundle.crl

    #   Client Authentication (Type):
    #   Client certificate verification type and depth.  Types are
    #   none, optional, require and optional_no_ca.  Depth is a
    #   number which specifies how deeply to verify the certificate
    #   issuer chain before deciding the certificate is not valid.
    #SSLVerifyClient require
    #SSLVerifyDepth  10

    #   SSL Engine Options:
    #   Set various options for the SSL engine.
    #   o FakeBasicAuth:
    #    Translate the client X.509 into a Basic Authorisation.  This means that
    #    the standard Auth/DBMAuth methods can be used for access control.  The
    #    user name is the `one line' version of the client's X.509 certificate.
    #    Note that no password is obtained from the user. Every entry in the user
    #    file needs this password: `xxj31ZMTZzkVA'.
    #   o ExportCertData:
    #    This exports two additional environment variables: SSL_CLIENT_CERT and
    #    SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
    #    server (always existing) and the client (only existing when client
    #    authentication is used). This can be used to import the certificates
    #    into CGI scripts.
    #   o StdEnvVars:
    #    This exports the standard SSL/TLS related `SSL_*' environment variables.
    #    Per default this exportation is switched off for performance reasons,
    #    because the extraction step is an expensive operation and is usually
    #    useless for serving static content. So one usually enables the
    #    exportation for CGI and SSI requests only.
    #   o OptRenegotiate:
    #    This enables optimized SSL connection renegotiation handling when SSL
    #    directives are used in per-directory context.
    #SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
    <FilesMatch "\.(cgi|shtml|phtml|php)$">
            SSLOptions +StdEnvVars
    </FilesMatch>
    <Directory /usr/lib/cgi-bin>
            SSLOptions +StdEnvVars
    </Directory>

    #   SSL Protocol Adjustments:
    #   The safe and default but still SSL/TLS standard compliant shutdown
    #   approach is that mod_ssl sends the close notify alert but doesn't wait for
    #   the close notify alert from client. When you need a different shutdown
    #   approach you can use one of the following variables:
    #   o ssl-unclean-shutdown:
    #    This forces an unclean shutdown when the connection is closed, i.e. no
    #    SSL close notify alert is send or allowed to received.  This violates
    #    the SSL/TLS standard but is needed for some brain-dead browsers. Use
    #    this when you receive I/O errors because of the standard approach where
    #    mod_ssl sends the close notify alert.
    #   o ssl-accurate-shutdown:
    #    This forces an accurate shutdown when the connection is closed, i.e. a
    #    SSL close notify alert is send and mod_ssl waits for the close notify
    #    alert of the client. This is 100% SSL/TLS standard compliant, but in
    #    practice often causes hanging connections with brain-dead browsers. Use
    #    this only for browsers where you know that their SSL implementation
    #    works correctly.
    #   Notice: Most problems of broken clients are also related to the HTTP
    #   keep-alive facility, so you usually additionally want to disable
    #   keep-alive for those clients, too. Use variable "nokeepalive" for this.
    #   Similarly, one has to force some clients to use HTTP/1.0 to workaround
    #   their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
    #   "force-response-1.0" for this.
    BrowserMatch "MSIE [2-6]" \
            nokeepalive ssl-unclean-shutdown \
            downgrade-1.0 force-response-1.0
    # MSIE 7 and newer should be able to use keepalive
    BrowserMatch "MSIE [17-9]" ssl-unclean-shutdown

</VirtualHost>

#vim：syntax = apache ts = 4 sw = 4 sts = 4 sr noet

在 apache2.conf 文件中，我创建了一个密码为SSLPassPhraseDialog exec:/root/key-pem的脚本。

我无法理解为什么它不起作用。

Answer 1

对法语部分感到抱歉。我不认为问题是来自我的脚本我传递给sslpassdialogphrase因为如果我踢它并且我手动输入密码它仍然无法正常工作。另外，我在另一台服务器上进行配置，并且可以正常工作。问题总是一样的。 www.xxxx.com.key上存在不匹配值，我无法理解原因。我试图创建自己的自我证书，它的工作原理。如果我的自签名证书存在同样的问题，那么我可能会错误地输入密码，但似乎我没有...

重新加载失败 - Ubuntu 15.04 - SSL PassPhrase init

1 个答案: